On 08/15/2012 05:05 PM, Anthony Olech wrote:
> This is the ADC component driver of the Dialog DA9058 PMIC.
> This driver is just one component of the whole DA9058 PMIC
> driver. It depends on the DA9058 CORE component driver.
> The HWMON and BATTERY component drivers depend on this ADC
> component driver.
>
> This component driver recieves the actual platform data from
> the DA9058 CORE driver, whose settings may be overridden from
> the platform data supplied from the machine driver, but that
> config data has the nature of overides from sensible default
> values. Thus it is not essential to provide any real platform
> data at all.
>
> Signed-off-by: Anthony Olech <[email protected]>
> Signed-off-by: David Dajun Chen <[email protected]>
> ---
> drivers/iio/adc/Kconfig | 10 +
> drivers/iio/adc/Makefile | 1 +
> drivers/iio/adc/da9058-adc.c | 397
> ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 408 insertions(+), 0 deletions(-)
> create mode 100644 drivers/iio/adc/da9058-adc.c
>
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index 9a0df81..54077d2 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -13,4 +13,14 @@ config AT91_ADC
> help
> Say yes here to build support for Atmel AT91 ADC.
>
> +config DA9058_ADC
> + tristate "Dialog DA9058 PMIC ADC"
> + select IIO_BUFFER
> + select IIO_KFIFO_BUF
You don't seem to have buffer support in your driver at this moment.
> + select IIO_TRIGGER
> + select SYSFS
> + help
> + Say yes here to build support for the ADC component of the DAILOG
> + DA9058 PMCI
> +
> endmenu
> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> index 175c8d4..5cfc4de 100644
> --- a/drivers/iio/adc/Makefile
> +++ b/drivers/iio/adc/Makefile
> @@ -3,3 +3,4 @@
> #
>
> obj-$(CONFIG_AT91_ADC) += at91_adc.o
> +obj-$(CONFIG_DA9058_ADC) += da9058-adc.o
> diff --git a/drivers/iio/adc/da9058-adc.c b/drivers/iio/adc/da9058-adc.c
> new file mode 100644
> index 0000000..4053b7b
> --- /dev/null
> +++ b/drivers/iio/adc/da9058-adc.c
> @@ -0,0 +1,397 @@
> +/*
> + * Copyright (C) 2012 Dialog Semiconductor Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/interrupt.h>
> +#include <linux/iio/iio.h>
> +#include <linux/regmap.h>
You are not using regmap directly in this file. I'm wondering a bit though why,
since da9058_reg_read and friends just seem to wrap the regmap functions.
> +#include <linux/mfd/core.h>
> +
> +#include <linux/mfd/da9058/core.h>
> +#include <linux/mfd/da9058/registers.h>
> +#include <linux/mfd/da9058/irq.h>
> +#include <linux/mfd/da9058/pdata.h>
> +#include <linux/mfd/da9058/adc.h>
> +#include <linux/mfd/da9058/conf.h>
> +#include <linux/mfd/da9058/version.h>
> +
> +struct da9058_adc {
> + struct da9058 *da9058;
> + struct platform_device *pdev;
pdev is never used, only assigned once.
> + struct rtc_device *rtc_dev;
rtc device?
> + int use_automatic_adc;
> + int irq;
> +};
> +
> +/*
> + * if the PMIC is in automatic ADC consersion mode we have the choice
> + * of just getting the last (automatic) conversion or doing a manual
> + * conversion anyway.
> + *
> + * if the PMIC is not in automatic ADC consersion mode we have no choice
> + * we just have to ignore the requested mode and just do a manual
> + * ADC conversion.
> + */
> +static int da9058_automatic_adc_conversion(struct da9058 *da9058,
> + const int channel, int *value)
> +{
> + unsigned int adc_msh, adc_lsh;
> + int ret;
> +
> + switch (channel) {
How is selected which channel is sampled in automatic mode? Or will it just go
round robin through the channels?
> + case DA9058_ADCMAN_MUXSEL_VBAT:
> + ret = da9058_reg_read(da9058, DA9058_VBATRES_REG_MSB,
> + &adc_msh);
> + if (ret)
> + return ret;
> +
> + ret = da9058_reg_read(da9058, DA9058_AUTORES_REG_1,
> + &adc_lsh);
> + if (ret)
> + return ret;
> +
> + *value = (adc_lsh & 0x0F) | (adc_msh << 4);
> +
> + return 0;
> + case DA9058_ADCMAN_MUXSEL_TEMP:
> + ret = da9058_reg_read(da9058, DA9058_TEMPRES_REG_MSB,
> + &adc_msh);
> + if (ret)
> + return ret;
> +
> + ret = da9058_reg_read(da9058, DA9058_AUTORES_REG_1,
> + &adc_lsh);
> + if (ret)
> + return ret;
> +
> + *value = (adc_lsh >> 4) | (adc_msh << 4);
> +
> + return 0;
> + case DA9058_ADCMAN_MUXSEL_VF:
> + ret = da9058_reg_read(da9058, DA9058_VREF_REG,
> + &adc_msh);
> + if (ret)
> + return ret;
> +
> + ret = da9058_reg_read(da9058, DA9058_AUTORES_REG_2,
> + &adc_lsh);
> + if (ret)
> + return ret;
> +
> + *value = (adc_lsh & 0x0F) | (adc_msh << 4);
> +
> + return 0;
> + case DA9058_ADCMAN_MUXSEL_ADCIN:
> + ret = da9058_reg_read(da9058, DA9058_ADCINRES_REG_MSB,
> + &adc_msh);
> + if (ret)
> + return ret;
> +
> + ret = da9058_reg_read(da9058, DA9058_AUTORES_REG_2,
> + &adc_lsh);
> + if (ret)
> + return ret;
> +
> + *value = (adc_lsh >> 4) | (adc_msh << 4);
> +
> + return 0;
> + case DA9058_ADCMAN_MUXSEL_TJUNC:
> + ret = da9058_reg_read(da9058, DA9058_TJUNCRES_REG,
> + &adc_msh);
> + if (ret)
> + return ret;
> +
> + ret = da9058_reg_read(da9058, DA9058_AUTORES_REG_3,
> + &adc_lsh);
> + if (ret)
> + return ret;
> +
> + *value = (adc_lsh >> 4) | (adc_msh << 4);
> +
> + return 0;
> + default:
> + dev_err(da9058->dev, "ADC Channel %d is reserved\n", channel);
> + return -EIO;
> + }
The different channels all have awfully similar code. This could be simplified
e.g. using a look-up table for the register addresses.
> +}
> +
> +static int da9058_manual_adc_conversion(struct da9058 *da9058,
> + const int channel, int *value)
> +{
> + unsigned int adc_msh, adc_lsh;
> + int ret;
> +
> + mutex_lock(&da9058->adc_mutex);
> +
> + ret = da9058_reg_write(da9058, DA9058_ADCMAN_REG,
> + DA9058_ADCMAN_MANCONV | channel);
> + if (ret < 0)
> + goto err;
> +
> + if (!wait_for_completion_timeout(&da9058->adc_read_done,
> + msecs_to_jiffies(500))) {
> + dev_err(da9058->dev,
> + "timeout waiting for ADC conversion interrupt\n");
> + ret = -ETIMEDOUT;
> + goto err;
> + }
> +
> + ret = da9058_reg_read(da9058, DA9058_ADCRESH_REG, &adc_msh);
> + if (ret < 0)
> + goto err;
> +
> + ret = da9058_reg_read(da9058, DA9058_ADCRESL_REG, &adc_lsh);
> + if (ret < 0)
> + goto err;
> +
> + *value = (adc_msh << 4) | (adc_lsh & 0x0F);
> +
> +err:
> + mutex_unlock(&da9058->adc_mutex);
> + return ret;
> +}
> +
> +static int da9058_adc_conversion_read(struct da9058 *da9058, const int
> channel,
> + int automatic_mode, int *value)
> +{
> + if (!value)
> + return -EINVAL;
> +
> + if (automatic_mode) {
> + unsigned int adc_ctrl;
> + int ret;
> +
> + ret = da9058_reg_read(da9058, DA9058_ADCCONT_REG, &adc_ctrl);
> + if (ret)
> + return ret;
> +
> + if (adc_ctrl & DA9058_ADCCONT_AUTOADCEN)
> + return da9058_automatic_adc_conversion(da9058,
> + channel, value);
> + else
> + return da9058_manual_adc_conversion(da9058,
> + channel, value);
> + } else {
> + return da9058_manual_adc_conversion(da9058, channel, value);
> + }
> +}
> +
> +static irqreturn_t da9058_adc_interrupt(int irq, void *data)
> +{
> + struct da9058 *da9058 = data;
> +
> + complete(&da9058->adc_read_done);
Is there any reason why adc_read_done needs to be in the da9058 struct and can
not be in the da9058_adc struct.
> +
> + return IRQ_HANDLED;
> +}
newline
> +static int da9058_adc_read_raw(struct iio_dev *idev,
> + struct iio_chan_spec const *chan, int *val, int *val2, long mask)
> +{
> + struct da9058_adc *adc = iio_priv(idev);
> + struct da9058 *da9058 = adc->da9058;
> + int ret;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + ret = da9058_adc_conversion_read(da9058, chan->channel,
> + adc->use_automatic_adc, val);
> + if (ret)
> + return ret;
> + else
> + return IIO_VAL_INT;
> + default:
> + return -EINVAL;
> + };
> +}
> +
> +static const struct iio_info da9058_adc_info = {
> + .driver_module = THIS_MODULE,
> + .read_raw = &da9058_adc_read_raw,
> +};
> +
> +struct iio_chan_spec da9058_adc_channels[] = {
const
> + {
> + .type = IIO_VOLTAGE,
> + .indexed = 1,
> + .channel = 0,
I'd use the same constants you use for the channel number in
da9058_automatic_adc_conversion, makes it easier to identify which channel is
which.
> + .scan_index = 0,
> + .scan_type.sign = 'u',
> + .scan_type.realbits = 12,
> + .scan_type.storagebits = 16,
> + .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT |
> + IIO_CHAN_INFO_RAW_SEPARATE_BIT,
> + },
> + {
> + .type = IIO_VOLTAGE,
> + .indexed = 1,
> + .channel = 1,
> + .scan_index = 1,
> + .scan_type.sign = 'u',
> + .scan_type.realbits = 12,
> + .scan_type.storagebits = 16,
> + .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT |
> + IIO_CHAN_INFO_RAW_SEPARATE_BIT,
> + },
> + {
> + .type = IIO_VOLTAGE,
> + .indexed = 1,
> + .channel = 2,
> + .scan_index = 2,
> + .scan_type.sign = 'u',
> + .scan_type.realbits = 12,
> + .scan_type.storagebits = 16,
> + .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT |
> + IIO_CHAN_INFO_RAW_SEPARATE_BIT,
> + },
> + {
> + .type = IIO_VOLTAGE,
> + .indexed = 1,
> + .channel = 3,
> + .scan_index = 3,
> + .scan_type.sign = 'u',
> + .scan_type.realbits = 12,
> + .scan_type.storagebits = 16,
> + .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT |
> + IIO_CHAN_INFO_RAW_SEPARATE_BIT,
> + },
> + {
> + .type = IIO_VOLTAGE,
> + .indexed = 1,
> + .channel = 4,
> + .scan_index = 4,
> + .scan_type.sign = 'u',
> + .scan_type.realbits = 12,
> + .scan_type.storagebits = 16,
> + .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT |
> + IIO_CHAN_INFO_RAW_SEPARATE_BIT,
> + },
> +
> +};
> +unsigned long da9058_scan_masks[] = {
> +
> + (1 << ARRAY_SIZE(da9058_adc_channels)) - 1,
This means your device can only scan all channels at once, while the code above
suggests that only one channel at a time can be scanned. But since scan_masks
are only relevant for buffer mode I'd just drop this.
> +};
> +
> +static int da9058_adc_probe(struct platform_device *pdev)
__devinit
> +{
> + struct da9058 *da9058 = dev_get_drvdata(pdev->dev.parent);
> + const struct mfd_cell *cell = mfd_get_cell(pdev);
> + struct da9058_adc_pdata *adc_pdata;
> + struct da9058_adc *adc;
> + struct iio_dev *idev;
for consistency please use indio_dev for the iio_dev variable name, this is
used althroughout IIO.
> + int ret;
> +
> + if (cell == NULL) {
> + ret = -ENODEV;
> + goto exit;
> + }
> +
> + if (da9058 == NULL) {
> + ret = -ENODEV;
> + goto exit;
> + }
> +
> + if (da9058->adc_read) {
> + ret = -EEXIST;
> + goto exit;
> + }
> +
> + adc_pdata = cell->platform_data;
> +
> + if (adc_pdata == NULL) {
> + ret = -EINVAL;
> + goto exit;
> + }
> +
> + idev = iio_device_alloc(sizeof(struct da9058_adc));
sizeof(*adc)
> + if (idev == NULL) {
> + ret = -ENOMEM;
> + goto error_ret;
> + }
> + adc = iio_priv(idev);
> +
> + platform_set_drvdata(pdev, idev);
> +
> + idev->dev.parent = &pdev->dev;
> + idev->name = dev_name(&pdev->dev);
> + idev->modes = INDIO_DIRECT_MODE;
> + idev->info = &da9058_adc_info;
> +
> + adc->irq = platform_get_irq(pdev, 0);
> + if (adc->irq < 0) {
> + dev_err(&pdev->dev, "can not get ADC IRQ error=%d\n",
> + adc->irq);
> + ret = -ENODEV;
> + goto error_free_device;
> + }
> +
> + idev->channels = da9058_adc_channels;
> + idev->num_channels = ARRAY_SIZE(da9058_adc_channels);
> + idev->available_scan_masks = da9058_scan_masks;
> + idev->masklength = ARRAY_SIZE(da9058_adc_channels);
> +
> + platform_set_drvdata(pdev, adc);
> + adc->da9058 = da9058;
> + adc->pdev = pdev;
> + adc->use_automatic_adc = adc_pdata->use_automatic_adc;
> + da9058->adc_read = da9058_adc_conversion_read;
What will the adc_read callback be used for?
> +
> + ret = iio_device_register(idev);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "Couldn't register the device.\n");
> + goto error_free_device;
> + }
> +
> + ret = request_threaded_irq(da9058_to_virt_irq_num(da9058, adc->irq),
> + NULL, da9058_adc_interrupt,
> + IRQF_TRIGGER_RISING | IRQF_ONESHOT,
> + "DA9058 ADC EOM", da9058);
> + if (ret)
> + goto failed_to_get_adc_interrupt;
> +
> + goto exit;
> +
> +failed_to_get_adc_interrupt:
> + iio_device_unregister(idev);
> +error_free_device:
> + platform_set_drvdata(pdev, NULL);
platform_set_drvdata(pdev, NULL) should not be neccessary
> + iio_device_free(idev);
> +exit:
> +error_ret:
> + return ret;
> +}
> +
> +static int __devexit da9058_adc_remove(struct platform_device *pdev)
> +{
> + struct iio_dev *idev = platform_get_drvdata(pdev);
> + struct da9058_adc *adc = iio_priv(idev);
> +
> + iio_device_unregister(idev);
> + free_irq(adc->irq, adc);
Does it work here without the irq number conversion and the devid parameter
does not match, you pass adc here and da9058 when you request it.
> + iio_device_free(idev);
> +
> + return 0;
> +}
> +
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
