This function pointer is used to call a system-specific function for disabling the IO-APIC. Currently this is used for IRQ remapping which has its own disable routine.
Signed-off-by: Joerg Roedel <[email protected]> --- arch/x86/include/asm/io_apic.h | 2 ++ arch/x86/include/asm/x86_init.h | 9 +++++---- arch/x86/kernel/apic/io_apic.c | 41 ++++++++++++++++++--------------------- arch/x86/kernel/x86_init.c | 9 +++++---- drivers/iommu/irq_remapping.c | 31 ++++++++++++++++++++++++++++- 5 files changed, 61 insertions(+), 31 deletions(-) diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h index 73d8c53..d59e172 100644 --- a/arch/x86/include/asm/io_apic.h +++ b/arch/x86/include/asm/io_apic.h @@ -179,6 +179,7 @@ extern void __init native_io_apic_init_mappings(void); extern unsigned int native_io_apic_read(unsigned int apic, unsigned int reg); extern void native_io_apic_write(unsigned int apic, unsigned int reg, unsigned int val); extern void native_io_apic_modify(unsigned int apic, unsigned int reg, unsigned int val); +extern void native_disable_io_apic(void); static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg) { @@ -223,6 +224,7 @@ static inline void disable_ioapic_support(void) { } #define native_io_apic_read NULL #define native_io_apic_write NULL #define native_io_apic_modify NULL +#define native_disable_io_apic NULL #endif #endif /* _ASM_X86_IO_APIC_H */ diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h index 38155f6..8e1b44c 100644 --- a/arch/x86/include/asm/x86_init.h +++ b/arch/x86/include/asm/x86_init.h @@ -189,10 +189,11 @@ struct x86_msi_ops { }; struct x86_io_apic_ops { - void (*init) (void); - unsigned int (*read) (unsigned int apic, unsigned int reg); - void (*write) (unsigned int apic, unsigned int reg, unsigned int value); - void (*modify)(unsigned int apic, unsigned int reg, unsigned int value); + void (*init) (void); + unsigned int (*read) (unsigned int apic, unsigned int reg); + void (*write) (unsigned int apic, unsigned int reg, unsigned int value); + void (*modify) (unsigned int apic, unsigned int reg, unsigned int value); + void (*disable)(void); }; extern struct x86_init_ops x86_init; diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index a6c64aa..b919f1e 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1925,30 +1925,14 @@ void __init enable_IO_APIC(void) clear_IO_APIC(); } -/* - * Not an __init, needed by the reboot code - */ -void disable_IO_APIC(void) +void native_disable_io_apic(void) { /* - * Clear the IO-APIC before rebooting: - */ - clear_IO_APIC(); - - if (!legacy_pic->nr_legacy_irqs) - return; - - /* * If the i8259 is routed through an IOAPIC * Put that IOAPIC in virtual wire mode * so legacy interrupts can be delivered. - * - * With interrupt-remapping, for now we will use virtual wire A mode, - * as virtual wire B is little complex (need to configure both - * IOAPIC RTE as well as interrupt-remapping table entry). - * As this gets called during crash dump, keep this simple for now. */ - if (ioapic_i8259.pin != -1 && !irq_remapping_enabled) { + if (ioapic_i8259.pin != -1) { struct IO_APIC_route_entry entry; memset(&entry, 0, sizeof(entry)); @@ -1968,12 +1952,25 @@ void disable_IO_APIC(void) ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry); } + if (cpu_has_apic || apic_from_smp_config()) + disconnect_bsp_APIC(ioapic_i8259.pin != -1); + +} + +/* + * Not an __init, needed by the reboot code + */ +void disable_IO_APIC(void) +{ /* - * Use virtual wire A mode when interrupt remapping is enabled. + * Clear the IO-APIC before rebooting: */ - if (cpu_has_apic || apic_from_smp_config()) - disconnect_bsp_APIC(!irq_remapping_enabled && - ioapic_i8259.pin != -1); + clear_IO_APIC(); + + if (!legacy_pic->nr_legacy_irqs) + return; + + x86_io_apic_ops.disable(); } #ifdef CONFIG_X86_32 diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c index 9f3167e..3ea56c2 100644 --- a/arch/x86/kernel/x86_init.c +++ b/arch/x86/kernel/x86_init.c @@ -120,8 +120,9 @@ struct x86_msi_ops x86_msi = { }; struct x86_io_apic_ops x86_io_apic_ops = { - .init = native_io_apic_init_mappings, - .read = native_io_apic_read, - .write = native_io_apic_write, - .modify = native_io_apic_modify, + .init = native_io_apic_init_mappings, + .read = native_io_apic_read, + .write = native_io_apic_write, + .modify = native_io_apic_modify, + .disable = native_disable_io_apic, }; diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c index 283a43f..f72a5e8 100644 --- a/drivers/iommu/irq_remapping.c +++ b/drivers/iommu/irq_remapping.c @@ -1,3 +1,4 @@ +#include <linux/cpumask.h> #include <linux/kernel.h> #include <linux/string.h> #include <linux/cpumask.h> @@ -6,6 +7,9 @@ #include <asm/hw_irq.h> #include <asm/irq_remapping.h> +#include <asm/processor.h> +#include <asm/x86_init.h> +#include <asm/apic.h> #include "irq_remapping.h" @@ -17,6 +21,24 @@ int no_x2apic_optout; static struct irq_remap_ops *remap_ops; +static void irq_remapping_disable_io_apic(void) +{ + /* + * With interrupt-remapping, for now we will use virtual wire A + * mode, as virtual wire B is little complex (need to configure + * both IOAPIC RTE as well as interrupt-remapping table entry). + * As this gets called during crash dump, keep this simple for + * now. + */ + if (cpu_has_apic || apic_from_smp_config()) + disconnect_bsp_APIC(0); +} + +static void __init irq_remapping_modify_x86_ops(void) +{ + x86_io_apic_ops.disable = irq_remapping_disable_io_apic; +} + static __init int setup_nointremap(char *str) { disable_irq_remap = 1; @@ -74,10 +96,17 @@ int __init irq_remapping_prepare(void) int __init irq_remapping_enable(void) { + int ret; + if (!remap_ops || !remap_ops->enable) return -ENODEV; - return remap_ops->enable(); + ret = remap_ops->enable(); + + if (irq_remapping_enabled) + irq_remapping_modify_x86_ops(); + + return ret; } void irq_remapping_disable(void) -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
