On Tue, Aug 21, 2012 at 2:45 PM, Felipe Balbi <ba...@ti.com> wrote: > Hi guys, > > here's a series of cleanup patches to the OMAP serial > driver. A later series could be made re-implementing > DMA using the DMA Engine API. Note that for RX DMA > we could be using RX Timeout IRQ as a hint that we better > use PIO instead ;-) > > All patches were tested on my pandaboard, but I'd really > like to receive Tested-by on other platforms. > > After this goes in, I'll probably try to get UART wakeup > working again and only after that look at DMA. > > cheers > > Felipe Balbi (13): > serial: omap: define and use to_uart_omap_port() > serial: omap: always return IRQ_HANDLED > serial: omap: define helpers for pdata function pointers > serial: omap: don't access the platform_device > serial: omap: drop DMA support > serial: add OMAP-specific defines > serial: omap: simplify IRQ handling > serial: omap: refactor receive_chars() into rdi/rlsi handlers > serial: omap: move THRE check to transmit_chars() > serial: omap: stick to put_autosuspend > serial: omap: set dev->drvdata before enabling pm_runtime > serial: omap: drop unnecessary check from remove > serial: omap: make sure to suspend device before remove > Apart from that one question on last patch, rest of the clean-up is really good. Nice work.
FWIW, Acked-by: Santosh Shilimkar <santosh.shilim...@ti.com> -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
