Looks like in pci-quirks.c, we enter the do() while() loop, reach the end
of extended capabilities and goto hc_init: label, skipping the switch.
Probably moving the switch under the hc_init label might work? Currently
we switch unconditionally on resume, so we could do the same at powerup as
well.
On Tue, 21 Aug 2012, Andiry Xu wrote:
On Tue, Aug 21, 2012 at 12:06 PM, <manoj.i...@canonical.com> wrote:
From: Manoj Iyer <manoj.i...@canonical.com>
USB 3.0 devices show up as high-speed devices on powerup, after an
s3 cycle they are correctly recognized as SuperSpeed. At powerup
unconditionally switch the port to xHCI like we do when we resume
from suspend.
BugLink: http://bugs.launchpad.net/bugs/1000424
Signed-off-by: Manoj Iyer <manoj.i...@canonical.com>
---
drivers/usb/host/xhci-pci.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 9bfd4ca11..5c8dbea 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -48,6 +48,14 @@ static int xhci_pci_reinit(struct xhci_hcd *xhci, struct
pci_dev *pdev)
if (!pci_set_mwi(pdev))
xhci_dbg(xhci, "MWI active\n");
+ /*
+ * USB SuperSpeed ports are recognized as HighSpeed ports on powerup
+ * unconditionally switch the ports to xHCI like we do when resume
+ * from suspend.
+ */
+ if (usb_is_intel_switchable_xhci(pdev))
+ usb_enable_xhci_ports(pdev);
+
Strange. This should have been called during system power up, in
quirk_usb_handoff_xhci() of pci_quirks.c. Do you see that routine get
called during power up?
Thanks,
Andiry
xhci_dbg(xhci, "Finished xhci_pci_reinit\n");
return 0;
}
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
====================
Manoj Iyer
Ubuntu/Canonical
Hardware Enablement
====================
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
