On Thu, Aug 9, 2012 at 4:43 AM, Stephan Linz <[email protected]> wrote:
> Early exit from of_platform_reset_gpio_probe() if there
> was no GPIO reset line configured.
>
> Avoid kernel oops in gpio_system_reset():
>
> [   96.603690] Restarting system.
> [   96.606094] Machine restart...
> [   96.608810] Oops: kernel access of bad area, sig: 11
> [   96.613662]  Registers dump: mode=824C1D1C
> [   96.617858]  r1=C000BB0C, r2=00000000, r3=FFFFFEF8, r4=000015B4
> [   96.623736]  r5=C0276270, r6=00000001, r7=FFFFFFFF, r8=000015B4
> [   96.629597]  r9=000015B3, r10=000015B4, r11=00000000, r12=00000000
> [   96.635733]  r13=00000000, r14=0000000F, r15=C0002B04, r16=00000000
> [   96.641973]  r17=C011E1A0, r18=80000115, r19=00000010, r20=48184ED8
> [   96.648184]  r21=00000000, r22=FFFFFFEA, r23=00000001, r24=FEE1DEAD
> [   96.654396]  r25=00000054, r26=1000B1C8, r27=00000000, r28=00000000
> [   96.660622]  r29=00000000, r30=00000000, r31=C24A97E0, rPC=C011E1A0
> [   96.666849]  msr=000042A2, ear=0000004C, esr=00000872, fsr=362E3639
>
> Signed-off-by: Stephan Linz <[email protected]>

Tested-by: Peter Crosthwaite <[email protected]>

> ---
> v2 Remove additional printk message from machine_restart()
> ---
>  arch/microblaze/kernel/reset.c |    6 +++++-
>  1 files changed, 5 insertions(+), 1 deletions(-)
>
> diff --git a/arch/microblaze/kernel/reset.c b/arch/microblaze/kernel/reset.c
> index 8d663d9..c021123 100644
> --- a/arch/microblaze/kernel/reset.c
> +++ b/arch/microblaze/kernel/reset.c
> @@ -28,6 +28,7 @@ void of_platform_reset_gpio_probe(void)
>         if (!gpio_is_valid(handle)) {
>                 printk(KERN_INFO "Skipping unavailable RESET gpio %d (%s)\n",
>                                 handle, "reset");
> +               return;
>         }
>
>         ret = gpio_request(handle, "reset");
> @@ -60,7 +61,10 @@ err:
>
>  static void gpio_system_reset(void)
>  {
> -       gpio_set_value(handle, 1 - reset_val);
> +       if (gpio_is_valid(handle))
> +               gpio_set_value(handle, 1 - reset_val);
> +       else
> +               printk(KERN_NOTICE "Reset GPIO unavailable - halting!\n");
>  }
>  #else
>  static void gpio_system_reset(void)
> --
> 1.7.0.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to