Hi All,
A few nitpicks.
> + * LIS3331DLH spec says 1LSBs corresponds 4G/1024 -> 1LSB is 1000/1024 mG.
> + * Sensitivity values for +/-2G, outdata in 12 bits for +/-2G scale. so 4
> + * bits adjustment is required
Shouldn't it be "1LSB is 4000/1024 mG" ?
Also "outdata in 12bits" (typo. in->is?)
On a more technical note, now that LIS3331DLH has 16bit resolution,
why don't we simply return the entire 16-bit value in
lis3lv02d_read_16(). The fact that lis3lv02d_read_16() has 16-bit
resolution can be indicated by
@@ -954,6 +984,16 @@ int lis3lv02d_init_device(struct lis3lv02d *lis3)
lis3->odr_mask = CTRL1_ODR0|CTRL1_ODR1|CTRL1_ODR2|CTRL1_ODR3;
lis3->scale = LIS3_SENSITIVITY_8B;
break;
+ case WAI_3DLH:
+ pr_info("16 bits 3DLH sensor found\n");
+ lis3->read_data = lis3lv02d_read_16;
+ lis3->mdps_max_val = 32768; /* 16 bits for +/-2G */
--
regards
CVS
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
