Declare an array of platform_device_id, instead of registering a driver
for each supported chip. This makes the code cleaner.
Also add a module description.

Signed-off-by: Vivien Didelot <vivien.dide...@savoirfairelinux.com>
---
 drivers/hwmon/sht15.c | 94 +++++++++++++--------------------------------------
 1 file changed, 23 insertions(+), 71 deletions(-)

diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c
index 8b011d0..38e0233 100644
--- a/drivers/hwmon/sht15.c
+++ b/drivers/hwmon/sht15.c
@@ -1,7 +1,7 @@
 /*
  * sht15.c - support for the SHT15 Temperature and Humidity Sensor
  *
- * Portions Copyright (c) 2010-2011 Savoir-faire Linux Inc.
+ * Portions Copyright (c) 2010-2012 Savoir-faire Linux Inc.
  *          Jerome Oufella <jerome.oufe...@savoirfairelinux.com>
  *          Vivien Didelot <vivien.dide...@savoirfairelinux.com>
  *
@@ -53,6 +53,9 @@
 #define SHT15_STATUS_HEATER            0x04
 #define SHT15_STATUS_LOW_BATTERY       0x40
 
+/* List of supported chips */
+enum sht15_chips { sht10, sht11, sht15, sht71, sht75 };
+
 /* Actions the driver may be doing */
 enum sht15_state {
        SHT15_READING_NOTHING,
@@ -1042,77 +1045,26 @@ static int __devexit sht15_remove(struct 
platform_device *pdev)
        return 0;
 }
 
-/*
- * sht_drivers simultaneously refers to __devinit and __devexit function
- * which causes spurious section mismatch warning. So use __refdata to
- * get rid from this.
- */
-static struct platform_driver __refdata sht_drivers[] = {
-       {
-               .driver = {
-                       .name = "sht10",
-                       .owner = THIS_MODULE,
-               },
-               .probe = sht15_probe,
-               .remove = __devexit_p(sht15_remove),
-       }, {
-               .driver = {
-                       .name = "sht11",
-                       .owner = THIS_MODULE,
-               },
-               .probe = sht15_probe,
-               .remove = __devexit_p(sht15_remove),
-       }, {
-               .driver = {
-                       .name = "sht15",
-                       .owner = THIS_MODULE,
-               },
-               .probe = sht15_probe,
-               .remove = __devexit_p(sht15_remove),
-       }, {
-               .driver = {
-                       .name = "sht71",
-                       .owner = THIS_MODULE,
-               },
-               .probe = sht15_probe,
-               .remove = __devexit_p(sht15_remove),
-       }, {
-               .driver = {
-                       .name = "sht75",
-                       .owner = THIS_MODULE,
-               },
-               .probe = sht15_probe,
-               .remove = __devexit_p(sht15_remove),
-       },
+static struct platform_device_id sht15_device_ids[] = {
+       { "sht10", sht10 },
+       { "sht11", sht11 },
+       { "sht15", sht15 },
+       { "sht71", sht71 },
+       { "sht75", sht75 },
+       { }
 };
+MODULE_DEVICE_TABLE(platform, sht15_device_ids);
 
-static int __init sht15_init(void)
-{
-       int ret;
-       int i;
-
-       for (i = 0; i < ARRAY_SIZE(sht_drivers); i++) {
-               ret = platform_driver_register(&sht_drivers[i]);
-               if (ret)
-                       goto error_unreg;
-       }
-
-       return 0;
-
-error_unreg:
-       while (--i >= 0)
-               platform_driver_unregister(&sht_drivers[i]);
-
-       return ret;
-}
-module_init(sht15_init);
-
-static void __exit sht15_exit(void)
-{
-       int i;
-       for (i = ARRAY_SIZE(sht_drivers) - 1; i >= 0; i--)
-               platform_driver_unregister(&sht_drivers[i]);
-}
-module_exit(sht15_exit);
+static struct platform_driver sht15_driver = {
+       .driver = {
+               .name = "sht15",
+               .owner = THIS_MODULE,
+       },
+       .probe = sht15_probe,
+       .remove = __devexit_p(sht15_remove),
+       .id_table = sht15_device_ids,
+};
+module_platform_driver(sht15_driver);
 
 MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Sensirion SHT15 temperature and humidity sensor driver");
-- 
1.7.11.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to