Adds support for the defined EDMA, generic DMA controller, and
DMA request bindings for mmc and spi.

Signed-off-by: Matt Porter <mpor...@ti.com>
---
 arch/arm/boot/dts/am33xx.dtsi |   46 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index e8033eb..c14a61d 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -86,6 +86,36 @@
                        reg = <0x48200000 0x1000>;
                };
 
+               edma: edma@49000000 {
+                       compatible = "ti,edma3";
+                       ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
+                       reg = <0x49000000 0x10000>;
+                       interrupt-parent = <&intc>;
+                       interrupts = <12 13 14>;
+                       #dma-cells = <1>;
+                       dma-channels = <64>;
+                       ti,edma-regions = <4>;
+                       ti,edma-slots = <256>;
+                       ti,edma-reserved-channels = <0  2
+                                            14 2
+                                            26 6
+                                            48 4
+                                            56 8>;
+                       ti,edma-reserved-slots = <0  2
+                                         14 2
+                                         26 6
+                                         48 4
+                                         56 8
+                                         64 127>;
+                       ti,edma-queue-tc-map = <0 0
+                                       1 1
+                                       2 2>;
+                       ti,edma-queue-priority-map = <0 0
+                                             1 1
+                                             2 2>;
+                       ti,edma-default-queue = <0>;
+               };
+
                gpio0: gpio@44e07000 {
                        compatible = "ti,omap4-gpio";
                        ti,hwmods = "gpio1";
@@ -290,6 +320,9 @@
                        ti,hwmods = "mmc1";
                        ti,dual-volt;
                        ti,needs-special-reset;
+                       dmas = <&edma 24
+                               &edma 25>;
+                       dma-names = "tx", "rx";
                };
 
                mmc2: mmc@481D8000 {
@@ -297,6 +330,9 @@
                        ti,hwmods = "mmc2";
                        ti,needs-special-reset;
                        status = "disabled";
+                       dmas = <&edma 2
+                               &edma 3>;
+                       dma-names = "tx", "rx";
                };
 
                mmc3: mmc@47810000 {
@@ -339,6 +375,11 @@
                        reg = <0x48030000 0x400>;
                        interrupt-parent = <&intc>;
                        interrupt = <65>;
+                       dmas = <&edma 16
+                               &edma 17
+                               &edma 18
+                               &edma 19>;
+                       dma-names = "tx0", "rx0", "tx1", "rx1";
                        ti,spi-num-cs = <2>;
                        ti,hwmods = "spi0";
                        status = "disabled";
@@ -351,6 +392,11 @@
                        reg = <0x481a0000 0x400>;
                        interrupt-parent = <&intc>;
                        interrupt = <125>;
+                       dmas = <&edma 42
+                               &edma 43
+                               &edma 44
+                               &edma 45>;
+                       dma-names = "tx0", "rx0", "tx1", "rx1";
                        ti,spi-num-cs = <2>;
                        ti,hwmods = "spi1";
                        status = "disabled";
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to