TIAO/DIYGADGET USB Multi-Protocol Adapter (TUMPA) is an FTDI FT2232H based device which provides an easily accessible JTAG, SPI, I2C, serial breakout.
http://www.diygadget.com/tiao-usb-multi-protocol-adapter-jtag-spi-i2c-serial.html http://www.tiaowiki.com/w/TIAO_USB_Multi_Protocol_Adapter_User%27s_Manual FTDI FT2232H provides two serial channels (A and B), but on the TUMPA channel A is dedicated to JTAG/SPI while channel B can be used for UART/RS-232: use the ftdi_jtag_quirk to expose only channel B as a usb-serial interface to userspace. Signed-off-by: Antonio Ospite <osp...@studenti.unina.it> --- drivers/usb/serial/ftdi_sio_ids.h | 5 +++++ drivers/usb/serial/ftdi_sio.c | 2 ++ 2 files changed, 7 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 5dd96ca..2d6e641 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -514,6 +514,11 @@ */ #define FTDI_TAVIR_STK500_PID 0xFA33 /* STK500 AVR programmer */ +/* + * TIAO product ids (FTDI_VID) + * http://www.tiaowiki.com/w/Main_Page + */ +#define FTDI_TIAO_UMPA_PID 0x8a98 /* TIAO/DIYGADGET USB Multi-Protocol Adapter */ /********************************/ diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 5620db6..d1ef169 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -584,6 +584,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) }, { USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) }, { USB_DEVICE(FTDI_VID, FTDI_TAVIR_STK500_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_TIAO_UMPA_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, /* * ELV devices: */ -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
