On Mon September 24 2012 13:50:00 Hans Verkuil wrote:
> On Mon September 24 2012 12:59:11 Hans Verkuil wrote:
> > On Mon September 24 2012 12:44:11 Prabhakar wrote:
> > > From: Lad, Prabhakar <prabhakar....@ti.com>
> > >
> > > vpif_display relied on a 1-1 mapping of output and subdev. This is not
> > > necessarily the case. Separate the two. So there is a list of subdevs
> > > and a list of outputs. Each output refers to a subdev and has routing
> > > information. An output does not have to have a subdev.
> > >
> > > The initial output for each channel is set to the fist output.
> > >
> > > Currently missing is support for associating multiple subdevs with
> > > an output.
> > >
> > > Signed-off-by: Lad, Prabhakar <prabhakar....@ti.com>
> > > Signed-off-by: Manjunath Hadli <manjunath.ha...@ti.com>
> > > Cc: Hans Verkuil <hans.verk...@cisco.com>
> > > Cc: Sekhar Nori <nsek...@ti.com>
> >
> > Acked-by: Hans Verkuil <hans.verk...@cisco.com>
>
> I'm retracting this Ack. I did see something that wasn't right but I thought
> it was harmless, but after thinking some more I believe it should be fixed.
> Luckily, it's easy to fix. See below. Since we need a new version anyway I
> also added a comment to a few minor issues that can be fixed at the same time.
>
> >
> > Regards,
> >
> > Hans
> >
> > > ---
> > > This patch is dependent on the patch series from Hans
> > > (http://www.mail-archive.com/linux-media@vger.kernel.org/msg52270.html)
> > >
> > > Changes for V2:
> > > 1: Changed v4l2_device_call_until_err() call to v4l2_subdev_call() for
> > > s_routing, since this call is for specific subdev, pointed out by
> > > Hans.
> > >
> > > arch/arm/mach-davinci/board-da850-evm.c | 29 +++++-
> > > arch/arm/mach-davinci/board-dm646x-evm.c | 39 ++++++-
> > > drivers/media/platform/davinci/vpif_display.c | 136
> > > ++++++++++++++++++++-----
> > > include/media/davinci/vpif_types.h | 20 +++-
> > > 4 files changed, 183 insertions(+), 41 deletions(-)
> > >
> > > diff --git a/arch/arm/mach-davinci/board-da850-evm.c
> > > b/arch/arm/mach-davinci/board-da850-evm.c
> > > index 3081ea4..23a7012 100644
> > > --- a/arch/arm/mach-davinci/board-da850-evm.c
> > > +++ b/arch/arm/mach-davinci/board-da850-evm.c
> > > @@ -46,6 +46,7 @@
> > > #include <mach/spi.h>
> > >
> > > #include <media/tvp514x.h>
> > > +#include <media/adv7343.h>
> > >
> > > #define DA850_EVM_PHY_ID "davinci_mdio-0:00"
> > > #define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8)
> > > @@ -1257,16 +1258,34 @@ static struct vpif_subdev_info
> > > da850_vpif_subdev[] = {
> > > },
> > > };
> > >
> > > -static const char const *vpif_output[] = {
> > > - "Composite",
> > > - "S-Video",
> > > +static const struct vpif_output da850_ch0_outputs[] = {
> > > + {
> > > + .output = {
> > > + .index = 0,
> > > + .name = "Composite",
> > > + .type = V4L2_OUTPUT_TYPE_ANALOG,
> > > + },
> > > + .subdev_name = "adv7343",
> > > + .output_route = ADV7343_COMPOSITE_ID,
> > > + },
> > > + {
> > > + .output = {
> > > + .index = 1,
> > > + .name = "S-Video",
> > > + .type = V4L2_OUTPUT_TYPE_ANALOG,
> > > + },
> > > + .subdev_name = "adv7343",
> > > + .output_route = ADV7343_SVIDEO_ID,
> > > + },
> > > };
> > >
> > > static struct vpif_display_config da850_vpif_display_config = {
> > > .subdevinfo = da850_vpif_subdev,
> > > .subdev_count = ARRAY_SIZE(da850_vpif_subdev),
> > > - .output = vpif_output,
> > > - .output_count = ARRAY_SIZE(vpif_output),
> > > + .chan_config[0] = {
> > > + .outputs = da850_ch0_outputs,
> > > + .output_count = ARRAY_SIZE(da850_ch0_outputs),
> > > + },
> > > .card_name = "DA850/OMAP-L138 Video Display",
> > > };
> > >
> > > diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c
> > > b/arch/arm/mach-davinci/board-dm646x-evm.c
> > > index ad249c7..c206768 100644
> > > --- a/arch/arm/mach-davinci/board-dm646x-evm.c
> > > +++ b/arch/arm/mach-davinci/board-dm646x-evm.c
> > > @@ -26,6 +26,7 @@
> > > #include <linux/i2c/pcf857x.h>
> > >
> > > #include <media/tvp514x.h>
> > > +#include <media/adv7343.h>
> > >
> > > #include <linux/mtd/mtd.h>
> > > #include <linux/mtd/nand.h>
> > > @@ -496,18 +497,44 @@ static struct vpif_subdev_info dm646x_vpif_subdev[]
> > > = {
> > > },
> > > };
> > >
> > > -static const char *output[] = {
> > > - "Composite",
> > > - "Component",
> > > - "S-Video",
> > > +static const struct vpif_output dm6467_ch0_outputs[] = {
> > > + {
> > > + .output = {
> > > + .index = 0,
> > > + .name = "Composite",
> > > + .type = V4L2_OUTPUT_TYPE_ANALOG,
> > > + },
> > > + .subdev_name = "adv7343",
> > > + .output_route = ADV7343_COMPOSITE_ID,
> > > + },
> > > + {
> > > + .output = {
> > > + .index = 1,
> > > + .name = "Component",
> > > + .type = V4L2_OUTPUT_TYPE_ANALOG,
> > > + },
> > > + .subdev_name = "adv7343",
> > > + .output_route = ADV7343_COMPONENT_ID,
> > > + },
> > > + {
> > > + .output = {
> > > + .index = 2,
> > > + .name = "S-Video",
> > > + .type = V4L2_OUTPUT_TYPE_ANALOG,
> > > + },
> > > + .subdev_name = "adv7343",
> > > + .output_route = ADV7343_SVIDEO_ID,
> > > + },
> > > };
Oops, and another thing: for both struct v4l2_input and struct v4l2_output
you should also fill in the capabilities field in the board files.
This should be either V4L2_IN_CAP_STD (SDTV) or V4L2_IN_CAP_CUSTOM_TIMINGS
(HDTV) for input and the V4L2_OUT_ variants for v4l2_output.
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
