On Tue, Sep 25, 2012 at 10:34:13AM +0300, Tero Keski-Valkama wrote: > This patch is a patch to add support for Acer Aspire 5755G fan control > to acerhdf module for the latest BIOS version available in the Acer > web site, V1.20. > > <DSDT disassembly dump> > ... > Offset (0xA7), > OSTT, 8, > OSST, 8, > THLT, 8, > TCNL, 8, > MODE, 1, > , 2, > INIT, 1, > FAN1, 1, > FAN2, 1, > FANT, 1, > SKNM, 1, > SDTM, 8, > FSSN, 4, > FANU, 4, > ... > </DSDT disassembly dump> > > By experiment it was found that setting the register address 0xAB to > 0x00 (FAN1 -> 0) caused the fan to stop, and setting it to the > original value of 0x08 (FAN1 -> 1) caused the fan to operate > automatically in BIOS control. > > By observation the value in the Embedded Controller table which > correlated best with the temperature, and changes up and down along > with real temperature was the register address 0xB4 (SKTC). > > This patch and related evidence and dumps were sent to the original > authors of the module, peter and bp. > > The original author of the patch: Tero Keski-Valkama
No need for that - the Signed-off-by and patch authorship annotation in git says that already. > > Signed-off-by: Tero Keski-Valkama <tero.keski-valk...@neter.fi> But before we go with this any further: you mentioned some issues still with acerhdf - you don't want to turn off your fan but to turn it to full? I think in this case, you want to simply not load the driver and use the BIOS settings, no? -- Regards/Gruss, Boris. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/