Linus,
Please apply this patch to your latest Linux-2.4.2 source. Changes:
o ALi M5123 FIR (4Mbps IrDA) Controller support [new feature]
-- Dag
diff -urpN linux-2.4.2/Documentation/Configure.help
linux-2.4.2-irda-patch/Documentation/Configure.help
--- linux-2.4.2/Documentation/Configure.help Tue Feb 27 09:16:15 2001
+++ linux-2.4.2-irda-patch/Documentation/Configure.help Tue Feb 27 09:16:01 2001
@@ -16897,6 +16897,16 @@ CONFIG_SMC_IRCC_FIR
here and read Documentation/modules.txt. The module will be called
smc-ircc.o.
+ALi M5123 FIR Controller Driver
+CONFIG_ALI_FIR
+ Say Y here if you want to build support for the ALi M5123 FIR
+ Controller. The ALi M5123 FIR Controller is embedded in ALi
+ M1543C, M1535, M1535D, M1535+, M1535D Sourth Bridge. This
+ driver supports SIR, MIR and FIR (4Mbps) speeds.
+
+ If you want to compile it as a module, say M here and read
+ Documentation/modules.txt. The module will be called ali-ircc.o.
+
Serial dongle support
CONFIG_DONGLE
Say Y here if you have an infrared device that connects to your
diff -urpN linux-2.4.2/drivers/net/irda/Config.in
linux-2.4.2-irda-patch/drivers/net/irda/Config.in
--- linux-2.4.2/drivers/net/irda/Config.in Tue Feb 27 09:16:15 2001
+++ linux-2.4.2-irda-patch/drivers/net/irda/Config.in Tue Feb 27 09:16:01 2001
@@ -23,6 +23,7 @@ dep_tristate 'Winbond W83977AF (IR)' CON
dep_tristate 'Toshiba Type-O IR Port' CONFIG_TOSHIBA_FIR $CONFIG_IRDA
if [ "$CONFIG_EXPERIMENTAL" != "n" ]; then
dep_tristate 'SMC IrCC (Experimental)' CONFIG_SMC_IRCC_FIR $CONFIG_IRDA
+dep_tristate 'ALi M5123 FIR (Experimental)' CONFIG_ALI_FIR $CONFIG_IRDA
fi
endmenu
diff -urpN linux-2.4.2/drivers/net/irda/Makefile
linux-2.4.2-irda-patch/drivers/net/irda/Makefile
--- linux-2.4.2/drivers/net/irda/Makefile Tue Feb 27 09:16:15 2001
+++ linux-2.4.2-irda-patch/drivers/net/irda/Makefile Tue Feb 27 09:16:01 2001
@@ -17,6 +17,7 @@ obj-$(CONFIG_NSC_FIR) += nsc-ircc.o
obj-$(CONFIG_WINBOND_FIR) += w83977af_ir.o
obj-$(CONFIG_TOSHIBA_FIR) += toshoboe.o
obj-$(CONFIG_SMC_IRCC_FIR) += smc-ircc.o irport.o
+obj-$(CONFIG_ALI_FIR) += ali-ircc.o
obj-$(CONFIG_ESI_DONGLE) += esi.o
obj-$(CONFIG_TEKRAM_DONGLE) += tekram.o
obj-$(CONFIG_ACTISYS_DONGLE) += actisys.o
diff -urpN linux-2.4.2/drivers/net/irda/ali-ircc.c
linux-2.4.2-irda-patch/drivers/net/irda/ali-ircc.c
--- linux-2.4.2/drivers/net/irda/ali-ircc.c Thu Jan 1 01:00:00 1970
+++ linux-2.4.2-irda-patch/drivers/net/irda/ali-ircc.c Tue Feb 27 09:16:01 2001
@@ -0,0 +1,2306 @@
+/*********************************************************************
+ *
+ * Filename: ali-ircc.h
+ * Version: 0.5
+ * Description: Driver for the ALI M1535D and M1543C FIR Controller
+ * Status: Experimental.
+ * Author: Benjamin Kong <[EMAIL PROTECTED]>
+ * Created at: 2000/10/16 03:46PM
+ * Modified at: 2001/1/3 02:55PM
+ * Modified by: Benjamin Kong <[EMAIL PROTECTED]>
+ *
+ * Copyright (c) 2000 Benjamin Kong <[EMAIL PROTECTED]>
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ ********************************************************************/
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/malloc.h>
+#include <linux/init.h>
+#include <linux/rtnetlink.h>
+#include <linux/serial_reg.h>
+
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/byteorder.h>
+
+#include <linux/pm.h>
+
+#include <net/irda/wrapper.h>
+#include <net/irda/irda.h>
+#include <net/irda/irmod.h>
+#include <net/irda/irlap_frame.h>
+#include <net/irda/irda_device.h>
+
+#include <net/irda/ali-ircc.h>
+
+#define CHIP_IO_EXTENT 8
+#define BROKEN_DONGLE_ID
+
+static char *driver_name = "ali-ircc";
+
+/* Module parameters */
+static int qos_mtt_bits = 0x07; /* 1 ms or more */
+
+/* Use BIOS settions by default, but user may supply module parameters */
+static unsigned int io[] = { ~0, ~0, ~0, ~0 };
+static unsigned int irq[] = { 0, 0, 0, 0 };
+static unsigned int dma[] = { 0, 0, 0, 0 };
+
+static int ali_ircc_probe_43(ali_chip_t *chip, chipio_t *info);
+static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info);
+static int ali_ircc_init_43(ali_chip_t *chip, chipio_t *info);
+static int ali_ircc_init_53(ali_chip_t *chip, chipio_t *info);
+
+/* These are the currently known ALi sourth-bridge chipsets, the only one difference
+ * is that M1543C doesn't support HP HDSL-3600
+ */
+static ali_chip_t chips[] =
+{
+ { "M1543", { 0x3f0, 0x370 }, 0x51, 0x23, 0x20, 0x43, ali_ircc_probe_53,
+ali_ircc_init_43 },
+ { "M1535", { 0x3f0, 0x370 }, 0x51, 0x23, 0x20, 0x53, ali_ircc_probe_53,
+ali_ircc_init_53 },
+ { NULL }
+};
+
+/* Max 4 instances for now */
+static struct ali_ircc_cb *dev_self[] = { NULL, NULL, NULL, NULL };
+
+/* Dongle Types */
+static char *dongle_types[] = {
+ "TFDS6000",
+ "HP HSDL-3600",
+ "HP HSDL-1100",
+ "No dongle connected",
+};
+
+/* Some prototypes */
+static int ali_ircc_open(int i, chipio_t *info);
+
+#ifdef MODULE
+static int ali_ircc_close(struct ali_ircc_cb *self);
+#endif /* MODULE */
+
+static int ali_ircc_setup(chipio_t *info);
+static int ali_ircc_is_receiving(struct ali_ircc_cb *self);
+static int ali_ircc_net_init(struct net_device *dev);
+static int ali_ircc_net_open(struct net_device *dev);
+static int ali_ircc_net_close(struct net_device *dev);
+static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static int ali_ircc_pmproc(struct pm_dev *dev, pm_request_t rqst, void *data);
+static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud);
+static void ali_ircc_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static void ali_ircc_suspend(struct ali_ircc_cb *self);
+static void ali_ircc_wakeup(struct ali_ircc_cb *self);
+static struct net_device_stats *ali_ircc_net_get_stats(struct net_device *dev);
+
+/* SIR function */
+static int ali_ircc_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev);
+static void ali_ircc_sir_interrupt(int irq, struct ali_ircc_cb *self, struct pt_regs
+*regs);
+static void ali_ircc_sir_receive(struct ali_ircc_cb *self);
+static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self);
+static int ali_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len);
+static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed);
+
+/* FIR function */
+static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev);
+static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 speed);
+static void ali_ircc_fir_interrupt(int irq, struct ali_ircc_cb *self, struct pt_regs
+*regs);
+static int ali_ircc_dma_receive(struct ali_ircc_cb *self);
+static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self);
+static int ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self);
+static void ali_ircc_dma_xmit(struct ali_ircc_cb *self);
+
+/* My Function */
+static int ali_ircc_read_dongle_id (int i, chipio_t *info);
+static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed);
+
+/* ALi chip function */
+static void SIR2FIR(int iobase);
+static void FIR2SIR(int iobase);
+static void SetCOMInterrupts(struct ali_ircc_cb *self , unsigned char enable);
+
+/*
+ * Function ali_ircc_init ()
+ *
+ * Initialize chip. Find out whay kinds of chips we are dealing with
+ * and their configuation registers address
+ */
+int __init ali_ircc_init(void)
+{
+ ali_chip_t *chip;
+ chipio_t info;
+ int ret = -ENODEV;
+ int cfg, cfg_base;
+ int reg, revision;
+ int i = 0;
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ---------------- Start ----------------\n");
+
+ /* Probe for all the ALi chipsets we know about */
+ for (chip= chips; chip->name; chip++, i++)
+ {
+ IRDA_DEBUG(2, __FUNCTION__"(), Probing for %s ...\n", chip->name);
+
+ /* Try all config registers for this chip */
+ for (cfg=0; cfg<2; cfg++)
+ {
+ cfg_base = chip->cfg[cfg];
+ if (!cfg_base)
+ continue;
+
+ memset(&info, 0, sizeof(chipio_t));
+ info.cfg_base = cfg_base;
+ info.fir_base = io[i];
+ info.dma = dma[i];
+ info.irq = irq[i];
+
+
+ /* Enter Configuration */
+ outb(chip->entr1, cfg_base);
+ outb(chip->entr2, cfg_base);
+
+ /* Select Logical Device 5 Registers (UART2) */
+ outb(0x07, cfg_base);
+ outb(0x05, cfg_base+1);
+
+ /* Read Chip Identification Register */
+ outb(chip->cid_index, cfg_base);
+ reg = inb(cfg_base+1);
+
+ if (reg == chip->cid_value)
+ {
+ IRDA_DEBUG(2, __FUNCTION__
+ "(), Chip found at 0x%03x\n", cfg_base);
+
+ outb(0x1F, cfg_base);
+ revision = inb(cfg_base+1);
+ IRDA_DEBUG(2, __FUNCTION__
+ "(), Found %s chip, revision=%d\n",
+ chip->name, revision);
+
+
+ /*
+ * If the user supplies the base address, then
+ * we init the chip, if not we probe the values
+ * set by the BIOS
+ */
+ if (io[i] < 2000)
+ {
+ chip->init(chip, &info);
+ }
+ else
+ {
+ chip->probe(chip, &info);
+ }
+
+ if (ali_ircc_open(i, &info) == 0)
+ ret = 0;
+ i++;
+ }
+ else
+ {
+ IRDA_DEBUG(2, __FUNCTION__
+ "(), No %s chip at 0x%03x\n", chip->name,
+cfg_base);
+ }
+ /* Exit configuration */
+ outb(0xbb, cfg_base);
+ }
+ }
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ----------------- End -----------------\n");
+
+ return ret;
+}
+
+/*
+ * Function ali_ircc_cleanup ()
+ *
+ * Close all configured chips
+ *
+ */
+#ifdef MODULE
+static void ali_ircc_cleanup(void)
+{
+ int i;
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ---------------- Start ----------------\n");
+
+
+ pm_unregister_all(ali_ircc_pmproc);
+
+ for (i=0; i < 4; i++) {
+ if (dev_self[i])
+ ali_ircc_close(dev_self[i]);
+ }
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ----------------- End -----------------\n");
+}
+#endif /* MODULE */
+
+/*
+ * Function ali_ircc_open (int i, chipio_t *inf)
+ *
+ * Open driver instance
+ *
+ */
+static int ali_ircc_open(int i, chipio_t *info)
+{
+ struct net_device *dev;
+ struct ali_ircc_cb *self;
+ struct pm_dev *pmdev;
+ int dongle_id;
+ int ret;
+ int err;
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ---------------- Start ----------------\n");
+
+
+ /* Set FIR FIFO and DMA Threshold */
+ if ((ali_ircc_setup(info)) == -1)
+ return -1;
+
+ /* Allocate new instance of the driver */
+ self = kmalloc(sizeof(struct ali_ircc_cb), GFP_KERNEL);
+ if (self == NULL)
+ {
+ ERROR(__FUNCTION__ "(), can't allocate memory for control block!\n");
+ return -ENOMEM;
+ }
+ memset(self, 0, sizeof(struct ali_ircc_cb));
+ spin_lock_init(&self->lock);
+
+ /* Need to store self somewhere */
+ dev_self[i] = self;
+ self->index = i;
+
+ /* Initialize IO */
+ self->io.cfg_base = info->cfg_base; /* In ali_ircc_probe_53 assign
+ */
+ self->io.fir_base = info->fir_base; /* info->sir_base = info->fir_base
+ */
+ self->io.sir_base = info->sir_base; /* ALi SIR and FIR use the same
+address */
+ self->io.irq = info->irq;
+ self->io.fir_ext = CHIP_IO_EXTENT;
+ self->io.dma = info->dma;
+ self->io.fifo_size = 16; /* SIR: 16, FIR: 32 Benjamin 2000/11/1
+*/
+
+ /* Reserve the ioports that we need */
+ ret = check_region(self->io.fir_base, self->io.fir_ext);
+ if (ret < 0) {
+ WARNING(__FUNCTION__ "(), can't get iobase of 0x%03x\n",
+ self->io.fir_base);
+ dev_self[i] = NULL;
+ kfree(self);
+ return -ENODEV;
+ }
+ request_region(self->io.fir_base, self->io.fir_ext, driver_name);
+
+ /* Initialize QoS for this device */
+ irda_init_max_qos_capabilies(&self->qos);
+
+ /* The only value we must override it the baudrate */
+ self->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600|
+ IR_115200|IR_576000|IR_1152000|(IR_4000000 << 8); // benjamin
+2000/11/8 05:27PM
+
+ self->qos.min_turn_time.bits = qos_mtt_bits;
+
+ irda_qos_bits_to_value(&self->qos);
+
+ self->flags = IFF_FIR|IFF_MIR|IFF_SIR|IFF_DMA|IFF_PIO; // benjamin 2000/11/8
+05:27PM
+
+ /* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */
+ self->rx_buff.truesize = 14384;
+ self->tx_buff.truesize = 14384;
+
+ /* Allocate memory if needed */
+ self->rx_buff.head = (__u8 *) kmalloc(self->rx_buff.truesize,
+ GFP_KERNEL |GFP_DMA);
+ if (self->rx_buff.head == NULL)
+ {
+ kfree(self);
+ return -ENOMEM;
+ }
+ memset(self->rx_buff.head, 0, self->rx_buff.truesize);
+
+ self->tx_buff.head = (__u8 *) kmalloc(self->tx_buff.truesize,
+ GFP_KERNEL|GFP_DMA);
+ if (self->tx_buff.head == NULL) {
+ kfree(self);
+ kfree(self->rx_buff.head);
+ return -ENOMEM;
+ }
+ memset(self->tx_buff.head, 0, self->tx_buff.truesize);
+
+ self->rx_buff.in_frame = FALSE;
+ self->rx_buff.state = OUTSIDE_FRAME;
+ self->tx_buff.data = self->tx_buff.head;
+ self->rx_buff.data = self->rx_buff.head;
+
+ /* Reset Tx queue info */
+ self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
+ self->tx_fifo.tail = self->tx_buff.head;
+
+ if (!(dev = dev_alloc("irda%d", &err))) {
+ ERROR(__FUNCTION__ "(), dev_alloc() failed!\n");
+ return -ENOMEM;
+ }
+
+ dev->priv = (void *) self;
+ self->netdev = dev;
+
+ /* Override the network functions we need to use */
+ dev->init = ali_ircc_net_init;
+ dev->hard_start_xmit = ali_ircc_sir_hard_xmit;
+ dev->open = ali_ircc_net_open;
+ dev->stop = ali_ircc_net_close;
+ dev->do_ioctl = ali_ircc_net_ioctl;
+ dev->get_stats = ali_ircc_net_get_stats;
+
+ rtnl_lock();
+ err = register_netdevice(dev);
+ rtnl_unlock();
+ if (err) {
+ ERROR(__FUNCTION__ "(), register_netdev() failed!\n");
+ return -1;
+ }
+ MESSAGE("IrDA: Registered device %s\n", dev->name);
+
+ /* Check dongle id */
+ dongle_id = ali_ircc_read_dongle_id(i, info);
+ MESSAGE(__FUNCTION__ "(), %s, Found dongle: %s\n", driver_name,
+dongle_types[dongle_id]);
+
+ self->io.dongle_id = dongle_id;
+
+ pmdev = pm_register(PM_SYS_DEV, PM_SYS_IRDA, ali_ircc_pmproc);
+ if (pmdev)
+ pmdev->data = self;
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ----------------- End -----------------\n");
+
+ return 0;
+}
+
+
+#ifdef MODULE
+/*
+ * Function ali_ircc_close (self)
+ *
+ * Close driver instance
+ *
+ */
+static int ali_ircc_close(struct ali_ircc_cb *self)
+{
+ int iobase;
+
+ IRDA_DEBUG(4, __FUNCTION__ "(), ---------------- Start ----------------\n");
+
+ ASSERT(self != NULL, return -1;);
+
+ iobase = self->io.fir_base;
+
+ /* Remove netdevice */
+ if (self->netdev) {
+ rtnl_lock();
+ unregister_netdevice(self->netdev);
+ rtnl_unlock();
+ }
+
+ /* Release the PORT that this driver is using */
+ IRDA_DEBUG(4, __FUNCTION__ "(), Releasing Region %03x\n", self->io.fir_base);
+ release_region(self->io.fir_base, self->io.fir_ext);
+
+ if (self->tx_buff.head)
+ kfree(self->tx_buff.head);
+
+ if (self->rx_buff.head)
+ kfree(self->rx_buff.head);
+
+ dev_self[self->index] = NULL;
+ kfree(self);
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ----------------- End -----------------\n");
+
+ return 0;
+}
+#endif /* MODULE */
+
+/*
+ * Function ali_ircc_init_43 (chip, info)
+ *
+ * Initialize the ALi M1543 chip.
+ */
+static int ali_ircc_init_43(ali_chip_t *chip, chipio_t *info)
+{
+ /* All controller information like I/O address, DMA channel, IRQ
+ * are set by BIOS
+ */
+
+ return 0;
+}
+
+/*
+ * Function ali_ircc_init_53 (chip, info)
+ *
+ * Initialize the ALi M1535 chip.
+ */
+static int ali_ircc_init_53(ali_chip_t *chip, chipio_t *info)
+{
+ /* All controller information like I/O address, DMA channel, IRQ
+ * are set by BIOS
+ */
+
+ return 0;
+}
+
+/*
+ * Function ali_ircc_probe_43 (chip, info)
+ *
+ * Probes for the ALi M1543
+ */
+static int ali_ircc_probe_43(ali_chip_t *chip, chipio_t *info)
+{
+ return 0;
+}
+
+/*
+ * Function ali_ircc_probe_53 (chip, info)
+ *
+ * Probes for the ALi M1535D or M1535
+ */
+static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info)
+{
+ int cfg_base = info->cfg_base;
+ int hi, low, reg;
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ---------------- Start ----------------\n");
+
+ /* Enter Configuration */
+ outb(chip->entr1, cfg_base);
+ outb(chip->entr2, cfg_base);
+
+ /* Select Logical Device 5 Registers (UART2) */
+ outb(0x07, cfg_base);
+ outb(0x05, cfg_base+1);
+
+ /* Read address control register */
+ outb(0x60, cfg_base);
+ hi = inb(cfg_base+1);
+ outb(0x61, cfg_base);
+ low = inb(cfg_base+1);
+ info->fir_base = (hi<<8) + low;
+
+ info->sir_base = info->fir_base;
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), probing fir_base=0x%03x\n", info->fir_base);
+
+ /* Read IRQ control register */
+ outb(0x70, cfg_base);
+ reg = inb(cfg_base+1);
+ info->irq = reg & 0x0f;
+ IRDA_DEBUG(2, __FUNCTION__ "(), probing irq=%d\n", info->irq);
+
+ /* Read DMA channel */
+ outb(0x74, cfg_base);
+ reg = inb(cfg_base+1);
+ info->dma = reg & 0x07;
+
+ if(info->dma == 0x04)
+ WARNING(__FUNCTION__ "(), No DMA channel assigned !\n");
+ else
+ IRDA_DEBUG(2, __FUNCTION__ "(), probing dma=%d\n", info->dma);
+
+ /* Read Enabled Status */
+ outb(0x30, cfg_base);
+ reg = inb(cfg_base+1);
+ info->enabled = (reg & 0x80) && (reg & 0x01);
+ IRDA_DEBUG(2, __FUNCTION__ "(), probing enabled=%d\n", info->enabled);
+
+ /* Read Power Status */
+ outb(0x22, cfg_base);
+ reg = inb(cfg_base+1);
+ info->suspended = (reg & 0x20);
+ IRDA_DEBUG(2, __FUNCTION__ "(), probing suspended=%d\n", info->suspended);
+
+ /* Exit configuration */
+ outb(0xbb, cfg_base);
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ----------------- End -----------------\n");
+
+
+ return 0;
+}
+
+/*
+ * Function ali_ircc_setup (info)
+ *
+ * Set FIR FIFO and DMA Threshold
+ * Returns non-negative on success.
+ *
+ */
+static int ali_ircc_setup(chipio_t *info)
+{
+ unsigned char tmp;
+ int version;
+ int iobase = info->fir_base;
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ---------------- Start ----------------\n");
+
+ /* Switch to FIR space */
+ SIR2FIR(iobase);
+
+ /* Master Reset */
+ outb(0x40, iobase+FIR_MCR); // benjamin 2000/11/30 11:45AM
+
+ /* Read FIR ID Version Register */
+ switch_bank(iobase, BANK3);
+ version = inb(iobase+FIR_ID_VR);
+
+ /* Should be 0x00 in the M1535/M1535D */
+ if(version != 0x00)
+ {
+ ERROR("%s, Wrong chip version %02x\n", driver_name, version);
+ return -1;
+ }
+
+ // MESSAGE("%s, Found chip at base=0x%03x\n", driver_name, info->cfg_base);
+
+ /* Set FIR FIFO Threshold Register */
+ switch_bank(iobase, BANK1);
+ outb(RX_FIFO_Threshold, iobase+FIR_FIFO_TR);
+
+ /* Set FIR DMA Threshold Register */
+ outb(RX_DMA_Threshold, iobase+FIR_DMA_TR);
+
+ /* CRC enable */
+ switch_bank(iobase, BANK2);
+ outb(inb(iobase+FIR_IRDA_CR) | IRDA_CR_CRC, iobase+FIR_IRDA_CR);
+
+ /* NDIS driver set TX Length here BANK2 Alias 3, Alias4*/
+
+ /* Switch to Bank 0 */
+ switch_bank(iobase, BANK0);
+
+ tmp = inb(iobase+FIR_LCR_B);
+ tmp &=~0x20; // disable SIP
+ tmp |= 0x80; // these two steps make RX mode
+ tmp &= 0xbf;
+ outb(tmp, iobase+FIR_LCR_B);
+
+ /* Disable Interrupt */
+ outb(0x00, iobase+FIR_IER);
+
+
+ /* Switch to SIR space */
+ FIR2SIR(iobase);
+
+ MESSAGE("%s, driver loaded (Benjamin Kong)\n", driver_name);
+
+ /* Enable receive interrupts */
+ // outb(UART_IER_RDI, iobase+UART_IER); //benjamin 2000/11/23 01:25PM
+ // Turn on the interrupts in ali_ircc_net_open
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ----------------- End ------------------\n");
+
+
+ return 0;
+}
+
+/*
+ * Function ali_ircc_read_dongle_id (int index, info)
+ *
+ * Try to read dongle indentification. This procedure needs to be executed
+ * once after power-on/reset. It also needs to be used whenever you suspect
+ * that the user may have plugged/unplugged the IrDA Dongle.
+ */
+static int ali_ircc_read_dongle_id (int i, chipio_t *info)
+{
+ int dongle_id, reg;
+ int cfg_base = info->cfg_base;
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ---------------- Start ----------------\n");
+
+ /* Enter Configuration */
+ outb(chips[i].entr1, cfg_base);
+ outb(chips[i].entr2, cfg_base);
+
+ /* Select Logical Device 5 Registers (UART2) */
+ outb(0x07, cfg_base);
+ outb(0x05, cfg_base+1);
+
+ /* Read Dongle ID */
+ outb(0xf0, cfg_base);
+ reg = inb(cfg_base+1);
+ dongle_id = ((reg>>6)&0x02) | ((reg>>5)&0x01);
+ IRDA_DEBUG(2, __FUNCTION__ "(), probing dongle_id=%d, dongle_types=%s\n",
+ dongle_id, dongle_types[dongle_id]);
+
+ /* Exit configuration */
+ outb(0xbb, cfg_base);
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ----------------- End ------------------\n");
+
+
+ return dongle_id;
+}
+
+/*
+ * Function ali_ircc_interrupt (irq, dev_id, regs)
+ *
+ * An interrupt from the chip has arrived. Time to do some work
+ *
+ */
+static void ali_ircc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = (struct net_device *) dev_id;
+ struct ali_ircc_cb *self;
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ---------------- Start ----------------\n");
+
+ if (!dev) {
+ WARNING("%s: irq %d for unknown device.\n", driver_name, irq);
+ return;
+ }
+
+ self = (struct ali_ircc_cb *) dev->priv;
+
+ spin_lock(&self->lock);
+
+ /* Dispatch interrupt handler for the current speed */
+ if (self->io.speed > 115200)
+ ali_ircc_fir_interrupt(irq, self, regs);
+ else
+ ali_ircc_sir_interrupt(irq, self, regs);
+
+ spin_unlock(&self->lock);
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ----------------- End ------------------\n");
+
+}
+/*
+ * Function ali_ircc_fir_interrupt(irq, struct ali_ircc_cb *self, regs)
+ *
+ * Handle MIR/FIR interrupt
+ *
+ */
+static void ali_ircc_fir_interrupt(int irq, struct ali_ircc_cb *self, struct pt_regs
+*regs)
+{
+ __u8 eir, OldMessageCount;
+ int iobase, tmp;
+
+ IRDA_DEBUG(1, __FUNCTION__ "(), ---------------- Start ----------------\n");
+
+ iobase = self->io.fir_base;
+
+ switch_bank(iobase, BANK0);
+ self->InterruptID = inb(iobase+FIR_IIR);
+ self->BusStatus = inb(iobase+FIR_BSR);
+
+ OldMessageCount = (self->LineStatus + 1) & 0x07;
+ self->LineStatus = inb(iobase+FIR_LSR);
+ //self->ier = inb(iobase+FIR_IER); 2000/12/1 04:32PM
+ eir = self->InterruptID & self->ier; /* Mask out the interesting ones */
+
+ IRDA_DEBUG(1, __FUNCTION__ "(), self->InterruptID = %x\n",self->InterruptID);
+ IRDA_DEBUG(1, __FUNCTION__ "(), self->LineStatus = %x\n",self->LineStatus);
+ IRDA_DEBUG(1, __FUNCTION__ "(), self->ier = %x\n",self->ier);
+ IRDA_DEBUG(1, __FUNCTION__ "(), eir = %x\n",eir);
+
+ /* Disable interrupts */
+ SetCOMInterrupts(self, FALSE);
+
+ /* Tx or Rx Interrupt */
+
+ if (eir & IIR_EOM)
+ {
+ if (self->io.direction == IO_XMIT) /* TX */
+ {
+ IRDA_DEBUG(1, __FUNCTION__ "(), ******* IIR_EOM (Tx)
+*******\n");
+
+ if(ali_ircc_dma_xmit_complete(self))
+ {
+ if (irda_device_txqueue_empty(self->netdev))
+ {
+ /* Prepare for receive */
+ ali_ircc_dma_receive(self);
+
+ self->ier = IER_EOM;
+
+ }
+ }
+ else
+ {
+ self->ier = IER_EOM;
+
+ }
+
+ }
+ else /* RX */
+ {
+ IRDA_DEBUG(1, __FUNCTION__ "(), ******* IIR_EOM (Rx)
+*******\n");
+
+ if(OldMessageCount > ((self->LineStatus+1) & 0x07))
+ {
+ self->rcvFramesOverflow = TRUE;
+ IRDA_DEBUG(1, __FUNCTION__ "(), *******
+self->rcvFramesOverflow = TRUE ******** \n");
+ }
+
+ if (ali_ircc_dma_receive_complete(self))
+ {
+ IRDA_DEBUG(1, __FUNCTION__ "(), ******* receive
+complete ******** \n");
+
+ self->ier = IER_EOM;
+ }
+ else
+ {
+ IRDA_DEBUG(1, __FUNCTION__ "(), ******* Not receive
+complete ******** \n");
+
+ self->ier = IER_EOM | IER_TIMER;
+
+ }
+
+ }
+ }
+ /* Timer Interrupt */
+ else if (eir & IIR_TIMER)
+ {
+ if(OldMessageCount > ((self->LineStatus+1) & 0x07))
+ {
+ self->rcvFramesOverflow = TRUE;
+ IRDA_DEBUG(1, __FUNCTION__ "(), *******
+self->rcvFramesOverflow = TRUE ******* \n");
+ }
+ /* Disable Timer */
+ switch_bank(iobase, BANK1);
+ tmp = inb(iobase+FIR_CR);
+ outb( tmp& ~CR_TIMER_EN, iobase+FIR_CR);
+
+ /* Check if this is a Tx timer interrupt */
+ if (self->io.direction == IO_XMIT)
+ {
+ ali_ircc_dma_xmit(self);
+
+ /* Interrupt on EOM */
+ self->ier = IER_EOM;
+
+ }
+ else /* Rx */
+ {
+ if(ali_ircc_dma_receive_complete(self))
+ {
+ self->ier = IER_EOM;
+ }
+ else
+ {
+ self->ier = IER_EOM | IER_TIMER;
+ }
+ }
+ }
+
+ /* Restore Interrupt */
+ SetCOMInterrupts(self, TRUE);
+
+ IRDA_DEBUG(1, __FUNCTION__ "(), ----------------- End ---------------\n");
+}
+
+/*
+ * Function ali_ircc_sir_interrupt (irq, self, eir)
+ *
+ * Handle SIR interrupt
+ *
+ */
+static void ali_ircc_sir_interrupt(int irq, struct ali_ircc_cb *self, struct pt_regs
+*regs)
+{
+ int iobase;
+ int iir, lsr;
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ---------------- Start ----------------\n");
+
+ iobase = self->io.sir_base;
+
+ iir = inb(iobase+UART_IIR) & UART_IIR_ID;
+ if (iir) {
+ /* Clear interrupt */
+ lsr = inb(iobase+UART_LSR);
+
+ IRDA_DEBUG(4, __FUNCTION__
+ "(), iir=%02x, lsr=%02x, iobase=%#x\n",
+ iir, lsr, iobase);
+
+ switch (iir)
+ {
+ case UART_IIR_RLSI:
+ IRDA_DEBUG(2, __FUNCTION__ "(), RLSI\n");
+ break;
+ case UART_IIR_RDI:
+ /* Receive interrupt */
+ ali_ircc_sir_receive(self);
+ break;
+ case UART_IIR_THRI:
+ if (lsr & UART_LSR_THRE)
+ {
+ /* Transmitter ready for data */
+ ali_ircc_sir_write_wakeup(self);
+
+ }
+ break;
+ default:
+ IRDA_DEBUG(0, __FUNCTION__ "(), unhandled IIR=%#x\n",
+iir);
+ break;
+ }
+
+ }
+
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ----------------- End ------------------\n");
+
+}
+
+
+/*
+ * Function ali_ircc_sir_receive (self)
+ *
+ * Receive one frame from the infrared port
+ *
+ */
+static void ali_ircc_sir_receive(struct ali_ircc_cb *self)
+{
+ int boguscount = 0;
+ int iobase;
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ---------------- Start ----------------\n");
+ ASSERT(self != NULL, return;);
+
+ iobase = self->io.sir_base;
+
+ /*
+ * Receive all characters in Rx FIFO, unwrap and unstuff them.
+ * async_unwrap_char will deliver all found frames
+ */
+ do {
+ async_unwrap_char(self->netdev, &self->stats, &self->rx_buff,
+ inb(iobase+UART_RX));
+
+ /* Make sure we don't stay here to long */
+ if (boguscount++ > 32) {
+ IRDA_DEBUG(2,__FUNCTION__ "(), breaking!\n");
+ break;
+ }
+ } while (inb(iobase+UART_LSR) & UART_LSR_DR);
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ----------------- End ------------------\n");
+
+}
+
+/*
+ * Function ali_ircc_sir_write_wakeup (tty)
+ *
+ * Called by the driver when there's room for more data. If we have
+ * more packets to send, we send them here.
+ *
+ */
+static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self)
+{
+ int actual = 0;
+ int iobase;
+
+ ASSERT(self != NULL, return;);
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ---------------- Start ----------------\n");
+
+ iobase = self->io.sir_base;
+
+ /* Finished with frame? */
+ if (self->tx_buff.len > 0)
+ {
+ /* Write data left in transmit buffer */
+ actual = ali_ircc_sir_write(iobase, self->io.fifo_size,
+ self->tx_buff.data, self->tx_buff.len);
+ self->tx_buff.data += actual;
+ self->tx_buff.len -= actual;
+ }
+ else
+ {
+ if (self->new_speed)
+ {
+ /* We must wait until all data are gone */
+ while(!(inb(iobase+UART_LSR) & UART_LSR_TEMT))
+ IRDA_DEBUG(1, __FUNCTION__ "(), UART_LSR_THRE\n");
+
+ IRDA_DEBUG(1, __FUNCTION__ "(), Changing speed!
+self->new_speed = %d\n", self->new_speed);
+ ali_ircc_change_speed(self, self->new_speed);
+ self->new_speed = 0;
+
+ // benjamin 2000/11/10 06:32PM
+ if (self->io.speed > 115200)
+ {
+ IRDA_DEBUG(2, __FUNCTION__ "(), ali_ircc_change_speed
+from UART_LSR_TEMT \n");
+
+ self->ier = IER_EOM;
+ // SetCOMInterrupts(self, TRUE);
+
+ return;
+
+ }
+ }
+ else
+ {
+ netif_wake_queue(self->netdev);
+ }
+
+ self->stats.tx_packets++;
+
+ /* Turn on receive interrupts */
+ outb(UART_IER_RDI, iobase+UART_IER);
+ }
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ----------------- End ------------------\n");
+
+}
+
+static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud)
+{
+ struct net_device *dev = self->netdev;
+ int iobase;
+
+ IRDA_DEBUG(1, __FUNCTION__ "(), ---------------- Start ----------------\n");
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), setting speed = %d \n", baud);
+
+ iobase = self->io.fir_base;
+
+ SetCOMInterrupts(self, FALSE); // 2000/11/24 11:43AM
+
+ /* Go to MIR, FIR Speed */
+ if (baud > 115200)
+ {
+
+
+ ali_ircc_fir_change_speed(self, baud);
+
+ /* Install FIR xmit handler*/
+ dev->hard_start_xmit = ali_ircc_fir_hard_xmit;
+
+ /* Enable Interuupt */
+ self->ier = IER_EOM; // benjamin 2000/11/20 07:24PM
+
+
+ /* Be ready for incomming frames */
+ ali_ircc_dma_receive(self); // benajmin 2000/11/8 07:46PM not
+complete
+ }
+ /* Go to SIR Speed */
+ else
+ {
+ ali_ircc_sir_change_speed(self, baud);
+
+ /* Install SIR xmit handler*/
+ dev->hard_start_xmit = ali_ircc_sir_hard_xmit;
+ }
+
+
+ SetCOMInterrupts(self, TRUE); // 2000/11/24 11:43AM
+
+ netif_wake_queue(self->netdev);
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ----------------- End ------------------\n");
+
+}
+
+static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 baud)
+{
+
+ int iobase;
+ struct ali_ircc_cb *self = (struct ali_ircc_cb *) priv;
+ struct net_device *dev;
+
+ IRDA_DEBUG(1, __FUNCTION__ "(), ---------------- Start ----------------\n");
+
+ ASSERT(self != NULL, return;);
+
+ dev = self->netdev;
+ iobase = self->io.fir_base;
+
+ IRDA_DEBUG(1, __FUNCTION__ "(), self->io.speed = %d, change to speed =
+%d\n",self->io.speed,baud);
+
+ /* Come from SIR speed */
+ if(self->io.speed <=115200)
+ {
+ SIR2FIR(iobase);
+ }
+
+ /* Update accounting for new speed */
+ self->io.speed = baud;
+
+ // Set Dongle Speed mode
+ ali_ircc_change_dongle_speed(self, baud);
+
+ IRDA_DEBUG(1, __FUNCTION__ "(), ----------------- End ------------------\n");
+
+}
+
+/*
+ * Function ali_sir_change_speed (self, speed)
+ *
+ * Set speed of IrDA port to specified baudrate
+ *
+ */
+static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed)
+{
+ struct ali_ircc_cb *self = (struct ali_ircc_cb *) priv;
+ unsigned long flags;
+ int iobase;
+ int fcr; /* FIFO control reg */
+ int lcr; /* Line control reg */
+ int divisor;
+
+ IRDA_DEBUG(1, __FUNCTION__ "(), ---------------- Start ----------------\n");
+
+ IRDA_DEBUG(1, __FUNCTION__ "(), Setting speed to: %d\n", speed);
+
+ ASSERT(self != NULL, return;);
+
+ iobase = self->io.sir_base;
+
+ /* Come from MIR or FIR speed */
+ if(self->io.speed >115200)
+ {
+ // Set Dongle Speed mode first
+ ali_ircc_change_dongle_speed(self, speed);
+
+ FIR2SIR(iobase);
+ }
+
+ // Clear Line and Auxiluary status registers 2000/11/24 11:47AM
+
+ inb(iobase+UART_LSR);
+ inb(iobase+UART_SCR);
+
+ /* Update accounting for new speed */
+ self->io.speed = speed;
+
+ spin_lock_irqsave(&self->lock, flags);
+
+ divisor = 115200/speed;
+
+ fcr = UART_FCR_ENABLE_FIFO;
+
+ /*
+ * Use trigger level 1 to avoid 3 ms. timeout delay at 9600 bps, and
+ * almost 1,7 ms at 19200 bps. At speeds above that we can just forget
+ * about this timeout since it will always be fast enough.
+ */
+ if (self->io.speed < 38400)
+ fcr |= UART_FCR_TRIGGER_1;
+ else
+ fcr |= UART_FCR_TRIGGER_14;
+
+ /* IrDA ports use 8N1 */
+ lcr = UART_LCR_WLEN8;
+
+ outb(UART_LCR_DLAB | lcr, iobase+UART_LCR); /* Set DLAB */
+ outb(divisor & 0xff, iobase+UART_DLL); /* Set speed */
+ outb(divisor >> 8, iobase+UART_DLM);
+ outb(lcr, iobase+UART_LCR); /* Set 8N1 */
+ outb(fcr, iobase+UART_FCR); /* Enable FIFO's */
+
+ /* without this, the conection will be broken after come back from FIR speed,
+ but with this, the SIR connection is harder to established */
+ outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase+UART_MCR);
+
+ spin_unlock_irqrestore(&self->lock, flags);
+
+ IRDA_DEBUG(1, __FUNCTION__ "(), ----------------- End ------------------\n");
+
+}
+
+static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed)
+{
+
+ struct ali_ircc_cb *self = (struct ali_ircc_cb *) priv;
+ int iobase,dongle_id;
+ unsigned long flags;
+ int tmp = 0;
+
+ IRDA_DEBUG(1, __FUNCTION__ "(), ---------------- Start ----------------\n");
+
+
+ iobase = self->io.fir_base; /* or iobase = self->io.sir_base; */
+ dongle_id = self->io.dongle_id;
+
+ save_flags(flags);
+ cli();
+
+ IRDA_DEBUG(1, __FUNCTION__ "(), Set Speed for %s , Speed = %d\n",
+dongle_types[dongle_id], speed);
+
+ switch_bank(iobase, BANK2);
+ tmp = inb(iobase+FIR_IRDA_CR);
+
+ /* IBM type dongle */
+ if(dongle_id == 0)
+ {
+ if(speed == 4000000)
+ {
+ // __ __
+ // SD/MODE __| |__ __
+ // __ __
+ // IRTX __ __| |__
+ // T1 T2 T3 T4 T5
+
+ tmp &= ~IRDA_CR_HDLC; // HDLC=0
+ tmp |= IRDA_CR_CRC; // CRC=1
+
+ switch_bank(iobase, BANK2);
+ outb(tmp, iobase+FIR_IRDA_CR);
+
+ // T1 -> SD/MODE:0 IRTX:0
+ tmp &= ~0x09;
+ tmp |= 0x02;
+ outb(tmp, iobase+FIR_IRDA_CR);
+ udelay(2);
+
+ // T2 -> SD/MODE:1 IRTX:0
+ tmp &= ~0x01;
+ tmp |= 0x0a;
+ outb(tmp, iobase+FIR_IRDA_CR);
+ udelay(2);
+
+ // T3 -> SD/MODE:1 IRTX:1
+ tmp |= 0x0b;
+ outb(tmp, iobase+FIR_IRDA_CR);
+ udelay(2);
+
+ // T4 -> SD/MODE:0 IRTX:1
+ tmp &= ~0x08;
+ tmp |= 0x03;
+ outb(tmp, iobase+FIR_IRDA_CR);
+ udelay(2);
+
+ // T5 -> SD/MODE:0 IRTX:0
+ tmp &= ~0x09;
+ tmp |= 0x02;
+ outb(tmp, iobase+FIR_IRDA_CR);
+ udelay(2);
+
+ // reset -> Normal TX output Signal
+ outb(tmp & ~0x02, iobase+FIR_IRDA_CR);
+
+ }
+ else /* speed <=1152000 */
+ {
+ // __
+ // SD/MODE __| |__
+ //
+ // IRTX ________
+ // T1 T2 T3
+
+ /* MIR 115200, 57600 */
+ if (speed==1152000)
+ {
+ tmp |= 0xA0; //HDLC=1, 1.152Mbps=1
+ }
+ else
+ {
+ tmp &=~0x80; //HDLC 0.576Mbps
+ tmp |= 0x20; //HDLC=1,
+ }
+
+ tmp |= IRDA_CR_CRC; // CRC=1
+
+ switch_bank(iobase, BANK2);
+ outb(tmp, iobase+FIR_IRDA_CR);
+
+ /* MIR 115200, 57600 */
+
+ //switch_bank(iobase, BANK2);
+ // T1 -> SD/MODE:0 IRTX:0
+ tmp &= ~0x09;
+ tmp |= 0x02;
+ outb(tmp, iobase+FIR_IRDA_CR);
+ udelay(2);
+
+ // T2 -> SD/MODE:1 IRTX:0
+ tmp &= ~0x01;
+ tmp |= 0x0a;
+ outb(tmp, iobase+FIR_IRDA_CR);
+
+ // T3 -> SD/MODE:0 IRTX:0
+ tmp &= ~0x09;
+ tmp |= 0x02;
+ outb(tmp, iobase+FIR_IRDA_CR);
+ udelay(2);
+
+ // reset -> Normal TX output Signal
+ outb(tmp & ~0x02, iobase+FIR_IRDA_CR);
+
+ }
+ }
+ else if (dongle_id == 1) /* HP HDSL-3600 */
+ {
+ switch(speed)
+ {
+ case 4000000:
+ tmp &= ~IRDA_CR_HDLC; // HDLC=0
+ break;
+
+ case 1152000:
+ tmp |= 0xA0; // HDLC=1, 1.152Mbps=1
+ break;
+
+ case 576000:
+ tmp &=~0x80; // HDLC 0.576Mbps
+ tmp |= 0x20; // HDLC=1,
+ break;
+ }
+
+ tmp |= IRDA_CR_CRC; // CRC=1
+
+ switch_bank(iobase, BANK2);
+ outb(tmp, iobase+FIR_IRDA_CR);
+ }
+ else /* HP HDSL-1100 */
+ {
+ if(speed <= 115200) /* SIR */
+ {
+
+ tmp &= ~IRDA_CR_FIR_SIN; // HP sin select = 0
+
+ switch_bank(iobase, BANK2);
+ outb(tmp, iobase+FIR_IRDA_CR);
+ }
+ else /* MIR FIR */
+ {
+
+ switch(speed)
+ {
+ case 4000000:
+ tmp &= ~IRDA_CR_HDLC; // HDLC=0
+ break;
+
+ case 1152000:
+ tmp |= 0xA0; // HDLC=1, 1.152Mbps=1
+ break;
+
+ case 576000:
+ tmp &=~0x80; // HDLC 0.576Mbps
+ tmp |= 0x20; // HDLC=1,
+ break;
+ }
+
+ tmp |= IRDA_CR_CRC; // CRC=1
+ tmp |= IRDA_CR_FIR_SIN; // HP sin select = 1
+
+ switch_bank(iobase, BANK2);
+ outb(tmp, iobase+FIR_IRDA_CR);
+ }
+ }
+
+ switch_bank(iobase, BANK0);
+
+ restore_flags(flags);
+
+ IRDA_DEBUG(1, __FUNCTION__ "(), ----------------- End ------------------\n");
+
+}
+
+/*
+ * Function ali_ircc_sir_write (driver)
+ *
+ * Fill Tx FIFO with transmit data
+ *
+ */
+static int ali_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len)
+{
+ int actual = 0;
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ---------------- Start ----------------\n");
+
+ /* Tx FIFO should be empty! */
+ if (!(inb(iobase+UART_LSR) & UART_LSR_THRE)) {
+ IRDA_DEBUG(0, __FUNCTION__ "(), failed, fifo not empty!\n");
+ return 0;
+ }
+
+ /* Fill FIFO with current frame */
+ while ((fifo_size-- > 0) && (actual < len)) {
+ /* Transmit next byte */
+ outb(buf[actual], iobase+UART_TX);
+
+ actual++;
+ }
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ----------------- End ------------------\n");
+
+ return actual;
+}
+
+/*
+ * Function ali_ircc_net_init (dev)
+ *
+ * Initialize network device
+ *
+ */
+static int ali_ircc_net_init(struct net_device *dev)
+{
+ IRDA_DEBUG(2, __FUNCTION__ "(), ---------------- Start ----------------\n");
+
+ /* Setup to be a normal IrDA network device driver */
+ irda_device_setup(dev);
+
+ /* Insert overrides below this line! */
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ----------------- End ------------------\n");
+
+
+ return 0;
+}
+
+/*
+ * Function ali_ircc_net_open (dev)
+ *
+ * Start the device
+ *
+ */
+static int ali_ircc_net_open(struct net_device *dev)
+{
+ struct ali_ircc_cb *self;
+ int iobase;
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ---------------- Start ----------------\n");
+
+ ASSERT(dev != NULL, return -1;);
+
+ self = (struct ali_ircc_cb *) dev->priv;
+
+ ASSERT(self != NULL, return 0;);
+
+ iobase = self->io.fir_base;
+
+ /* Request IRQ and install Interrupt Handler */
+ if (request_irq(self->io.irq, ali_ircc_interrupt, 0, dev->name, dev))
+ {
+ WARNING("%s, unable to allocate irq=%d\n", driver_name,
+ self->io.irq);
+ return -EAGAIN;
+ }
+
+ /*
+ * Always allocate the DMA channel after the IRQ, and clean up on
+ * failure.
+ */
+ if (request_dma(self->io.dma, dev->name)) {
+ WARNING("%s, unable to allocate dma=%d\n", driver_name,
+ self->io.dma);
+ free_irq(self->io.irq, self);
+ return -EAGAIN;
+ }
+
+ /* Turn on interrups */
+ outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, iobase+UART_IER);
+
+ /* Ready to play! */
+ netif_start_queue(dev); //benjamin by irport
+
+ /*
+ * Open new IrLAP layer instance, now that everything should be
+ * initialized properly
+ */
+ self->irlap = irlap_open(dev, &self->qos);
+
+ MOD_INC_USE_COUNT;
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ----------------- End ------------------\n");
+
+
+ return 0;
+}
+
+/*
+ * Function ali_ircc_net_close (dev)
+ *
+ * Stop the device
+ *
+ */
+static int ali_ircc_net_close(struct net_device *dev)
+{
+
+ struct ali_ircc_cb *self;
+ //int iobase;
+
+ IRDA_DEBUG(4, __FUNCTION__ "(), ---------------- Start ----------------\n");
+
+ ASSERT(dev != NULL, return -1;);
+
+ self = (struct ali_ircc_cb *) dev->priv;
+ ASSERT(self != NULL, return 0;);
+
+ /* Stop device */
+ netif_stop_queue(dev);
+
+ /* Stop and remove instance of IrLAP */
+ if (self->irlap)
+ irlap_close(self->irlap);
+ self->irlap = NULL;
+
+ disable_dma(self->io.dma);
+
+ /* Disable interrupts */
+ SetCOMInterrupts(self, FALSE);
+
+ free_irq(self->io.irq, dev);
+ free_dma(self->io.dma);
+
+ MOD_DEC_USE_COUNT;
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ----------------- End ------------------\n");
+
+
+ return 0;
+}
+
+/*
+ * Function ali_ircc_fir_hard_xmit (skb, dev)
+ *
+ * Transmit the frame
+ *
+ */
+static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct ali_ircc_cb *self;
+ unsigned long flags;
+ int iobase;
+ __u32 speed;
+ int mtt, diff;
+
+ IRDA_DEBUG(1, __FUNCTION__ "(), ---------------- Start -----------------\n");
+
+
+ self = (struct ali_ircc_cb *) dev->priv;
+ iobase = self->io.fir_base;
+
+ netif_stop_queue(dev);
+
+ /* Check if we need to change the speed */
+ speed = irda_get_next_speed(skb);
+ if ((speed != self->io.speed) && (speed != -1)) {
+ /* Check for empty frame */
+ if (!skb->len) {
+ ali_ircc_change_speed(self, speed);
+ dev_kfree_skb(skb);
+ return 0;
+ } else
+ self->new_speed = speed;
+ }
+
+ spin_lock_irqsave(&self->lock, flags);
+
+ /* Register and copy this frame to DMA memory */
+ self->tx_fifo.queue[self->tx_fifo.free].start = self->tx_fifo.tail;
+ self->tx_fifo.queue[self->tx_fifo.free].len = skb->len;
+ self->tx_fifo.tail += skb->len;
+
+ self->stats.tx_bytes += skb->len;
+
+ memcpy(self->tx_fifo.queue[self->tx_fifo.free].start, skb->data,
+ skb->len);
+
+ self->tx_fifo.len++;
+ self->tx_fifo.free++;
+
+ /* Start transmit only if there is currently no transmit going on */
+ if (self->tx_fifo.len == 1)
+ {
+ /* Check if we must wait the min turn time or not */
+ mtt = irda_get_mtt(skb);
+
+ if (mtt)
+ {
+ /* Check how much time we have used already */
+ get_fast_time(&self->now);
+
+ diff = self->now.tv_usec - self->stamp.tv_usec;
+ /* self->stamp is set from ali_ircc_dma_receive_complete() */
+
+ IRDA_DEBUG(1, __FUNCTION__ "(), ******* diff = %d ******* \n",
+diff);
+
+ if (diff < 0)
+ diff += 1000000;
+
+ /* Check if the mtt is larger than the time we have
+ * already used by all the protocol processing
+ */
+ if (mtt > diff)
+ {
+ mtt -= diff;
+
+ /*
+ * Use timer if delay larger than 1000 us, and
+ * use udelay for smaller values which should
+ * be acceptable
+ */
+ if (mtt > 500)
+ {
+ /* Adjust for timer resolution */
+ mtt = (mtt+250) / 500; /* 4 discard, 5 get
+advanced, Let's round off */
+
+ IRDA_DEBUG(1, __FUNCTION__ "(), **************
+mtt = %d ***********\n", mtt);
+
+ /* Setup timer */
+ if (mtt == 1) /* 500 us */
+ {
+ switch_bank(iobase, BANK1);
+ outb(TIMER_IIR_500,
+iobase+FIR_TIMER_IIR);
+ }
+ else if (mtt == 2) /* 1 ms */
+ {
+ switch_bank(iobase, BANK1);
+ outb(TIMER_IIR_1ms,
+iobase+FIR_TIMER_IIR);
+ }
+ else /* > 2ms -> 4ms */
+ {
+ switch_bank(iobase, BANK1);
+ outb(TIMER_IIR_2ms,
+iobase+FIR_TIMER_IIR);
+ }
+
+
+ /* Start timer */
+ outb(inb(iobase+FIR_CR) | CR_TIMER_EN,
+iobase+FIR_CR);
+ self->io.direction = IO_XMIT;
+
+ /* Enable timer interrupt */
+ self->ier = IER_TIMER;
+ SetCOMInterrupts(self, TRUE);
+
+
+ /* Timer will take care of the rest */
+ goto out;
+ }
+ else
+ udelay(mtt);
+ } // if (if (mtt > diff)
+ }// if (mtt)
+
+ /* Enable EOM interrupt */
+ self->ier = IER_EOM;
+ SetCOMInterrupts(self, TRUE);
+
+ /* Transmit frame */
+ ali_ircc_dma_xmit(self);
+ } // if (self->tx_fifo.len == 1)
+
+ out:
+
+ /* Not busy transmitting anymore if window is not full */
+ if (self->tx_fifo.free < MAX_TX_WINDOW)
+ netif_wake_queue(self->netdev);
+
+ /* Restore bank register */
+ switch_bank(iobase, BANK0);
+
+ spin_unlock_irqrestore(&self->lock, flags);
+ dev_kfree_skb(skb);
+
+ IRDA_DEBUG(1, __FUNCTION__ "(), ----------------- End ------------------\n");
+
+ return 0;
+}
+
+
+static void ali_ircc_dma_xmit(struct ali_ircc_cb *self)
+{
+ int iobase, tmp;
+ unsigned char FIFO_OPTI, Hi, Lo;
+
+
+ IRDA_DEBUG(1, __FUNCTION__ "(), ---------------- Start -----------------\n");
+
+
+ iobase = self->io.fir_base;
+
+ /* FIFO threshold , this method comes from NDIS5 code */
+
+ if(self->tx_fifo.queue[self->tx_fifo.ptr].len < TX_FIFO_Threshold)
+ FIFO_OPTI = self->tx_fifo.queue[self->tx_fifo.ptr].len-1;
+ else
+ FIFO_OPTI = TX_FIFO_Threshold;
+
+ /* Disable DMA */
+ switch_bank(iobase, BANK1);
+ outb(inb(iobase+FIR_CR) & ~CR_DMA_EN, iobase+FIR_CR);
+
+ self->io.direction = IO_XMIT;
+
+ setup_dma(self->io.dma,
+ self->tx_fifo.queue[self->tx_fifo.ptr].start,
+ self->tx_fifo.queue[self->tx_fifo.ptr].len,
+ DMA_TX_MODE);
+
+ /* Reset Tx FIFO */
+ switch_bank(iobase, BANK0);
+ outb(LCR_A_FIFO_RESET, iobase+FIR_LCR_A);
+
+ /* Set Tx FIFO threshold */
+ if (self->fifo_opti_buf!=FIFO_OPTI)
+ {
+ switch_bank(iobase, BANK1);
+ outb(FIFO_OPTI, iobase+FIR_FIFO_TR) ;
+ self->fifo_opti_buf=FIFO_OPTI;
+ }
+
+ /* Set Tx DMA threshold */
+ switch_bank(iobase, BANK1);
+ outb(TX_DMA_Threshold, iobase+FIR_DMA_TR);
+
+ /* Set max Tx frame size */
+ Hi = (self->tx_fifo.queue[self->tx_fifo.ptr].len >> 8) & 0x0f;
+ Lo = self->tx_fifo.queue[self->tx_fifo.ptr].len & 0xff;
+ switch_bank(iobase, BANK2);
+ outb(Hi, iobase+FIR_TX_DSR_HI);
+ outb(Lo, iobase+FIR_TX_DSR_LO);
+
+ /* Disable SIP , Disable Brick Wall (we don't support in TX mode), Change to
+TX mode */
+ switch_bank(iobase, BANK0);
+ tmp = inb(iobase+FIR_LCR_B);
+ tmp &= ~0x20; // Disable SIP
+ outb(((unsigned char)(tmp & 0x3f) | LCR_B_TX_MODE) & ~LCR_B_BW,
+iobase+FIR_LCR_B);
+ IRDA_DEBUG(1, __FUNCTION__ "(), ******* Change to TX mode: FIR_LCR_B = 0x%x
+******* \n", inb(iobase+FIR_LCR_B));
+
+ outb(0, iobase+FIR_LSR);
+
+ /* Enable DMA and Burst Mode */
+ switch_bank(iobase, BANK1);
+ outb(inb(iobase+FIR_CR) | CR_DMA_EN | CR_DMA_BURST, iobase+FIR_CR);
+
+ switch_bank(iobase, BANK0);
+
+ IRDA_DEBUG(1, __FUNCTION__ "(), ----------------- End ------------------\n");
+}
+
+static int ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self)
+{
+ int iobase;
+ int ret = TRUE;
+
+ IRDA_DEBUG(1, __FUNCTION__ "(), ---------------- Start -----------------\n");
+
+
+ iobase = self->io.fir_base;
+
+ /* Disable DMA */
+ switch_bank(iobase, BANK1);
+ outb(inb(iobase+FIR_CR) & ~CR_DMA_EN, iobase+FIR_CR);
+
+ /* Check for underrun! */
+ switch_bank(iobase, BANK0);
+ if((inb(iobase+FIR_LSR) & LSR_FRAME_ABORT) == LSR_FRAME_ABORT)
+
+ {
+ ERROR(__FUNCTION__ "(), ********* LSR_FRAME_ABORT *********\n");
+
+ self->stats.tx_errors++;
+ self->stats.tx_fifo_errors++;
+ }
+ else
+ {
+ self->stats.tx_packets++;
+ }
+
+ /* Check if we need to change the speed */
+ if (self->new_speed)
+ {
+ ali_ircc_change_speed(self, self->new_speed);
+ self->new_speed = 0;
+ }
+
+ /* Finished with this frame, so prepare for next */
+ self->tx_fifo.ptr++;
+ self->tx_fifo.len--;
+
+ /* Any frames to be sent back-to-back? */
+ if (self->tx_fifo.len)
+ {
+ ali_ircc_dma_xmit(self);
+
+ /* Not finished yet! */
+ ret = FALSE;
+ }
+ else
+ { /* Reset Tx FIFO info */
+ self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
+ self->tx_fifo.tail = self->tx_buff.head;
+ }
+
+ /* Make sure we have room for more frames */
+ if (self->tx_fifo.free < MAX_TX_WINDOW) {
+ /* Not busy transmitting anymore */
+ /* Tell the network layer, that we can accept more frames */
+ netif_wake_queue(self->netdev);
+ }
+
+ switch_bank(iobase, BANK0);
+
+ IRDA_DEBUG(1, __FUNCTION__ "(), ----------------- End ------------------\n");
+
+ return ret;
+}
+
+/*
+ * Function ali_ircc_dma_receive (self)
+ *
+ * Get ready for receiving a frame. The device will initiate a DMA
+ * if it starts to receive a frame.
+ *
+ */
+static int ali_ircc_dma_receive(struct ali_ircc_cb *self)
+{
+ int iobase, tmp;
+
+ IRDA_DEBUG(1, __FUNCTION__ "(), ---------------- Start -----------------\n");
+
+
+ iobase = self->io.fir_base;
+
+ /* Reset Tx FIFO info */
+ self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
+ self->tx_fifo.tail = self->tx_buff.head;
+
+ /* Disable DMA */
+ switch_bank(iobase, BANK1);
+ outb(inb(iobase+FIR_CR) & ~CR_DMA_EN, iobase+FIR_CR);
+
+ /* Reset Message Count */
+ switch_bank(iobase, BANK0);
+ outb(0x07, iobase+FIR_LSR);
+
+ self->rcvFramesOverflow = FALSE;
+
+ self->LineStatus = inb(iobase+FIR_LSR) ;
+
+ /* Reset Rx FIFO info */
+ self->io.direction = IO_RECV;
+ self->rx_buff.data = self->rx_buff.head;
+
+ /* Reset Rx FIFO */
+ // switch_bank(iobase, BANK0);
+ outb(LCR_A_FIFO_RESET, iobase+FIR_LCR_A);
+
+ self->st_fifo.len = self->st_fifo.pending_bytes = 0;
+ self->st_fifo.tail = self->st_fifo.head = 0;
+
+ setup_dma(self->io.dma, self->rx_buff.data, self->rx_buff.truesize,
+ DMA_RX_MODE);
+
+ /* Set Receive Mode,Brick Wall */
+ //switch_bank(iobase, BANK0);
+ tmp = inb(iobase+FIR_LCR_B);
+ outb((unsigned char)(tmp &0x3f) | LCR_B_RX_MODE | LCR_B_BW , iobase +
+FIR_LCR_B); // 2000/12/1 05:16PM
+ IRDA_DEBUG(1, __FUNCTION__ "(), *** Change To RX mode: FIR_LCR_B = 0x%x ***
+\n", inb(iobase+FIR_LCR_B));
+
+ /* Set Rx Threshold */
+ switch_bank(iobase, BANK1);
+ outb(RX_FIFO_Threshold, iobase+FIR_FIFO_TR);
+ outb(RX_DMA_Threshold, iobase+FIR_DMA_TR);
+
+ /* Enable DMA and Burst Mode */
+ // switch_bank(iobase, BANK1);
+ outb(CR_DMA_EN | CR_DMA_BURST, iobase+FIR_CR);
+
+ switch_bank(iobase, BANK0);
+ IRDA_DEBUG(1, __FUNCTION__ "(), ----------------- End ------------------\n");
+
+ return 0;
+}
+
+static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
+{
+ struct st_fifo *st_fifo;
+ struct sk_buff *skb;
+ __u8 status, MessageCount;
+ int len, i, iobase, val;
+
+ IRDA_DEBUG(1, __FUNCTION__ "(), ---------------- Start -----------------\n");
+
+
+ st_fifo = &self->st_fifo;
+ iobase = self->io.fir_base;
+
+ switch_bank(iobase, BANK0);
+ MessageCount = inb(iobase+ FIR_LSR)&0x07;
+
+ if (MessageCount > 0)
+ IRDA_DEBUG(0, __FUNCTION__ "(), Messsage count = %d,\n",
+MessageCount);
+
+ for (i=0; i<=MessageCount; i++)
+ {
+ /* Bank 0 */
+ switch_bank(iobase, BANK0);
+ status = inb(iobase+FIR_LSR);
+
+ switch_bank(iobase, BANK2);
+ len = inb(iobase+FIR_RX_DSR_HI) & 0x0f;
+ len = len << 8;
+ len |= inb(iobase+FIR_RX_DSR_LO);
+
+ IRDA_DEBUG(1, __FUNCTION__ "(), RX Length = 0x%.2x,\n", len);
+ IRDA_DEBUG(1, __FUNCTION__ "(), RX Status = 0x%.2x,\n", status);
+
+ if (st_fifo->tail >= MAX_RX_WINDOW) {
+ IRDA_DEBUG(0, __FUNCTION__ "(), window is full!\n");
+ continue;
+ }
+
+ st_fifo->entries[st_fifo->tail].status = status;
+ st_fifo->entries[st_fifo->tail].len = len;
+ st_fifo->pending_bytes += len;
+ st_fifo->tail++;
+ st_fifo->len++;
+ }
+
+ for (i=0; i<=MessageCount; i++)
+ {
+ /* Get first entry */
+ status = st_fifo->entries[st_fifo->head].status;
+ len = st_fifo->entries[st_fifo->head].len;
+ st_fifo->pending_bytes -= len;
+ st_fifo->head++;
+ st_fifo->len--;
+
+ /* Check for errors */
+ if ((status & 0xd8) || self->rcvFramesOverflow || (len==0))
+
+ {
+ IRDA_DEBUG(0,__FUNCTION__ "(), ************* RX Errors
+************ \n");
+
+ /* Skip frame */
+ self->stats.rx_errors++;
+
+ self->rx_buff.data += len;
+
+ if (status & LSR_FIFO_UR)
+ {
+ self->stats.rx_frame_errors++;
+ IRDA_DEBUG(0,__FUNCTION__ "(), ************* FIFO
+Errors ************ \n");
+ }
+ if (status & LSR_FRAME_ERROR)
+ {
+ self->stats.rx_frame_errors++;
+ IRDA_DEBUG(0,__FUNCTION__ "(), ************* FRAME
+Errors ************ \n");
+ }
+
+ if (status & LSR_CRC_ERROR)
+ {
+ self->stats.rx_crc_errors++;
+ IRDA_DEBUG(0,__FUNCTION__ "(), ************* CRC
+Errors ************ \n");
+ }
+
+ if(self->rcvFramesOverflow)
+ {
+ self->stats.rx_frame_errors++;
+ IRDA_DEBUG(0,__FUNCTION__ "(), ************* Overran
+DMA buffer ************ \n");
+
+ }
+ if(len == 0)
+ {
+ self->stats.rx_frame_errors++;
+ IRDA_DEBUG(0,__FUNCTION__ "(), ********** Receive
+Frame Size = 0 ********* \n");
+ }
+ }
+ else
+ {
+
+ if (st_fifo->pending_bytes < 32)
+ {
+ switch_bank(iobase, BANK0);
+ val = inb(iobase+FIR_BSR);
+ if ((val& BSR_FIFO_NOT_EMPTY)== 0x80)
+ {
+ IRDA_DEBUG(0, __FUNCTION__ "(), *************
+BSR_FIFO_NOT_EMPTY ************ \n");
+
+ /* Put this entry back in fifo */
+ st_fifo->head--;
+ st_fifo->len++;
+ st_fifo->pending_bytes += len;
+ st_fifo->entries[st_fifo->head].status =
+status;
+ st_fifo->entries[st_fifo->head].len = len;
+
+ /*
+ * DMA not finished yet, so try again
+ * later, set timer value, resolution
+ * 500 us
+ */
+
+ switch_bank(iobase, BANK1);
+ outb(TIMER_IIR_500, iobase+FIR_TIMER_IIR); //
+2001/1/2 05:07PM
+
+ /* Enable Timer */
+ outb(inb(iobase+FIR_CR) | CR_TIMER_EN,
+iobase+FIR_CR);
+
+ return FALSE; /* I'll be back! */
+ }
+ }
+
+ /*
+ * Remember the time we received this frame, so we can
+ * reduce the min turn time a bit since we will know
+ * how much time we have used for protocol processing
+ */
+ get_fast_time(&self->stamp);
+
+ skb = dev_alloc_skb(len+1);
+ if (skb == NULL)
+ {
+ WARNING(__FUNCTION__ "(), memory squeeze, "
+ "dropping frame.\n");
+ self->stats.rx_dropped++;
+
+ return FALSE;
+ }
+
+ /* Make sure IP header gets aligned */
+ skb_reserve(skb, 1);
+
+ /* Copy frame without CRC, CRC is removed by hardware*/
+ skb_put(skb, len);
+ memcpy(skb->data, self->rx_buff.data, len);
+
+ /* Move to next frame */
+ self->rx_buff.data += len;
+ self->stats.rx_bytes += len;
+ self->stats.rx_packets++;
+
+ skb->dev = self->netdev;
+ skb->mac.raw = skb->data;
+ skb->protocol = htons(ETH_P_IRDA);
+ netif_rx(skb);
+ }
+ }
+
+ switch_bank(iobase, BANK0);
+
+ IRDA_DEBUG(1, __FUNCTION__ "(), ----------------- End ------------------\n");
+
+ return TRUE;
+}
+
+
+
+/*
+ * Function ali_ircc_sir_hard_xmit (skb, dev)
+ *
+ * Transmit the frame!
+ *
+ */
+static int ali_ircc_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct ali_ircc_cb *self;
+ unsigned long flags;
+ int iobase;
+ __u32 speed;
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ---------------- Start ----------------\n");
+
+ ASSERT(dev != NULL, return 0;);
+
+ self = (struct ali_ircc_cb *) dev->priv;
+ ASSERT(self != NULL, return 0;);
+
+ iobase = self->io.sir_base;
+
+ netif_stop_queue(dev);
+
+ /* Check if we need to change the speed */
+ speed = irda_get_next_speed(skb);
+ if ((speed != self->io.speed) && (speed != -1)) {
+ /* Check for empty frame */
+ if (!skb->len) {
+ ali_ircc_change_speed(self, speed);
+ dev_kfree_skb(skb);
+ return 0;
+ } else
+ self->new_speed = speed;
+ }
+
+ spin_lock_irqsave(&self->lock, flags);
+
+ /* Init tx buffer */
+ self->tx_buff.data = self->tx_buff.head;
+
+ /* Copy skb to tx_buff while wrapping, stuffing and making CRC */
+ self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data,
+ self->tx_buff.truesize);
+
+ self->stats.tx_bytes += self->tx_buff.len;
+
+ /* Turn on transmit finished interrupt. Will fire immediately! */
+ outb(UART_IER_THRI, iobase+UART_IER);
+
+ spin_unlock_irqrestore(&self->lock, flags);
+
+ dev_kfree_skb(skb);
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ----------------- End ------------------\n");
+
+
+ return 0;
+}
+
+
+/*
+ * Function ali_ircc_net_ioctl (dev, rq, cmd)
+ *
+ * Process IOCTL commands for this device
+ *
+ */
+static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct if_irda_req *irq = (struct if_irda_req *) rq;
+ struct ali_ircc_cb *self;
+ unsigned long flags;
+ int ret = 0;
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ---------------- Start ----------------\n");
+
+ ASSERT(dev != NULL, return -1;);
+
+ self = dev->priv;
+
+ ASSERT(self != NULL, return -1;);
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), %s, (cmd=0x%X)\n", dev->name, cmd);
+
+ /* Disable interrupts & save flags */
+ save_flags(flags);
+ cli();
+
+ switch (cmd) {
+ case SIOCSBANDWIDTH: /* Set bandwidth */
+ IRDA_DEBUG(1, __FUNCTION__ "(), SIOCSBANDWIDTH\n");
+ /*
+ * This function will also be used by IrLAP to change the
+ * speed, so we still must allow for speed change within
+ * interrupt context.
+ */
+ if (!in_interrupt() && !capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ ali_ircc_change_speed(self, irq->ifr_baudrate);
+ break;
+ case SIOCSMEDIABUSY: /* Set media busy */
+ IRDA_DEBUG(1, __FUNCTION__ "(), SIOCSMEDIABUSY\n");
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ irda_device_set_media_busy(self->netdev, TRUE);
+ break;
+ case SIOCGRECEIVING: /* Check if we are receiving right now */
+ IRDA_DEBUG(2, __FUNCTION__ "(), SIOCGRECEIVING\n");
+ irq->ifr_receiving = ali_ircc_is_receiving(self);
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ }
+
+ restore_flags(flags);
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ----------------- End ------------------\n");
+
+
+ return ret;
+}
+
+/*
+ * Function ali_ircc_is_receiving (self)
+ *
+ * Return TRUE is we are currently receiving a frame
+ *
+ */
+static int ali_ircc_is_receiving(struct ali_ircc_cb *self)
+{
+ unsigned long flags;
+ int status = FALSE;
+ int iobase;
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ---------------- Start -----------------\n");
+
+ ASSERT(self != NULL, return FALSE;);
+
+ spin_lock_irqsave(&self->lock, flags);
+
+ if (self->io.speed > 115200)
+ {
+ iobase = self->io.fir_base;
+
+ switch_bank(iobase, BANK1);
+ if((inb(iobase+FIR_FIFO_FR) & 0x3f) != 0)
+ {
+ /* We are receiving something */
+ IRDA_DEBUG(1, __FUNCTION__ "(), We are receiving something\n");
+ status = TRUE;
+ }
+ switch_bank(iobase, BANK0);
+ }
+ else
+ {
+ status = (self->rx_buff.state != OUTSIDE_FRAME);
+ }
+
+ spin_unlock_irqrestore(&self->lock, flags);
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ----------------- End ------------------\n");
+
+ return status;
+}
+
+static struct net_device_stats *ali_ircc_net_get_stats(struct net_device *dev)
+{
+ struct ali_ircc_cb *self = (struct ali_ircc_cb *) dev->priv;
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ---------------- Start ----------------\n");
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ----------------- End ------------------\n");
+
+
+ return &self->stats;
+}
+
+static void ali_ircc_suspend(struct ali_ircc_cb *self)
+{
+ IRDA_DEBUG(2, __FUNCTION__ "(), ---------------- Start ----------------\n");
+
+ MESSAGE("%s, Suspending\n", driver_name);
+
+ if (self->io.suspended)
+ return;
+
+ ali_ircc_net_close(self->netdev);
+
+ self->io.suspended = 1;
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ----------------- End ------------------\n");
+
+}
+
+static void ali_ircc_wakeup(struct ali_ircc_cb *self)
+{
+ IRDA_DEBUG(2, __FUNCTION__ "(), ---------------- Start ----------------\n");
+
+ if (!self->io.suspended)
+ return;
+
+ ali_ircc_net_open(self->netdev);
+
+ MESSAGE("%s, Waking up\n", driver_name);
+
+ self->io.suspended = 0;
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ----------------- End ------------------\n");
+
+}
+
+static int ali_ircc_pmproc(struct pm_dev *dev, pm_request_t rqst, void *data)
+{
+ struct ali_ircc_cb *self = (struct ali_ircc_cb*) dev->data;
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ---------------- Start ----------------\n");
+
+ if (self) {
+ switch (rqst) {
+ case PM_SUSPEND:
+ ali_ircc_suspend(self);
+ break;
+ case PM_RESUME:
+ ali_ircc_wakeup(self);
+ break;
+ }
+ }
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ----------------- End ------------------\n");
+
+
+ return 0;
+}
+
+
+/* ALi Chip Function */
+
+static void SetCOMInterrupts(struct ali_ircc_cb *self , unsigned char enable)
+{
+
+ unsigned char newMask;
+
+ int iobase = self->io.fir_base; /* or sir_base */
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), -------- Start -------- ( Enable = %d )\n",
+enable);
+
+ /* Enable the interrupt which we wish to */
+ if (enable){
+ if (self->io.direction == IO_XMIT)
+ {
+ if (self->io.speed > 115200) /* FIR, MIR */
+ {
+ newMask = self->ier;
+ }
+ else /* SIR */
+ {
+ newMask = UART_IER_THRI | UART_IER_RDI;
+ }
+ }
+ else {
+ if (self->io.speed > 115200) /* FIR, MIR */
+ {
+ newMask = self->ier;
+ }
+ else /* SIR */
+ {
+ newMask = UART_IER_RDI;
+ }
+ }
+ }
+ else /* Disable all the interrupts */
+ {
+ newMask = 0x00;
+
+ }
+
+ //SIR and FIR has different registers
+ if (self->io.speed > 115200)
+ {
+ switch_bank(iobase, BANK0);
+ outb(newMask, iobase+FIR_IER);
+ }
+ else
+ outb(newMask, iobase+UART_IER);
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), ----------------- End ------------------\n");
+
+}
+
+static void SIR2FIR(int iobase)
+{
+ //unsigned char tmp;
+ unsigned long flags;
+
+ IRDA_DEBUG(1, __FUNCTION__ "(), ---------------- Start ----------------\n");
+
+ save_flags(flags);
+ cli();
+
+ outb(0x28, iobase+UART_MCR);
+ outb(0x68, iobase+UART_MCR);
+ outb(0x88, iobase+UART_MCR);
+
+ restore_flags(flags);
+
+ outb(0x60, iobase+FIR_MCR); /* Master Reset */
+ outb(0x20, iobase+FIR_MCR); /* Master Interrupt Enable */
+
+ //tmp = inb(iobase+FIR_LCR_B); /* SIP enable */
+ //tmp |= 0x20;
+ //outb(tmp, iobase+FIR_LCR_B);
+
+ IRDA_DEBUG(1, __FUNCTION__ "(), ----------------- End ------------------\n");
+
+}
+
+static void FIR2SIR(int iobase)
+{
+ unsigned char val;
+ unsigned long flags;
+
+ IRDA_DEBUG(1, __FUNCTION__ "(), ---------------- Start ----------------\n");
+
+ save_flags(flags);
+ cli();
+
+ outb(0x20, iobase+FIR_MCR); /* IRQ to low */
+ outb(0x00, iobase+UART_IER);
+
+ outb(0xA0, iobase+FIR_MCR); /* Don't set master reset */
+ outb(0x00, iobase+UART_FCR);
+ outb(0x07, iobase+UART_FCR);
+
+ val = inb(iobase+UART_RX);
+ val = inb(iobase+UART_LSR);
+ val = inb(iobase+UART_MSR);
+
+ restore_flags(flags);
+
+ IRDA_DEBUG(1, __FUNCTION__ "(), ----------------- End ------------------\n");
+}
+
+#ifdef MODULE
+MODULE_AUTHOR("Benjamin Kong <[EMAIL PROTECTED]>");
+MODULE_DESCRIPTION("ALi FIR Controller Driver");
+
+MODULE_PARM(io, "1-4i");
+MODULE_PARM_DESC(io, "Base I/O addresses");
+MODULE_PARM(irq, "1-4i");
+MODULE_PARM_DESC(irq, "IRQ lines");
+MODULE_PARM(dma, "1-4i");
+MODULE_PARM_DESC(dma, "DMA channels");
+
+int init_module(void)
+{
+ return ali_ircc_init();
+}
+
+void cleanup_module(void)
+{
+ ali_ircc_cleanup();
+}
+#endif /* MODULE */
diff -urpN linux-2.4.2/include/net/irda/ali-ircc.h
linux-2.4.2-irda-patch/include/net/irda/ali-ircc.h
--- linux-2.4.2/include/net/irda/ali-ircc.h Thu Jan 1 01:00:00 1970
+++ linux-2.4.2-irda-patch/include/net/irda/ali-ircc.h Tue Feb 27 09:16:01 2001
@@ -0,0 +1,229 @@
+/*********************************************************************
+ *
+ * Filename: ali-ircc.h
+ * Version: 0.5
+ * Description: Driver for the ALI M1535D and M1543C FIR Controller
+ * Status: Experimental.
+ * Author: Benjamin Kong <[EMAIL PROTECTED]>
+ * Created at: 2000/10/16 03:46PM
+ * Modified at: 2001/1/3 02:56PM
+ * Modified by: Benjamin Kong <[EMAIL PROTECTED]>
+ *
+ * Copyright (c) 2000 Benjamin Kong <[EMAIL PROTECTED]>
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ ********************************************************************/
+
+#ifndef ALI_IRCC_H
+#define ALI_IRCC_H
+
+#include <linux/time.h>
+
+#include <linux/spinlock.h>
+#include <linux/pm.h>
+#include <asm/io.h>
+
+/* SIR Register */
+/* Usr definition of linux/serial_reg.h */
+
+/* FIR Register */
+#define BANK0 0x20
+#define BANK1 0x21
+#define BANK2 0x22
+#define BANK3 0x23
+
+#define FIR_MCR 0x07 /* Master Control Register */
+
+/* Bank 0 */
+#define FIR_DR 0x00 /* Alias 0, FIR Data Register (R/W) */
+#define FIR_IER 0x01 /* Alias 1, FIR Interrupt Enable Register
+(R/W) */
+#define FIR_IIR 0x02 /* Alias 2, FIR Interrupt Identification
+Register (Read only) */
+#define FIR_LCR_A 0x03 /* Alias 3, FIR Line Control Register A (R/W) */
+#define FIR_LCR_B 0x04 /* Alias 4, FIR Line Control Register B (R/W) */
+#define FIR_LSR 0x05 /* Alias 5, FIR Line Status Register (R/W) */
+#define FIR_BSR 0x06 /* Alias 6, FIR Bus Status Register (Read
+only) */
+
+
+ /* Alias 1 */
+ #define IER_FIFO 0x10 /* FIR FIFO Interrupt Enable */
+ #define IER_TIMER 0x20 /* Timer Interrupt Enable */
+ #define IER_EOM 0x40 /* End of Message Interrupt Enable */
+ #define IER_ACT 0x80 /* Active Frame Interrupt Enable */
+
+ /* Alias 2 */
+ #define IIR_FIFO 0x10 /* FIR FIFO Interrupt */
+ #define IIR_TIMER 0x20 /* Timer Interrupt */
+ #define IIR_EOM 0x40 /* End of Message Interrupt */
+ #define IIR_ACT 0x80 /* Active Frame Interrupt */
+
+ /* Alias 3 */
+ #define LCR_A_FIFO_RESET 0x80 /* FIFO Reset */
+
+ /* Alias 4 */
+ #define LCR_B_BW 0x10 /* Brick Wall */
+ #define LCR_B_SIP 0x20 /* SIP Enable */
+ #define LCR_B_TX_MODE 0x40 /* Transmit Mode */
+ #define LCR_B_RX_MODE 0x80 /* Receive Mode */
+
+ /* Alias 5 */
+ #define LSR_FIR_LSA 0x00 /* FIR Line Status Address */
+ #define LSR_FRAME_ABORT 0x08 /* Frame Abort */
+ #define LSR_CRC_ERROR 0x10 /* CRC Error */
+ #define LSR_SIZE_ERROR 0x20 /* Size Error */
+ #define LSR_FRAME_ERROR 0x40 /* Frame Error */
+ #define LSR_FIFO_UR 0x80 /* FIFO Underrun */
+ #define LSR_FIFO_OR 0x80 /* FIFO Overrun */
+
+ /* Alias 6 */
+ #define BSR_FIFO_NOT_EMPTY 0x80 /* FIFO Not Empty */
+
+/* Bank 1 */
+#define FIR_CR 0x00 /* Alias 0, FIR Configuration Register (R/W) */
+#define FIR_FIFO_TR 0x01 /* Alias 1, FIR FIFO Threshold Register (R/W) */
+#define FIR_DMA_TR 0x02 /* Alias 2, FIR DMA Threshold Register (R/W) */
+#define FIR_TIMER_IIR 0x03 /* Alias 3, FIR Timer interrupt interval register
+(W/O) */
+#define FIR_FIFO_FR 0x03 /* Alias 3, FIR FIFO Flag register (R/O) */
+#define FIR_FIFO_RAR 0x04 /* Alias 4, FIR FIFO Read Address register (R/O) */
+#define FIR_FIFO_WAR 0x05 /* Alias 5, FIR FIFO Write Address register (R/O) */
+#define FIR_TR 0x06 /* Alias 6, Test REgister (W/O) */
+
+ /* Alias 0 */
+ #define CR_DMA_EN 0x01 /* DMA Enable */
+ #define CR_DMA_BURST 0x02 /* DMA Burst Mode */
+ #define CR_TIMER_EN 0x08 /* Timer Enable */
+
+ /* Alias 3 */
+ #define TIMER_IIR_500 0x00 /* 500 us */
+ #define TIMER_IIR_1ms 0x01 /* 1 ms */
+ #define TIMER_IIR_2ms 0x02 /* 2 ms */
+ #define TIMER_IIR_4ms 0x03 /* 4 ms */
+
+/* Bank 2 */
+#define FIR_IRDA_CR 0x00 /* Alias 0, IrDA Control Register (R/W) */
+#define FIR_BOF_CR 0x01 /* Alias 1, BOF Count Register (R/W) */
+#define FIR_BW_CR 0x02 /* Alias 2, Brick Wall Count Register (R/W) */
+#define FIR_TX_DSR_HI 0x03 /* Alias 3, TX Data Size Register (high) (R/W) */
+#define FIR_TX_DSR_LO 0x04 /* Alias 4, TX Data Size Register (low) (R/W) */
+#define FIR_RX_DSR_HI 0x05 /* Alias 5, RX Data Size Register (high) (R/W) */
+#define FIR_RX_DSR_LO 0x06 /* Alias 6, RX Data Size Register (low) (R/W) */
+
+ /* Alias 0 */
+ #define IRDA_CR_HDLC1152 0x80 /* 1.152Mbps HDLC Select */
+ #define IRDA_CR_CRC 0X40 /* CRC Select. */
+ #define IRDA_CR_HDLC 0x20 /* HDLC select. */
+ #define IRDA_CR_HP_MODE 0x10 /* HP mode (read only) */
+ #define IRDA_CR_SD_ST 0x08 /* SD/MODE State. */
+ #define IRDA_CR_FIR_SIN 0x04 /* FIR SIN Select. */
+ #define IRDA_CR_ITTX_0 0x02 /* SOUT State. IRTX force to 0 */
+ #define IRDA_CR_ITTX_1 0x03 /* SOUT State. IRTX force to 1 */
+
+/* Bank 3 */
+#define FIR_ID_VR 0x00 /* Alias 0, FIR ID Version Register (R/O) */
+#define FIR_MODULE_CR 0x01 /* Alias 1, FIR Module Control Register (R/W) */
+#define FIR_IO_BASE_HI 0x02 /* Alias 2, FIR Higher I/O Base Address Register (R/O)
+*/
+#define FIR_IO_BASE_LO 0x03 /* Alias 3, FIR Lower I/O Base Address Register (R/O)
+*/
+#define FIR_IRQ_CR 0x04 /* Alias 4, FIR IRQ Channel Register (R/O) */
+#define FIR_DMA_CR 0x05 /* Alias 5, FIR DMA Channel Register (R/O) */
+
+struct ali_chip {
+ char *name;
+ int cfg[2];
+ unsigned char entr1;
+ unsigned char entr2;
+ unsigned char cid_index;
+ unsigned char cid_value;
+ int (*probe)(struct ali_chip *chip, chipio_t *info);
+ int (*init)(struct ali_chip *chip, chipio_t *info);
+};
+typedef struct ali_chip ali_chip_t;
+
+
+/* DMA modes needed */
+#define DMA_TX_MODE 0x08 /* Mem to I/O, ++, demand. */
+#define DMA_RX_MODE 0x04 /* I/O to mem, ++, demand. */
+
+#define MAX_TX_WINDOW 7
+#define MAX_RX_WINDOW 7
+
+#define TX_FIFO_Threshold 8
+#define RX_FIFO_Threshold 1
+#define TX_DMA_Threshold 1
+#define RX_DMA_Threshold 1
+
+/* For storing entries in the status FIFO */
+
+struct st_fifo_entry {
+ int status;
+ int len;
+};
+
+struct st_fifo {
+ struct st_fifo_entry entries[MAX_RX_WINDOW];
+ int pending_bytes;
+ int head;
+ int tail;
+ int len;
+};
+
+struct frame_cb {
+ void *start; /* Start of frame in DMA mem */
+ int len; /* Lenght of frame in DMA mem */
+};
+
+struct tx_fifo {
+ struct frame_cb queue[MAX_TX_WINDOW]; /* Info about frames in queue */
+ int ptr; /* Currently being sent */
+ int len; /* Lenght of queue */
+ int free; /* Next free slot */
+ void *tail; /* Next free start in DMA mem */
+};
+
+/* Private data for each instance */
+struct ali_ircc_cb {
+
+ struct st_fifo st_fifo; /* Info about received frames */
+ struct tx_fifo tx_fifo; /* Info about frames to be transmitted */
+
+ struct net_device *netdev; /* Yes! we are some kind of netdevice */
+ struct net_device_stats stats;
+
+ struct irlap_cb *irlap; /* The link layer we are binded to */
+ struct qos_info qos; /* QoS capabilities for this device */
+
+ chipio_t io; /* IrDA controller information */
+ iobuff_t tx_buff; /* Transmit buffer */
+ iobuff_t rx_buff; /* Receive buffer */
+
+ __u8 ier; /* Interrupt enable register */
+
+ __u8 InterruptID; /* Interrupt ID */
+ __u8 BusStatus; /* Bus Status */
+ __u8 LineStatus; /* Line Status */
+
+ unsigned char rcvFramesOverflow;
+
+ struct timeval stamp;
+ struct timeval now;
+
+ spinlock_t lock; /* For serializing operations */
+
+ __u32 flags; /* Interface flags */
+ __u32 new_speed;
+ int index; /* Instance index */
+
+ unsigned char fifo_opti_buf;
+
+ struct pm_dev *dev;
+};
+
+static inline void switch_bank(int iobase, int bank)
+{
+ outb(bank, iobase+FIR_MCR);
+}
+
+#endif /* ALI_IRCC_H */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
