From: Rob Herring <[email protected]>

On gcc 4.7, we will get alignment traps in the ip stack if we don't align
the ip headers on receive. The h/w can support this, so use ip aligned
allocations.

Cut down the unnecessary padding on the allocation. The buffer can start on
any byte alignment, but the size including the begining offset must be 8
byte aligned. So the h/w buffer size must include the NET_IP_ALIGN offset.

Thanks to Eric Dumazet for the initial patch highlighting the padding issues.

Signed-off-by: Rob Herring <[email protected]>
---
 drivers/net/ethernet/calxeda/xgmac.c |   11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/calxeda/xgmac.c 
b/drivers/net/ethernet/calxeda/xgmac.c
index 5cb10b6..3cc19c9 100644
--- a/drivers/net/ethernet/calxeda/xgmac.c
+++ b/drivers/net/ethernet/calxeda/xgmac.c
@@ -665,6 +665,7 @@ static void xgmac_rx_refill(struct xgmac_priv *priv)
 {
        struct xgmac_dma_desc *p;
        dma_addr_t paddr;
+       int bufsz = priv->dev->mtu + ETH_HLEN + ETH_FCS_LEN;
 
        while (dma_ring_space(priv->rx_head, priv->rx_tail, DMA_RX_RING_SZ) > 
1) {
                int entry = priv->rx_head;
@@ -673,13 +674,13 @@ static void xgmac_rx_refill(struct xgmac_priv *priv)
                p = priv->dma_rx + entry;
 
                if (priv->rx_skbuff[entry] == NULL) {
-                       skb = netdev_alloc_skb(priv->dev, priv->dma_buf_sz);
+                       skb = netdev_alloc_skb_ip_align(priv->dev, bufsz);
                        if (unlikely(skb == NULL))
                                break;
 
                        priv->rx_skbuff[entry] = skb;
                        paddr = dma_map_single(priv->device, skb->data,
-                                              priv->dma_buf_sz, 
DMA_FROM_DEVICE);
+                                              bufsz, DMA_FROM_DEVICE);
                        desc_set_buf_addr(p, paddr, priv->dma_buf_sz);
                }
 
@@ -703,10 +704,10 @@ static int xgmac_dma_desc_rings_init(struct net_device 
*dev)
        unsigned int bfsize;
 
        /* Set the Buffer size according to the MTU;
-        * indeed, in case of jumbo we need to bump-up the buffer sizes.
+        * The total buffer size including any IP offset must be a multiple
+        * of 8 bytes.
         */
-       bfsize = ALIGN(dev->mtu + ETH_HLEN + ETH_FCS_LEN + NET_IP_ALIGN + 64,
-                      64);
+       bfsize = ALIGN(dev->mtu + ETH_HLEN + ETH_FCS_LEN + NET_IP_ALIGN, 8);
 
        netdev_dbg(priv->dev, "mtu [%d] bfsize [%d]\n", dev->mtu, bfsize);
 
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to