[1] Oops when booting kernel 2.4.3-pre1
[2] Kernel oopses just after starting kswapd
[3]
[4]
Linux nexxus.deenc.com 2.4.3-pre1 #2 Tue Jan 30 12:32:52 MST 2001 i686
unknown
Gnu C 2.95.2
Gnu make 3.79
binutils 2.10.1
util-linux 2.10r
modutils 2.4.3
e2fsprogs 1.19
PPP 2.3.10 not used
Linux C Library 2.1.3
Dynamic linker (ldd) 2.1.3
Linux C++ Library 2.8.1
Procps 2.0.6
Net-tools 1.55
Kbd 0.94
Sh-utils 2.0
Modules Loaded None at oops time
[5]
ksymoops 2.3.5 on i686 2.4.1. Options used
-v /usr/src/linux/vmlinux (specified)
-K (specified)
-l /proc/modules (default)
-o /lib/modules/2.4.1/ (default)
-m /boot/System.map-2.4.3-pre1 (specified)
No modules in ksyms, skipping objects
No ksyms, skipping lsmod
Unable to handle kernel NULL pointer dereference at virtual address
00000004
c0142a52
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c0142a52>]
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010286
eax: 00000000 ebx: 00000000 ecx: 00000000 edx: 00000000
esi: c12ef840 edi: c12f1e28 ebp: c122e800 esp: c122bf18
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 1, stackpage=c122b000)
Stack: 00000000 c12f1e28 00000001 c122e800 c0142ca6 c122e800 00000001
c12f1e28
00000000 00000000 c0200d80 c122e800 00000000 c0201440 c0145f01
c122e800
00000001 00000000 00000000 c122e800 c122e800 c014601a c122e800
00000001
Call Trace: [<c0142ca6>] [<c0145f01>] [<c014601a>] [<c01349a4>]
[<c0134f7a>] [<c0107007>] [<c01074b8>]
Code: 83 78 04 00 74 10 8b 54 24 24 52 56 8b 40 04 ff d0 83 c4 08
>>EIP; c0142a52 <get_new_inode+b2/160> <=====
Trace; c0142ca6 <iget4+b6/d0>
Trace; c0145f01 <proc_get_inode+41/120>
Trace; c014601a <proc_read_super+3a/b0>
Trace; c01349a4 <read_super+104/180>
Trace; c0134f7a <kern_mount+2a/80>
Trace; c0107007 <init+7/110>
Trace; c01074b8 <kernel_thread+28/40>
Code; c0142a52 <get_new_inode+b2/160>
00000000 <_EIP>:
Code; c0142a52 <get_new_inode+b2/160> <=====
0: 83 78 04 00 cmpl $0x0,0x4(%eax) <=====
Code; c0142a56 <get_new_inode+b6/160>
4: 74 10 je 16 <_EIP+0x16> c0142a68
<get_new_inode+c8/160>
Code; c0142a58 <get_new_inode+b8/160>
6: 8b 54 24 24 mov 0x24(%esp,1),%edx
Code; c0142a5c <get_new_inode+bc/160>
a: 52 push %edx
Code; c0142a5d <get_new_inode+bd/160>
b: 56 push %esi
Code; c0142a5e <get_new_inode+be/160>
c: 8b 40 04 mov 0x4(%eax),%eax
Code; c0142a61 <get_new_inode+c1/160>
f: ff d0 call *%eax
Code; c0142a63 <get_new_inode+c3/160>
11: 83 c4 08 add $0x8,%esp
kernel panic: Attempted to kill init!
[6]
[7]
[7.2]
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 2
model name : AMD Athlon(tm) Processor
stepping : 2
cpu MHz : 751.714
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca
cmov pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow
bogomips : 1500.77
[7.5]
nexxus:/usr/src/linux# lspci -vvv
00:00.0 Host bridge: VIA Technologies, Inc. VT8371 [KX133] (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2
Command: RQ=0 SBA- AGP+ 64bit- FW- Rate=<none>
00:01.0 PCI bridge: VIA Technologies, Inc. VT8371 [PCI-PCI Bridge]
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: d4000000-d5ffffff
Prefetchable memory behind bridge: d6000000-d7ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super] (rev
22)
Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev
10) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at d000 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev
30)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686
[Apollo Super AC97/Audio] (rev 20)
Subsystem: Analog Devices: Unknown device 5340
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 9
Region 0: I/O ports at dc00 [size=256]
Region 1: I/O ports at e000 [size=4]
Region 2: I/O ports at e400 [size=4]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 SCSI storage controller: Symbios Logic Inc. (formerly NCR)
53c875 (rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (4250ns min, 16000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at e800 [size=256]
Region 1: Memory at d9001000 (32-bit, non-prefetchable)
[size=256]
Region 2: Memory at d9000000 (32-bit, non-prefetchable)
[size=4K]
Expansion ROM at <unassigned> [disabled] [size=64K]
01:00.0 VGA compatible controller: nVidia Corporation Vanta [NV6] (rev
15) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d4000000 (32-bit, non-prefetchable)
[size=16M]
Region 1: Memory at d6000000 (32-bit, prefetchable) [size=32M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=31 SBA- 64bit- FW- Rate=x1,x2
Command: RQ=31 SBA- AGP+ 64bit- FW- Rate=<none>
[7.6]
nexxus:/usr/src/linux# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ARCHIVE Model: VIPER 150 21247 Rev: -011
Type: Sequential-Access ANSI SCSI revision: 01
Host: scsi0 Channel: 00 Id: 05 Lun: 00
Vendor: TANDBERG Model: TDC 3800 Rev: =04:
Type: Sequential-Access ANSI SCSI revision: 02
[7.7]
----------VIA BusMastering IDE Configuration----------------
Driver Version: 2.1e
South Bridge: VIA vt82c686a rev 0x22
Command register: 0x7
Latency timer: 32
PCI clock: 33MHz
Master Read Cycle IRDY: 0ws
Master Write Cycle IRDY: 0ws
FIFO Output Data 1/2 Clock Advance: off
BM IDE Status Register Read Retry: on
Max DRDY Pulse Width: No limit
-----------------------Primary IDE-------Secondary IDE------
Read DMA FIFO flush: on on
End Sect. FIFO flush: on on
Prefetch Buffer: on on
Post Write Buffer: on on
FIFO size: 8 8
Threshold Prim.: 1/2 1/2
Bytes Per Sector: 512 512
Both channels togth: yes yes
-------------------drive0----drive1----drive2----drive3-----
BMDMA enabled: yes yes no no
Transfer Mode: UDMA UDMA DMA/PIO DMA/PIO
Address Setup: 30ns 30ns 90ns 60ns
Active Pulse: 90ns 90ns 300ns 90ns
Recovery Time: 30ns 30ns 300ns 60ns
Cycle Time: 30ns 60ns 600ns 150ns
Transfer Rate: 66.0MB/s 33.0MB/s 3.3MB/s 13.2MB/s
Sorry, no patch.
--- TimO
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
