On 10/24/2012 05:38 PM, Peter Zijlstra wrote:
> On Wed, 2012-10-24 at 17:25 +0800, Huacai Chen wrote:
>> We found poweroff sometimes fails on our computers, so we have the
>> lock debug options configured. Then, when we do poweroff or take a
>> cpu down via cpu-hotplug, kernel complain as below. To resove this,
>> we modify sched_ttwu_pending(), disable the local irq when acquire
>> rq->lock.
>>
>> [ 83.066406] =================================
>> [ 83.066406] [ INFO: inconsistent lock state ]
>> [ 83.066406] 3.5.0-3.lemote #428 Not tainted
>> [ 83.066406] ---------------------------------
>> [ 83.066406] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
>> [ 83.066406] migration/1/7 [HC0[0]:SC0[0]:HE1:SE1] takes:
>> [ 83.066406] (&rq->lock){?.-.-.}, at: [<ffffffff802585ac>]
>> sched_ttwu_pending+0x64/0x98
>> [ 83.066406] {IN-HARDIRQ-W} state was registered at:
>> [ 83.066406] [<ffffffff8027c9ac>] __lock_acquire+0x80c/0x1cc0
>> [ 83.066406] [<ffffffff8027e3d0>] lock_acquire+0x60/0x9c
>> [ 83.066406] [<ffffffff8074ba04>] _raw_spin_lock+0x3c/0x50
>> [ 83.066406] [<ffffffff8025a2fc>] scheduler_tick+0x48/0x178
>> [ 83.066406] [<ffffffff8023b334>] update_process_times+0x54/0x70
>> [ 83.066406] [<ffffffff80277568>] tick_handle_periodic+0x2c/0x9c
>> [ 83.066406] [<ffffffff8020a818>] c0_compare_interrupt+0x8c/0x94
>> [ 83.066406] [<ffffffff8029ec8c>] handle_irq_event_percpu+0x7c/0x248
>> [ 83.066406] [<ffffffff802a2774>] handle_percpu_irq+0x8c/0xc0
>> [ 83.066406] [<ffffffff8029e2c8>] generic_handle_irq+0x48/0x58
>> [ 83.066406] [<ffffffff80205c04>] do_IRQ+0x18/0x24
>> [ 83.066406] [<ffffffff802016e4>] mach_irq_dispatch+0xe4/0x124
>> [ 83.066406] [<ffffffff80203ca0>] ret_from_irq+0x0/0x4
>> [ 83.066406] [<ffffffff8022d114>] console_unlock+0x3e8/0x4c0
>> [ 83.066406] [<ffffffff811ff0d0>] con_init+0x370/0x398
>> [ 83.066406] [<ffffffff811fe3e0>] console_init+0x34/0x50
>> [ 83.066406] [<ffffffff811e4844>] start_kernel+0x2f8/0x4e0
>> [ 83.066406] irq event stamp: 971
>> [ 83.066406] hardirqs last enabled at (971): [<ffffffff8021c384>]
>> local_flush_tlb_all+0x134/0x17c
>> [ 83.066406] hardirqs last disabled at (970): [<ffffffff8021c298>]
>> local_flush_tlb_all+0x48/0x17c
>> [ 83.066406] softirqs last enabled at (0): [<ffffffff802298a4>]
>> copy_process+0x510/0x117c
>> [ 83.066406] softirqs last disabled at (0): [< (null)>] (null)
>> [ 83.066406]
>> [ 83.066406] other info that might help us debug this:
>> [ 83.066406] Possible unsafe locking scenario:
>> [ 83.066406]
>> [ 83.066406] CPU0
>> [ 83.066406] ----
>> [ 83.066406] lock(&rq->lock);
>> [ 83.066406] <Interrupt>
>> [ 83.066406] lock(&rq->lock);
>> [ 83.066406]
>> [ 83.066406] *** DEADLOCK ***
>> [ 83.066406]
>> [ 83.066406] no locks held by migration/1/7.
>> [ 83.066406]
>> [ 83.066406] stack backtrace:
>> [ 83.066406] Call Trace:
>> [ 83.066406] [<ffffffff80747544>] dump_stack+0x8/0x34
>> [ 83.066406] [<ffffffff8027ba04>] print_usage_bug+0x2ec/0x314
>> [ 83.066406] [<ffffffff8027be28>] mark_lock+0x3fc/0x774
>> [ 83.066406] [<ffffffff8027ca48>] __lock_acquire+0x8a8/0x1cc0
>> [ 83.066406] [<ffffffff8027e3d0>] lock_acquire+0x60/0x9c
>> [ 83.066406] [<ffffffff8074ba04>] _raw_spin_lock+0x3c/0x50
>> [ 83.066406] [<ffffffff802585ac>] sched_ttwu_pending+0x64/0x98
>> [ 83.066406] [<ffffffff80745ff4>] migration_call+0x10c/0x2e0
>> [ 83.066406] [<ffffffff80253110>] notifier_call_chain+0x44/0x94
>> [ 83.066406] [<ffffffff8022eae0>] __cpu_notify+0x30/0x5c
>> [ 83.066406] [<ffffffff8072b598>] take_cpu_down+0x5c/0x70
>> [ 83.066406] [<ffffffff80299ba4>] stop_machine_cpu_stop+0x104/0x1e8
>> [ 83.066406] [<ffffffff802997cc>] cpu_stopper_thread+0x110/0x1ac
>> [ 83.066406] [<ffffffff8024c940>] kthread+0x88/0x90
>> [ 83.066406] [<ffffffff80205ee4>] kernel_thread_helper+0x10/0x18
>
> Weird, that's from a CPU_DYING call, I thought those were with IRQs
> disabled.
>
> Look at how __stop_machine() calls the function with IRQs disabled for !
> stop_machine_initialized or !SMP. Also stop_machine_cpu_stop() seems to
> disabled interrupts, so how do we end up calling take_cpu_down() with
> IRQs enabled?
The patch is no doubt wrong...
The discuss in:
https://lkml.org/lkml/2012/7/19/164
Which also faced the issue that the timer interrupt come in after apic
was shut down, I'm not sure whether this could do help to Huacai, just
as a clue...
Regards,
Michael Wang
>
> That simply doesn't make any sense.
>
>> Signed-off-by: Huacai Chen <che...@lemote.com>
>> ---
>> kernel/sched/core.c | 5 +++--
>> 1 files changed, 3 insertions(+), 2 deletions(-)
>>
>> diff --git a/kernel/sched/core.c b/kernel/sched/core.c
>> index 36e2666..703754a 100644
>> --- a/kernel/sched/core.c
>> +++ b/kernel/sched/core.c
>> @@ -1468,9 +1468,10 @@ static void sched_ttwu_pending(void)
>> {
>> struct rq *rq = this_rq();
>> struct llist_node *llist = llist_del_all(&rq->wake_list);
>> + unsigned long flags;
>> struct task_struct *p;
>>
>> - raw_spin_lock(&rq->lock);
>> + raw_spin_lock_irqsave(&rq->lock, flags);
>>
>> while (llist) {
>> p = llist_entry(llist, struct task_struct, wake_entry);
>> @@ -1478,7 +1479,7 @@ static void sched_ttwu_pending(void)
>> ttwu_do_activate(rq, p, 0);
>> }
>>
>> - raw_spin_unlock(&rq->lock);
>> + raw_spin_unlock_irqrestore(&rq->lock, flags);
>> }
>>
>> void scheduler_ipi(void)
>
>
> That's wrong though, you add the cost to the common case instead of the
> hardly ever ran hotplug case.
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
