Hi Rob,
Thanks for the comments.
On Fri, Oct 19, 2012 at 18:27:21, Rob Herring wrote:
> On 10/19/2012 02:06 AM, AnilKumar Ch wrote:
> > Add device tree support to matrix keypad driver and usage details
> > are added to device tree documentation. Driver was tested on AM335x
> > EVM.
> >
> > Signed-off-by: AnilKumar Ch <anilku...@ti.com>
> > ---
> > .../devicetree/bindings/input/matrix-keypad.txt | 52 ++++++++++
> > drivers/input/keyboard/matrix_keypad.c | 104
> > +++++++++++++++++++-
> > 2 files changed, 155 insertions(+), 1 deletion(-)
> > create mode 100644
> > Documentation/devicetree/bindings/input/matrix-keypad.txt
> >
> > diff --git a/Documentation/devicetree/bindings/input/matrix-keypad.txt
> > b/Documentation/devicetree/bindings/input/matrix-keypad.txt
> > new file mode 100644
> > index 0000000..50aaa6e
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/input/matrix-keypad.txt
> > @@ -0,0 +1,52 @@
> > +* GPIO driven matrix keypad device tree bindings
> > +
> > +GPIO driven matrix keypad is used to interface a SoC with a matrix keypad.
> > +The matrix keypad supports multiple row and column lines, a key can be
> > +placed at each intersection of a unique row and a unique column. The matrix
> > +keypad can sense a key-press and key-release by means of GPIO lines and
> > +report the event using GPIO interrupts to the cpu.
> > +
> > +Required Properties:
> > +- compatible: Should be "matix-keypad"
>
> How about gpio-matrix-keypad?
More meaningful, changed
>
> > +- keypad,num-row-gpios: Number of row lines connected to the keypad
> > + controller.
> > +- keypad,num-col-gpios: Number of column lines connected to the keypad
> > + controller.
>
> Isn't the number of gpios just the count of gpios listed below? So you
> don't need these props.
Removed
>
> > +- row-gpios: List of gpios used as row lines. The gpio
> > specifier
> > + for this property depends on the gpio controller to
> > + which these row lines are connected.
> > +- col-gpios: List of gpios used as column lines. The gpio
> > specifier
> > + for this property depends on the gpio controller to
> > + which these column lines are connected.
> > +
> > +Optional Properties:
> > +- linux,no-autorepeat: do no enable autorepeat feature.
> > +- linux,wakeup: use any event on keypad as wakeup event.
> > +- debounce-delay-ms: debounce interval in milliseconds
> > +- col-scan-delay-us: delay, measured in microseconds, that is needed
> > + before we can scan keypad after activating column gpio
> > +- clustered-irq: have clustered irq number
> > +- clustered-irq-flags: have clustered irq flags
>
> It's not clear what clustered means here. If I have to go read Linux
> code to understand, you are doing it wrong. Describe the h/w, not Linux
> data structs.
I have added based on pdata of the driver, I am not using these
parameters because AM335x-EVM have different interrupts for all
gpio pins.
clustered-irq: combined irq source for the whole matrix keypad,
like all gpio keys are connected to a gpio expander
>
> > +
> > +Example:
> > + matrix-keypad {
> > + compatible = "matrix-keypad";
> > + keypad,num-row-gpios = <3>;
> > + keypad,num-col-gpios = <2>;
> > + debounce-delay-ms = <5>;
> > + col-scan-delay-us = <2>;
> > +
> > + row-gpios = <&gpio2 25 0
> > + &gpio2 26 0
> > + &gpio2 27 0>;
> > +
> > + col-gpios = <&gpio2 21 0
> > + &gpio2 22 0>;
> > +
> > + linux,keymap = <0x0000008B
> > + 0x0100009E
> > + 0x02000069
> > + 0x0001006A
> > + 0x0101001C
> > + 0x0201006C>;
> > + };
> > diff --git a/drivers/input/keyboard/matrix_keypad.c
> > b/drivers/input/keyboard/matrix_keypad.c
> > index 18b7237..39e480d 100644
> > --- a/drivers/input/keyboard/matrix_keypad.c
> > +++ b/drivers/input/keyboard/matrix_keypad.c
> > @@ -23,6 +23,9 @@
> > #include <linux/gpio.h>
> > #include <linux/input/matrix_keypad.h>
> > #include <linux/slab.h>
> > +#include <linux/of.h>
> > +#include <linux/of_gpio.h>
> > +#include <linux/of_platform.h>
> >
> > struct matrix_keypad {
> > const struct matrix_keypad_platform_data *pdata;
> > @@ -394,6 +397,91 @@ static void matrix_keypad_free_gpio(struct
> > matrix_keypad *keypad)
> > gpio_free(pdata->col_gpios[i]);
> > }
> >
> > +#ifdef CONFIG_OF
> > +static
> > +struct matrix_keypad_platform_data *matrix_keypad_parse_dt(struct device
> > *dev)
> > +{
> > + struct matrix_keypad_platform_data *pdata;
> > + struct matrix_keymap_data *keymap_data;
> > + struct device_node *np = dev->of_node;
> > + struct property *prop;
> > + int key_count = 0, length, row, col;
> > + uint32_t *keymap;
> > +
> > + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
> > + if (!pdata) {
> > + dev_err(dev, "could not allocate memory for platform data\n");
> > + return NULL;
> > + }
> > +
> > + of_property_read_u32(np, "keypad,num-row-gpios", &pdata->num_row_gpios);
> > + of_property_read_u32(np, "keypad,num-col-gpios", &pdata->num_col_gpios);
> > + if (!pdata->num_row_gpios || !pdata->num_col_gpios) {
> > + dev_err(dev, "number of keypad rows/columns not specified\n");
> > + return NULL;
> > + }
> > +
> > + keymap_data = devm_kzalloc(dev, sizeof(*keymap_data), GFP_KERNEL);
> > + if (!keymap_data) {
> > + dev_err(dev, "could not allocate memory for keymap data\n");
> > + return NULL;
> > + }
> > + pdata->keymap_data = keymap_data;
> > +
> > + prop = of_find_property(np, "linux,keymap", &length);
> > + if (!prop)
> > + return NULL;
> > +
> > + key_count = length / sizeof(u32);
> > + keymap_data->keymap_size = key_count;
> > + keymap = devm_kzalloc(dev, sizeof(uint32_t) * key_count, GFP_KERNEL);
> > + if (!keymap) {
> > + dev_err(dev, "could not allocate memory for keymap\n");
> > + return NULL;
> > + }
> > + keymap_data->keymap = keymap;
> > +
> > + of_property_read_u32_array(np, "linux,keymap", keymap, key_count);
>
> Can't you use matrix_keypad_parse_of_keymap?
To use this API matrix_keypad_build_keymap() in probe should
be removed if so non-dt case have the problem.
>
> > +
> > + if (of_get_property(np, "linux,no-autorepeat", NULL))
> > + pdata->no_autorepeat = true;
> > + if (of_get_property(np, "linux,wakeup", NULL))
> > + pdata->wakeup = true;
> > + if (of_get_property(np, "gpio-activelow", NULL))
> > + pdata->active_low = true;
> > +
> > + of_property_read_u32(np, "debounce-delay-ms", &pdata->debounce_ms);
> > + of_property_read_u32(np, "col-scan-delay-us",
> > + &pdata->col_scan_delay_us);
> > + of_property_read_u32(np, "clustered-irq", &pdata->clustered_irq);
> > + of_property_read_u32(np, "clustered-irq-flags",
> > + &pdata->clustered_irq_flags);
> > +
> > + pdata->row_gpios = devm_kzalloc(dev, sizeof(unsigned int) *
> > + pdata->num_row_gpios, GFP_KERNEL);
> > + pdata->col_gpios = devm_kzalloc(dev, sizeof(unsigned int) *
> > + pdata->num_col_gpios, GFP_KERNEL);
>
> There's kind of a lot of allocations in this function. It would be good
> to combine some of them.
These are non-const aliases, so these are required.
>
> > + if (!pdata->row_gpios || !pdata->col_gpios) {
> > + dev_err(dev, "could not allocate memory for gpios\n");
> > + return NULL;
> > + }
> > +
> > + for (row = 0; row < pdata->num_row_gpios; row++)
> > + pdata->row_gpios[row] = of_get_named_gpio(np, "row-gpios", row);
> > +
> > + for (col = 0; col < pdata->num_col_gpios; col++)
> > + pdata->col_gpios[col] = of_get_named_gpio(np, "col-gpios", col);
> > +
> > + return pdata;
> > +}
> > +#else
> > +static
> > +struct matrix_keypad_platform_data *matrix_keypad_parse_dt(struct device
> > *dev)
> > +{
> > + return NULL;
> > +}
> > +#endif
> > +
> > static int __devinit matrix_keypad_probe(struct platform_device *pdev)
> > {
> > const struct matrix_keypad_platform_data *pdata;
> > @@ -404,7 +492,10 @@ static int __devinit matrix_keypad_probe(struct
> > platform_device *pdev)
> > size_t keymap_size;
> > int err;
> >
> > - pdata = pdev->dev.platform_data;
> > + if (pdev->dev.of_node)
> > + pdata = matrix_keypad_parse_dt(&pdev->dev);
> > + else
> > + pdata = pdev->dev.platform_data;
> > if (!pdata) {
> > dev_err(&pdev->dev, "no platform data defined\n");
> > return -EINVAL;
> > @@ -488,6 +579,16 @@ static int __devexit matrix_keypad_remove(struct
> > platform_device *pdev)
> > return 0;
> > }
> >
> > +#ifdef CONFIG_OF
> > +static const struct of_device_id matrix_keypad_dt_match[] = {
> > + { .compatible = "matrix-keypad" },
> > + {},
> > +};
> > +MODULE_DEVICE_TABLE(of, matrix_keypad_dt_match);
> > +#else
> > +#define matrix_keypad_dt_match NULL
> > +#endif
>
> Use of_match_ptr() and remove the #else
>
Changed.
Thanks
AnilKumar
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
