On 10/31/2012 04:55 PM, Pantelis Antoniou wrote:
> Add an IIO map interface that consumers can use.
> Also make sure the mfd device doesn't activate a driver which
> the configuration doesn't require.

Same here, two completely different changes in the same patch.

> 
> Signed-off-by: Pantelis Antoniou <pa...@antoniou-consulting.com>
> ---
>  drivers/iio/adc/ti_am335x_adc.c      | 53 
> ++++++++++++++++++++++++++++++------
>  drivers/mfd/ti_am335x_tscadc.c       | 30 ++++++++++++++------
>  include/linux/mfd/ti_am335x_tscadc.h |  8 ++----
>  3 files changed, 68 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
> index 02a43c8..d48fd79 100644
> --- a/drivers/iio/adc/ti_am335x_adc.c
> +++ b/drivers/iio/adc/ti_am335x_adc.c
> @@ -20,8 +20,9 @@
>  #include <linux/slab.h>
>  #include <linux/interrupt.h>
>  #include <linux/platform_device.h>
> -#include <linux/io.h>
>  #include <linux/iio/iio.h>
> +#include <linux/iio/machine.h>
> +#include <linux/iio/driver.h>
>  
>  #include <linux/mfd/ti_am335x_tscadc.h>
>  #include <linux/platform_data/ti_am335x_adc.h>
> @@ -29,6 +30,8 @@
>  struct tiadc_device {
>       struct ti_tscadc_dev *mfd_tscadc;
>       int channels;
> +     char *buf;

As far as I can see 'buf' is not used otherwise in this patch.

> +     struct iio_map *map;
>  };
>  
>  static unsigned int tiadc_readl(struct tiadc_device *adc, unsigned int reg)
> @@ -75,25 +78,57 @@ static void tiadc_step_config(struct tiadc_device 
> *adc_dev)
>  static int tiadc_channel_init(struct iio_dev *indio_dev, int channels)
>  {
>       struct iio_chan_spec *chan_array;
> -     int i;
> -
> -     indio_dev->num_channels = channels;
> -     chan_array = kcalloc(indio_dev->num_channels,
> -                     sizeof(struct iio_chan_spec), GFP_KERNEL);
> +     struct iio_chan_spec *chan;
> +     char *s;
> +     int i, len, size, ret;
>  
> +     size = indio_dev->num_channels * (sizeof(struct iio_chan_spec) + 6);
> +     chan_array = kzalloc(size, GFP_KERNEL);
>       if (chan_array == NULL)
>               return -ENOMEM;
>  
> -     for (i = 0; i < (indio_dev->num_channels); i++) {
> -             struct iio_chan_spec *chan = chan_array + i;
> +     /* buffer space is after the array */
> +     s = (char *)(chan_array + indio_dev->num_channels);
> +     chan = chan_array;
> +     for (i = 0; i < indio_dev->num_channels; i++, chan++, s += len + 1) {
> +
> +             len = sprintf(s, "AIN%d", i);
> +
>               chan->type = IIO_VOLTAGE;
>               chan->indexed = 1;
>               chan->channel = i;
> -             chan->info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT;
> +             chan->datasheet_name = s;

> +             chan->scan_type.sign = 'u';
> +             chan->scan_type.realbits = 12;
> +             chan->scan_type.storagebits = 32;
> +             chan->scan_type.shift = 0;

This part is another separate thing done by this patch and is not even in
the patch description.

>       }
>  
>       indio_dev->channels = chan_array;
>  
> +     size = (indio_dev->num_channels + 1) * sizeof(struct iio_map);
> +     adc_dev->map = kzalloc(size, GFP_KERNEL);
> +     if (adc_dev->map == NULL) {
> +             kfree(chan_array);
> +             return -ENOMEM;
> +     }
> +
> +     for (i = 0; i < indio_dev->num_channels; i++) {
> +             adc_dev->map[i].adc_channel_label = 
> chan_array[i].datasheet_name;
> +             adc_dev->map[i].consumer_dev_name = "any";
> +             adc_dev->map[i].consumer_channel = chan_array[i].datasheet_name;
> +     }
> +     adc_dev->map[i].adc_channel_label = NULL;
> +     adc_dev->map[i].consumer_dev_name = NULL;
> +     adc_dev->map[i].consumer_channel = NULL;
> +
> +     ret = iio_map_array_register(indio_dev, adc_dev->map);
> +     if (ret != 0) {
> +             kfree(adc_dev->map);
> +             kfree(chan_array);
> +             return -ENOMEM;
> +     }

The consumer data is supposed to be passed in by platform data, as it will
depend on the actual consumer. E.g. the consumer_dev_name has to match the
name of device which requests the channel. Same goes for the consumer
channel attribute, this is consumer specific as well.

> +
>       return indio_dev->num_channels;
>  }
>  
> diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
> index e947dd8..cbb8b70c 100644
> --- a/drivers/mfd/ti_am335x_tscadc.c
> +++ b/drivers/mfd/ti_am335x_tscadc.c
> @@ -176,26 +176,38 @@ static  int __devinit ti_tscadc_probe(struct 
> platform_device *pdev)
>       ctrl |= CNTRLREG_TSCSSENB;
>       tscadc_writel(tscadc, REG_CTRL, ctrl);
>  
> +     tscadc->used_cells = 0;
> +     tscadc->tsc_cell = -1;
> +     tscadc->adc_cell = -1;
> +
>       /* TSC Cell */
> -     cell = &tscadc->cells[TSC_CELL];
> -     cell->name = "tsc";
> -     cell->platform_data = tscadc;
> -     cell->pdata_size = sizeof(*tscadc);
> +     if (tsc_wires > 0) {
> +             tscadc->tsc_cell = tscadc->used_cells;
> +             cell = &tscadc->cells[tscadc->used_cells++];
> +             cell->name = "tsc";
> +             cell->platform_data = tscadc;
> +             cell->pdata_size = sizeof(*tscadc);
> +     }
>  
>       /* ADC Cell */
> -     cell = &tscadc->cells[ADC_CELL];
> -     cell->name = "tiadc";
> -     cell->platform_data = tscadc;
> -     cell->pdata_size = sizeof(*tscadc);
> +     if (adc_channels > 0) {
> +             tscadc->adc_cell = tscadc->used_cells;
> +             cell = &tscadc->cells[tscadc->used_cells++];
> +             cell->name = "tiadc";
> +             cell->platform_data = tscadc;
> +             cell->pdata_size = sizeof(*tscadc);
> +     }
>  
>       err = mfd_add_devices(&pdev->dev, pdev->id, tscadc->cells,
> -                     TSCADC_CELLS, NULL, 0, NULL);
> +                     tscadc->used_cells, NULL, 0, NULL);
>       if (err < 0)
>               goto err_disable_clk;
>  
>       device_init_wakeup(&pdev->dev, true);
>       platform_set_drvdata(pdev, tscadc);
>  
> +     dev_info(&pdev->dev, "Initialized OK.\n");
> +
>       return 0;
>  
>  err_disable_clk:
> diff --git a/include/linux/mfd/ti_am335x_tscadc.h 
> b/include/linux/mfd/ti_am335x_tscadc.h
> index 9624fea..50a245f 100644
> --- a/include/linux/mfd/ti_am335x_tscadc.h
> +++ b/include/linux/mfd/ti_am335x_tscadc.h
> @@ -128,11 +128,6 @@
>  
>  #define TSCADC_CELLS         2
>  
> -enum tscadc_cells {
> -     TSC_CELL,
> -     ADC_CELL,
> -};
> -
>  struct mfd_tscadc_board {
>       struct tsc_data *tsc_init;
>       struct adc_data *adc_init;
> @@ -143,6 +138,9 @@ struct ti_tscadc_dev {
>       struct regmap *regmap_tscadc;
>       void __iomem *tscadc_base;
>       int irq;
> +     int used_cells; /* 0-2 */
> +     int tsc_cell;   /* -1 if not used */
> +     int adc_cell;   /* -1 if not used */
>       struct mfd_cell cells[TSCADC_CELLS];
>  
>       /* tsc device */

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to