>I've a Super P6SBS motherboard with a builtin dual channel Adaptec 7890 >Ultra II scsi controller. I'm attaching the console grab when booting >2.4.3-pre2. The controller BIOS is configured to boot off the disk with >scsi id 0 on channel B. It looks like Doug was right to think that the functions can be presented to the device driver in reverse order. I should have a patch for you early tomorrow. -- Justin - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
- Kernel 2.4.3 and new aic7xxx Rafael E. Herrera
- Re: Kernel 2.4.3 and new aic7xxx Alan Cox
- Re: Kernel 2.4.3 and new aic7xxx Justin T. Gibbs
- Re: Kernel 2.4.3 and new aic7xxx Justin T. Gibbs
- Re: Kernel 2.4.3 and new aic7xxx Doug Ledford
- Re: Kernel 2.4.3 and new aic7xxx Justin T. Gibbs
- Re: Kernel 2.4.3 and new aic7xxx Rafael E. Herrera
- Re: Kernel 2.4.3 and new aic7xxx Justin T. Gibbs
- Re: Kernel 2.4.3 and new aic7xxx Linus Torvalds
- Re: Kernel 2.4.3 and new aic7xxx Aaron Tiensivu
- Re: Kernel 2.4.3 and new aic7x... Rafael E. Herrera
- Re: Kernel 2.4.3 and new aic7xxx Jeff Garzik
- Re: Kernel 2.4.3 and new aic7xxx Justin T. Gibbs
- Re: Kernel 2.4.3 and new aic7x... Jeff Garzik
- Re: Kernel 2.4.3 and new a... Justin T. Gibbs