Hi, I have recently been given an old 386 PC, I haven't got a hard disk for it, just a floppy and a network card, so I decided to create a boot disk for it, and then using nfs connect to one of my two pentium (which run RedHat 6.2) and work like that. I made a boot disk and with the linux 6.2 kernel and a root image, I tested on one of my pentium with the other pentium as an nfs server, it is working fine. However when i tryed it on the 386 things started to go wrong: 1- when the kernel was booting i was getting: Checking if this processor honours the WP bit even in supervisor mode... No. Kernel panic: This Kernel doesn't support CPU's with broken WP. Recompile it for a 386! In swapper task - not syncing so i recompiled the kernel as explained in Kernel Howto and enable 386 support 2- Now the kernel boot on the 386 but when i try to use mount to connect to the nfs server I get invalid operand: 000. Using strace i had a closer look to find out at what point mount was buging here is what i am getting: ..... mount("boggus:/home/export", "/mnt/temp/", "nfs", 0xc0ed0000, 0x8057660) = -1 ENOSYS mount("boggus:/home/export", "/mnt/temp/", "nfs", 0xc0ed0000, 0x8057660invalid operand: 0000 I have to say I don't know what to do now? did somebody solve that problem before? what else can i try to do to find out where the problem is comming from? thanks for any help regards Jerome - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/