On Wed, Mar 14, 2001 at 03:58:01PM -0500, Phil Edwards wrote:
> [I am not subscribed at the moment (don't ask :), so please cc me.]
>
> A few months ago there was a brief discussion about the FastTrak100 card
> and the driver that Promise provides, and just what all can (technically)
> be done. It eventually became a debate about what may (legally) be done
> with the driver, and then turned into another "what the GPL /really/
> says" thread. :-)
>
> I've just read all those messages from the archives. And I've been
> skimming the RAID-related HOWTOs at linuxdoc.org, but many seem out of date.
> One in particular starts off by saying that the stock 2.2 support is buggy,
> and that the "new" version is much improved, but requires patches and a
> rebuild, and is still alpha code. Of course, the doc saying it's alpha
> is itself a year old.
Ok, I get the feeling it may be the Software-RAID howto you're referring to
here... Let me explain why it's not updated.
Fact is, I haven't updated the document because 99% of what it says is still
the perfect truth.
Software-RAID in 2.2 is buggy and requires patching to go to the so-called
alpha versions (which the HOWTO explains are not alpha-quality but actually
quite usable).
However, 2.4 is out and doesn't need patching, and I should probably update the
howto to reflect that. But still, most of what's in the HOWTO is as correct as
it can be.
>
> The MAINTAINERS and Documentation/* files don't mention the FastTrack100
> (not surprising, it's not OSS) nor software RAID (also unsurprising,
> it's software).
FastTrack100 RAID *is* software RAID - The software is in the proprietary
drivers for the card.
But it's confusing, and Andre Hedrick has already explained this mess on
several occations here on LKML. Search the archives.
>
> So... am I just begging for pain if I try to install, say, a stock RH7
> on a machine with the FastTrak100 doing it's little RAID0/JBOD thing?
> If it requires this machine to always boot from a floppy because the driver
> cannot be linked into the kernel, well, I'm okay with that.
I don't know about the state of the FastTrak100 IDE drivers - but if you can
get that running, putting software RAID on top of that should be a simple
matter.
>
> RH7 ships with 2.2.16. Is building a new 2.2.18 kernel just going to
> shoot me in the head with this card (and Promise's proprietary driver)?
RH 2.2 kernels have "real" software RAID - stock 2.2 needs patching.
>
> What's the state of RAID in the 2.4 kernels?
Good. No patches needed - software RAID in 2.4 rocks. And 2.4 supports more
IDE controllers - but again I don't know the state of FastTrak100.
>
> I'm very leery of solutions that involve lots of patches to the 2.2.x kernel,
> because I have to have a working system in order to rebuild a kernel... and
> I would have to patch the kernel before I can install/boot the system... and
> there will be no other hard drives available in the machine; just the two
> being striped (or glued) by the FastTrak100 Card of Doom.
Use plain RedHat kernels, or patch your own :)
You can boot on software RAID - it's in the HOWTO ;)
--
................................................................
: [EMAIL PROTECTED] : And I see the elder races, :
:.........................: putrid forms of man :
: Jakob Østergaard : See him rise and claim the earth, :
: OZ9ABN : his downfall is at hand. :
:.........................:............{Konkhra}...............:
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
