---------------------- Forwarded by Robert Miciovici/Romania/ADSW/A-D on
03/15/2001 12:42 AM ---------------------------
Robert Miciovici
03/14/2001 11:11 PM
To: "ServeRAID For Linux" <[EMAIL PROTECTED]>
cc:
Subject: Re: IBM ServerRAID 4L firmware 4.40.03 (Document link: Robert
Miciovici)
Hi,
Look what I can provide as further info about my failure to install RH7 on
the Netfinity 5100 with the ServerRAID 4L controller:
I boot in "expert text" mode from the original bootable CD created after
the iso image available on ftp.redhat.com/
and of course I have the IBM ServerRAID for driver for Linux diskette in
the floppy drive
look what I get on one of the installation log screens:
* Cannot find /tmp/drivers/rhdd-6.1; bad driver disk
* Cannot find /tmp/drivers/modinfo; bad driver disk
* Cannot find /tmp/drivers/modules.dep; bad driver disk
* Cannot find /tmp/drivers/pcitable; bad driver disk
and
* trying to mount device /tmp/fd0
* going to insmod ips.o (path is NULL)
/tmp/ips.o: init_module: %m
Hint: this error can be caused by incorrect module parameters, including
invalid IO or IRQ parameters
I also tried mounting the driver floppy and insert the module manually but
I couldn't even mount the floppy in the shell provided by the RH 7.0
install...
Oddly I can install RedHat 6.2 with the same driver diskette on the same
machine anytime.
What do you say, how should I approach this one?
Please help me.
Best regards,
Robert
"ServeRAID For Linux" <[EMAIL PROTECTED]> on 02/26/2001 08:00:11 PM
To: "Robert Miciovici" <[EMAIL PROTECTED]>
cc:
Subject: IBM ServerRAID 4L firmware 4.40.03
Red Hat 7 contains version 4.20 if the ips driver. It should install on a
ServeRAID 4L ( even without a driver diskette ). If you want to use the
4.50 driver diskette during install, it also works. I have installed RH 7
many times using the current ( 4.50 ) diskette and have never seen a
problem.
BTW, Keith left IBM in December.
"Robert Miciovici" <[EMAIL PROTECTED]> on 02/26/2001 12:15:00 PM
To: Keith Mitchell <[EMAIL PROTECTED]>
cc:
Subject: IBM ServerRAID 4L firmware 4.40.03
Hi Keith,
I know that you are busy, and I apologise for taking up a little of your
precios time, but I would like to ask you a simple question.
How could I install RedHat 7.0 on a Netfinity 5100 with a IBM ServerRAID 4L
firmware 4.40.03 ?
I already tried with the latest driver diskette but it's not working, says
something like: ips module couldn't be loaded complaining about probably
some incorrect module parameters (which I didn't supply manually and I
don't know what should I).
Btw: RedHat 6.2 installs like a charm with the same drivers diskette.
Thank you,
Best regards,
Robert
DISCLAIMER: This e-mail contains proprietary information some or all
of which may be legally privileged. It is for the intended recipient
only. If an addressing or transmission error has misdirected this
e-mail, please notify the author by replying to this e-mail. If you
are not the intended recipient you must not use, disclose, distribute,
copy, print, or rely on this e-mail.
This message has been scanned for the presence of computer viruses.
This message has been scanned for the presence of computer viruses.
----------------------------------------------------------------------
DISCLAIMER: This e-mail contains proprietary information some or all
of which may be legally privileged. It is for the intended recipient
only. If an addressing or transmission error has misdirected this
e-mail, please notify the author by replying to this e-mail. If you
are not the intended recipient you must not use, disclose, distribute,
copy, print, or rely on this e-mail.
Please note that users should have no expectation that any
information they transmit or receive over Allied Domecq facilities
or stored on Allied Domecq computers is or will remain private, and
Allied Domecq reserves the right to review these records. Allied
Domecq reserves the right to intercept, monitor and record this e-mail.
This message has been scanned for the presence of computer viruses.
-----------------------------------------------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
