On Thu, 15 Nov 2012, Lee Jones wrote: > GPIO numbers for the newly created gpio-regulator will differ from > board to board. Therefore it's not sensible to leave this information > in the top level DTSI file. Let's move them out to the DTS files > where they can correctly vary. > > Signed-off-by: Lee Jones <[email protected]> > --- > arch/arm/boot/dts/dbx5x0.dtsi | 2 -- > arch/arm/boot/dts/hrefprev60.dts | 7 +++++++ > 2 files changed, 7 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi > index d8ba489..9f55363 100644 > --- a/arch/arm/boot/dts/dbx5x0.dtsi > +++ b/arch/arm/boot/dts/dbx5x0.dtsi > @@ -638,8 +638,6 @@ > regulator-name = "mmci-reg"; > regulator-type = "voltage"; > > - gpios = <&tc3589x_gpio 18 0x4>; > - gpio-enable = <&tc3589x_gpio 17 0x4>; > states = <1800000 0x1 > 2900000 0x0>; > > diff --git a/arch/arm/boot/dts/hrefprev60.dts > b/arch/arm/boot/dts/hrefprev60.dts > index b398946..eec29c4 100644 > --- a/arch/arm/boot/dts/hrefprev60.dts > +++ b/arch/arm/boot/dts/hrefprev60.dts > @@ -37,5 +37,12 @@ > reset-gpio = <&tc3589x_gpio 13 0x4>; > }; > }; > + > + vmmci: regulator-gpio { > + gpios = <&tc3589x_gpio 18 0x4>; > + gpio-enable = <&tc3589x_gpio 17 0x4>; > + > + status = "okay"; > + }; > }; > }; > -- > 1.7.9.5
Prod for Linus. -- Lee Jones Linaro ST-Ericsson Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
