>At this point I am 100% lost. any help would be
>greatly appreciated. I am willing to do any testing
>of the system that anyone may need. Currently I have
>no working copy of linux on the sytem. My normal
>process to get running is to install slackware.
>download 2.4.2 and the latest ac patch. Compile, add
>ide=reverse to lilo, switch the hd over to the
>highpoint hpt366 controller and reboot. As soon as I
>boot corruption begins and drive will be useless
>within 10 minutes. I have also tried leaving the HD
>on the VIA82686a controller witht the same results.
>Also note I have tried IBM & MAXTOR UDMA100 drives as
>well as IBM & WD UDMA66 Drives. I have tried both 40
>& 80 pin cables on the drives.
I suggest using the 82686-based controller rather than the HPT one. Also,
try running with DMA mode disabled. Personally, I'm running fine with the
82686-based controller in DMA mode with a Seagate UDMA/66 drive. You might
also want to look at the BIOS settings, which Windows drivers might
"adjust" at runtime to saner values.
--------------------------------------------------------------
from: Jonathan "Chromatix" Morton
mail: [EMAIL PROTECTED] (not for attachments)
big-mail: [EMAIL PROTECTED]
uni-mail: [EMAIL PROTECTED]
The key to knowledge is not to rely on people to teach you it.
Get VNC Server for Macintosh from http://www.chromatix.uklinux.net/vnc/
-----BEGIN GEEK CODE BLOCK-----
Version 3.12
GCS$/E/S dpu(!) s:- a20 C+++ UL++ P L+++ E W+ N- o? K? w--- O-- M++$ V? PS
PE- Y+ PGP++ t- 5- X- R !tv b++ DI+++ D G e+ h+ r++ y+(*)
-----END GEEK CODE BLOCK-----
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
