On 2012-11-27 08:38, Jens Axboe wrote:
> On 2012-11-27 06:57, Jeff Chua wrote:
>> On Sun, Nov 25, 2012 at 7:23 AM, Jeff Chua <jeff.chua.li...@gmail.com> wrote:
>>> On Sun, Nov 25, 2012 at 5:09 AM, Mikulas Patocka <mpato...@redhat.com>
>>> wrote:
>>>> So it's better to slow down mount.
>>>
>>> I am quite proud of the linux boot time pitting against other OS. Even
>>> with 10 partitions. Linux can boot up in just a few seconds, but now
>>> you're saying that we need to do this semaphore check at boot up. By
>>> doing so, it's inducing additional 4 seconds during boot up.
>>
>> By the way, I'm using a pretty fast SSD (Samsung PM830) and fast CPU
>> (2.8GHz). I wonder if those on slower hard disk or slower CPU, what
>> kind of degradation would this cause or just the same?
>
> It'd likely be the same slow down time wise, but as a percentage it
> would appear smaller on a slower disk.
>
> Could you please test Mikulas' suggestion of changing
> synchronize_sched() in include/linux/percpu-rwsem.h to
> synchronize_sched_expedited()?
>
> linux-next also has a re-write of the per-cpu rw sems, out of Andrews
> tree. It would be a good data point it you could test that, too.
>
> In any case, the slow down definitely isn't acceptable. Fixing an
> obscure issue like block sizes changing while O_DIRECT is in flight
> definitely does NOT warrant a mount slow down.
Here's Olegs patch, might be easier for you than switching to
linux-next. Please try that.
From: Oleg Nesterov <o...@redhat.com>
Subject: percpu_rw_semaphore: reimplement to not block the readers unnecessarily
Currently the writer does msleep() plus synchronize_sched() 3 times to
acquire/release the semaphore, and during this time the readers are
blocked completely. Even if the "write" section was not actually started
or if it was already finished.
With this patch down_write/up_write does synchronize_sched() twice and
down_read/up_read are still possible during this time, just they use the
slow path.
percpu_down_write() first forces the readers to use rw_semaphore and
increment the "slow" counter to take the lock for reading, then it
takes that rw_semaphore for writing and blocks the readers.
Also. With this patch the code relies on the documented behaviour of
synchronize_sched(), it doesn't try to pair synchronize_sched() with
barrier.
Signed-off-by: Oleg Nesterov <o...@redhat.com>
Reviewed-by: Paul E. McKenney <paul...@linux.vnet.ibm.com>
Cc: Linus Torvalds <torva...@linux-foundation.org>
Cc: Mikulas Patocka <mpato...@redhat.com>
Cc: Peter Zijlstra <pet...@infradead.org>
Cc: Ingo Molnar <mi...@elte.hu>
Cc: Srikar Dronamraju <sri...@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ana...@in.ibm.com>
Cc: Anton Arapov <an...@redhat.com>
Cc: Jens Axboe <ax...@kernel.dk>
Signed-off-by: Andrew Morton <a...@linux-foundation.org>
---
include/linux/percpu-rwsem.h | 85 +++-------------------
lib/Makefile | 2
lib/percpu-rwsem.c | 123 +++++++++++++++++++++++++++++++++
3 files changed, 138 insertions(+), 72 deletions(-)
diff -puN
include/linux/percpu-rwsem.h~percpu_rw_semaphore-reimplement-to-not-block-the-readers-unnecessarily
include/linux/percpu-rwsem.h
---
a/include/linux/percpu-rwsem.h~percpu_rw_semaphore-reimplement-to-not-block-the-readers-unnecessarily
+++ a/include/linux/percpu-rwsem.h
@@ -2,82 +2,25 @@
#define _LINUX_PERCPU_RWSEM_H
#include <linux/mutex.h>
+#include <linux/rwsem.h>
#include <linux/percpu.h>
-#include <linux/rcupdate.h>
-#include <linux/delay.h>
+#include <linux/wait.h>
struct percpu_rw_semaphore {
- unsigned __percpu *counters;
- bool locked;
- struct mutex mtx;
+ unsigned int __percpu *fast_read_ctr;
+ struct mutex writer_mutex;
+ struct rw_semaphore rw_sem;
+ atomic_t slow_read_ctr;
+ wait_queue_head_t write_waitq;
};
-#define light_mb() barrier()
-#define heavy_mb() synchronize_sched()
+extern void percpu_down_read(struct percpu_rw_semaphore *);
+extern void percpu_up_read(struct percpu_rw_semaphore *);
-static inline void percpu_down_read(struct percpu_rw_semaphore *p)
-{
- rcu_read_lock_sched();
- if (unlikely(p->locked)) {
- rcu_read_unlock_sched();
- mutex_lock(&p->mtx);
- this_cpu_inc(*p->counters);
- mutex_unlock(&p->mtx);
- return;
- }
- this_cpu_inc(*p->counters);
- rcu_read_unlock_sched();
- light_mb(); /* A, between read of p->locked and read of data, paired
with D */
-}
-
-static inline void percpu_up_read(struct percpu_rw_semaphore *p)
-{
- light_mb(); /* B, between read of the data and write to p->counter,
paired with C */
- this_cpu_dec(*p->counters);
-}
-
-static inline unsigned __percpu_count(unsigned __percpu *counters)
-{
- unsigned total = 0;
- int cpu;
-
- for_each_possible_cpu(cpu)
- total += ACCESS_ONCE(*per_cpu_ptr(counters, cpu));
-
- return total;
-}
-
-static inline void percpu_down_write(struct percpu_rw_semaphore *p)
-{
- mutex_lock(&p->mtx);
- p->locked = true;
- synchronize_sched(); /* make sure that all readers exit the
rcu_read_lock_sched region */
- while (__percpu_count(p->counters))
- msleep(1);
- heavy_mb(); /* C, between read of p->counter and write to data, paired
with B */
-}
-
-static inline void percpu_up_write(struct percpu_rw_semaphore *p)
-{
- heavy_mb(); /* D, between write to data and write to p->locked, paired
with A */
- p->locked = false;
- mutex_unlock(&p->mtx);
-}
-
-static inline int percpu_init_rwsem(struct percpu_rw_semaphore *p)
-{
- p->counters = alloc_percpu(unsigned);
- if (unlikely(!p->counters))
- return -ENOMEM;
- p->locked = false;
- mutex_init(&p->mtx);
- return 0;
-}
-
-static inline void percpu_free_rwsem(struct percpu_rw_semaphore *p)
-{
- free_percpu(p->counters);
- p->counters = NULL; /* catch use after free bugs */
-}
+extern void percpu_down_write(struct percpu_rw_semaphore *);
+extern void percpu_up_write(struct percpu_rw_semaphore *);
+
+extern int percpu_init_rwsem(struct percpu_rw_semaphore *);
+extern void percpu_free_rwsem(struct percpu_rw_semaphore *);
#endif
diff -puN
lib/Makefile~percpu_rw_semaphore-reimplement-to-not-block-the-readers-unnecessarily
lib/Makefile
---
a/lib/Makefile~percpu_rw_semaphore-reimplement-to-not-block-the-readers-unnecessarily
+++ a/lib/Makefile
@@ -12,7 +12,7 @@ lib-y := ctype.o string.o vsprintf.o cmd
idr.o int_sqrt.o extable.o \
sha1.o md5.o irq_regs.o reciprocal_div.o argv_split.o \
proportions.o flex_proportions.o prio_heap.o ratelimit.o show_mem.o \
- is_single_threaded.o plist.o decompress.o earlycpio.o
+ is_single_threaded.o plist.o decompress.o earlycpio.o percpu-rwsem.o
lib-$(CONFIG_MMU) += ioremap.o
lib-$(CONFIG_SMP) += cpumask.o
diff -puN /dev/null lib/percpu-rwsem.c
--- /dev/null
+++ a/lib/percpu-rwsem.c
@@ -0,0 +1,123 @@
+#include <linux/percpu-rwsem.h>
+#include <linux/rcupdate.h>
+#include <linux/sched.h>
+
+int percpu_init_rwsem(struct percpu_rw_semaphore *brw)
+{
+ brw->fast_read_ctr = alloc_percpu(int);
+ if (unlikely(!brw->fast_read_ctr))
+ return -ENOMEM;
+
+ mutex_init(&brw->writer_mutex);
+ init_rwsem(&brw->rw_sem);
+ atomic_set(&brw->slow_read_ctr, 0);
+ init_waitqueue_head(&brw->write_waitq);
+ return 0;
+}
+
+void percpu_free_rwsem(struct percpu_rw_semaphore *brw)
+{
+ free_percpu(brw->fast_read_ctr);
+ brw->fast_read_ctr = NULL; /* catch use after free bugs */
+}
+
+static bool update_fast_ctr(struct percpu_rw_semaphore *brw, unsigned int val)
+{
+ bool success = false;
+
+ preempt_disable();
+ if (likely(!mutex_is_locked(&brw->writer_mutex))) {
+ __this_cpu_add(*brw->fast_read_ctr, val);
+ success = true;
+ }
+ preempt_enable();
+
+ return success;
+}
+
+/*
+ * Like the normal down_read() this is not recursive, the writer can
+ * come after the first percpu_down_read() and create the deadlock.
+ */
+void percpu_down_read(struct percpu_rw_semaphore *brw)
+{
+ if (likely(update_fast_ctr(brw, +1)))
+ return;
+
+ down_read(&brw->rw_sem);
+ atomic_inc(&brw->slow_read_ctr);
+ up_read(&brw->rw_sem);
+}
+
+void percpu_up_read(struct percpu_rw_semaphore *brw)
+{
+ if (likely(update_fast_ctr(brw, -1)))
+ return;
+
+ /* false-positive is possible but harmless */
+ if (atomic_dec_and_test(&brw->slow_read_ctr))
+ wake_up_all(&brw->write_waitq);
+}
+
+static int clear_fast_ctr(struct percpu_rw_semaphore *brw)
+{
+ unsigned int sum = 0;
+ int cpu;
+
+ for_each_possible_cpu(cpu) {
+ sum += per_cpu(*brw->fast_read_ctr, cpu);
+ per_cpu(*brw->fast_read_ctr, cpu) = 0;
+ }
+
+ return sum;
+}
+
+/*
+ * A writer takes ->writer_mutex to exclude other writers and to force the
+ * readers to switch to the slow mode, note the mutex_is_locked() check in
+ * update_fast_ctr().
+ *
+ * After that the readers can only inc/dec the slow ->slow_read_ctr counter,
+ * ->fast_read_ctr is stable. Once the writer moves its sum into the slow
+ * counter it represents the number of active readers.
+ *
+ * Finally the writer takes ->rw_sem for writing and blocks the new readers,
+ * then waits until the slow counter becomes zero.
+ */
+void percpu_down_write(struct percpu_rw_semaphore *brw)
+{
+ /* also blocks update_fast_ctr() which checks mutex_is_locked() */
+ mutex_lock(&brw->writer_mutex);
+
+ /*
+ * 1. Ensures mutex_is_locked() is visible to any down_read/up_read
+ * so that update_fast_ctr() can't succeed.
+ *
+ * 2. Ensures we see the result of every previous this_cpu_add() in
+ * update_fast_ctr().
+ *
+ * 3. Ensures that if any reader has exited its critical section via
+ * fast-path, it executes a full memory barrier before we return.
+ */
+ synchronize_sched();
+
+ /* nobody can use fast_read_ctr, move its sum into slow_read_ctr */
+ atomic_add(clear_fast_ctr(brw), &brw->slow_read_ctr);
+
+ /* block the new readers completely */
+ down_write(&brw->rw_sem);
+
+ /* wait for all readers to complete their percpu_up_read() */
+ wait_event(brw->write_waitq, !atomic_read(&brw->slow_read_ctr));
+}
+
+void percpu_up_write(struct percpu_rw_semaphore *brw)
+{
+ /* allow the new readers, but only the slow-path */
+ up_write(&brw->rw_sem);
+
+ /* insert the barrier before the next fast-path in down_read */
+ synchronize_sched();
+
+ mutex_unlock(&brw->writer_mutex);
+}
--
Jens Axboe
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
