This driver can be converted to use linear_min_sel and
regulator_[map|list]_voltage_linear.
Below shows the equation (from Datasheet) for each LDOs.
For AUTOOUT:
VO(prog) = 0.625 + auto_out x 0.025 V; e.g.
(00000000 to 00101110: reserved)
00101111: 1.8 V (min)
01010011: 2.7 V
01101010: 3.275 V
01101011: 3.300 V
01101100: 3.325 V
01111111 : 3.800 V (max)
The linear mapping start from 0x2f selector.
Thus we convert this equation to:
VO(prog) = 1.8 + (selector - linear_min_sel) x 0.025 V
(min_uV = 1800000, uV_step = 25000, linear_min_sel = 0x2f)
For DOWNxOUT:
VO(prog) = 0.625 + downx_out x 0.025 V; e.g.
00000000 : 0.625 V (min)
00010111 : 1.200 V
00101111 : 1.800 V
01011111 : 3.000 V (max)
For xLDOOUT:
VO(prog) = 0.9 + xldo_out x 0.1 V; e.g.
00000: 0.9 V
00001: 1.0 V
11000 : 3.3 V
11011 : 3.6 V
Signed-off-by: Axel Lin <axel....@ingics.com>
---
Seems directly copy paste from the datasheet(pdf) adds some UTF-8 characters in
the patch.
Fix it and resend.
Axel
drivers/regulator/pcf50633-regulator.c | 176 +++++---------------------------
1 file changed, 28 insertions(+), 148 deletions(-)
diff --git a/drivers/regulator/pcf50633-regulator.c
b/drivers/regulator/pcf50633-regulator.c
index d776f51..534075e 100644
--- a/drivers/regulator/pcf50633-regulator.c
+++ b/drivers/regulator/pcf50633-regulator.c
@@ -24,12 +24,15 @@
#include <linux/mfd/pcf50633/core.h>
#include <linux/mfd/pcf50633/pmic.h>
-#define PCF50633_REGULATOR(_name, _id, _n) \
+#define PCF50633_REGULATOR(_name, _id, _min_uV, _uV_step, _min_sel, _n) \
{ \
.name = _name, \
.id = PCF50633_REGULATOR_##_id, \
.ops = &pcf50633_regulator_ops, \
.n_voltages = _n, \
+ .min_uV = _min_uV, \
+ .uV_step = _uV_step, \
+ .linear_min_sel = _min_sel, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.vsel_reg = PCF50633_REG_##_id##OUT, \
@@ -38,162 +41,39 @@
.enable_mask = PCF50633_REGULATOR_ON, \
}
-/* Bits from voltage value */
-static u8 auto_voltage_bits(unsigned int millivolts)
-{
- if (millivolts < 1800)
- return 0x2f;
- if (millivolts > 3800)
- return 0xff;
-
- millivolts -= 625;
-
- return millivolts / 25;
-}
-
-static u8 down_voltage_bits(unsigned int millivolts)
-{
- if (millivolts < 625)
- return 0;
- else if (millivolts > 3000)
- return 0xff;
-
- millivolts -= 625;
-
- return millivolts / 25;
-}
-
-static u8 ldo_voltage_bits(unsigned int millivolts)
-{
- if (millivolts < 900)
- return 0;
- else if (millivolts > 3600)
- return 0x1f;
-
- millivolts -= 900;
- return millivolts / 100;
-}
-
-/* Obtain voltage value from bits */
-static unsigned int auto_voltage_value(u8 bits)
-{
- /* AUTOOUT: 00000000 to 00101110 are reserved.
- * Return 0 for bits in reserved range, which means this selector code
- * can't be used on this system */
- if (bits < 0x2f)
- return 0;
-
- return 625 + (bits * 25);
-}
-
-
-static unsigned int down_voltage_value(u8 bits)
-{
- return 625 + (bits * 25);
-}
-
-
-static unsigned int ldo_voltage_value(u8 bits)
-{
- bits &= 0x1f;
-
- return 900 + (bits * 100);
-}
-
-static int pcf50633_regulator_map_voltage(struct regulator_dev *rdev,
- int min_uV, int max_uV)
-{
- struct pcf50633 *pcf;
- int regulator_id, millivolts;
- u8 volt_bits;
-
- pcf = rdev_get_drvdata(rdev);
-
- regulator_id = rdev_get_id(rdev);
- if (regulator_id >= PCF50633_NUM_REGULATORS)
- return -EINVAL;
-
- millivolts = min_uV / 1000;
-
- switch (regulator_id) {
- case PCF50633_REGULATOR_AUTO:
- volt_bits = auto_voltage_bits(millivolts);
- break;
- case PCF50633_REGULATOR_DOWN1:
- case PCF50633_REGULATOR_DOWN2:
- volt_bits = down_voltage_bits(millivolts);
- break;
- case PCF50633_REGULATOR_LDO1:
- case PCF50633_REGULATOR_LDO2:
- case PCF50633_REGULATOR_LDO3:
- case PCF50633_REGULATOR_LDO4:
- case PCF50633_REGULATOR_LDO5:
- case PCF50633_REGULATOR_LDO6:
- case PCF50633_REGULATOR_HCLDO:
- case PCF50633_REGULATOR_MEMLDO:
- volt_bits = ldo_voltage_bits(millivolts);
- break;
- default:
- return -EINVAL;
- }
-
- return volt_bits;
-}
-
-static int pcf50633_regulator_list_voltage(struct regulator_dev *rdev,
- unsigned int index)
-{
- int regulator_id = rdev_get_id(rdev);
-
- int millivolts;
-
- switch (regulator_id) {
- case PCF50633_REGULATOR_AUTO:
- millivolts = auto_voltage_value(index);
- break;
- case PCF50633_REGULATOR_DOWN1:
- case PCF50633_REGULATOR_DOWN2:
- millivolts = down_voltage_value(index);
- break;
- case PCF50633_REGULATOR_LDO1:
- case PCF50633_REGULATOR_LDO2:
- case PCF50633_REGULATOR_LDO3:
- case PCF50633_REGULATOR_LDO4:
- case PCF50633_REGULATOR_LDO5:
- case PCF50633_REGULATOR_LDO6:
- case PCF50633_REGULATOR_HCLDO:
- case PCF50633_REGULATOR_MEMLDO:
- millivolts = ldo_voltage_value(index);
- break;
- default:
- return -EINVAL;
- }
-
- return millivolts * 1000;
-}
-
static struct regulator_ops pcf50633_regulator_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
- .list_voltage = pcf50633_regulator_list_voltage,
- .map_voltage = pcf50633_regulator_map_voltage,
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
};
static const struct regulator_desc regulators[] = {
- [PCF50633_REGULATOR_AUTO] = PCF50633_REGULATOR("auto", AUTO, 128),
- [PCF50633_REGULATOR_DOWN1] = PCF50633_REGULATOR("down1", DOWN1, 96),
- [PCF50633_REGULATOR_DOWN2] = PCF50633_REGULATOR("down2", DOWN2, 96),
- [PCF50633_REGULATOR_LDO1] = PCF50633_REGULATOR("ldo1", LDO1, 28),
- [PCF50633_REGULATOR_LDO2] = PCF50633_REGULATOR("ldo2", LDO2, 28),
- [PCF50633_REGULATOR_LDO3] = PCF50633_REGULATOR("ldo3", LDO3, 28),
- [PCF50633_REGULATOR_LDO4] = PCF50633_REGULATOR("ldo4", LDO4, 28),
- [PCF50633_REGULATOR_LDO5] = PCF50633_REGULATOR("ldo5", LDO5, 28),
- [PCF50633_REGULATOR_LDO6] = PCF50633_REGULATOR("ldo6", LDO6, 28),
- [PCF50633_REGULATOR_HCLDO] = PCF50633_REGULATOR("hcldo", HCLDO, 28),
- [PCF50633_REGULATOR_MEMLDO] = PCF50633_REGULATOR("memldo", MEMLDO, 28),
+ [PCF50633_REGULATOR_AUTO] =
+ PCF50633_REGULATOR("auto", AUTO, 1800000, 25000, 0x2f, 128),
+ [PCF50633_REGULATOR_DOWN1] =
+ PCF50633_REGULATOR("down1", DOWN1, 625000, 25000, 0, 96),
+ [PCF50633_REGULATOR_DOWN2] =
+ PCF50633_REGULATOR("down2", DOWN2, 625000, 25000, 0, 96),
+ [PCF50633_REGULATOR_LDO1] =
+ PCF50633_REGULATOR("ldo1", LDO1, 900000, 100000, 0, 28),
+ [PCF50633_REGULATOR_LDO2] =
+ PCF50633_REGULATOR("ldo2", LDO2, 900000, 100000, 0, 28),
+ [PCF50633_REGULATOR_LDO3] =
+ PCF50633_REGULATOR("ldo3", LDO3, 900000, 100000, 0, 28),
+ [PCF50633_REGULATOR_LDO4] =
+ PCF50633_REGULATOR("ldo4", LDO4, 900000, 100000, 0, 28),
+ [PCF50633_REGULATOR_LDO5] =
+ PCF50633_REGULATOR("ldo5", LDO5, 900000, 100000, 0, 28),
+ [PCF50633_REGULATOR_LDO6] =
+ PCF50633_REGULATOR("ldo6", LDO6, 900000, 100000, 0, 28),
+ [PCF50633_REGULATOR_HCLDO] =
+ PCF50633_REGULATOR("hcldo", HCLDO, 900000, 100000, 0, 28),
+ [PCF50633_REGULATOR_MEMLDO] =
+ PCF50633_REGULATOR("memldo", MEMLDO, 900000, 100000, 0, 28),
};
static int pcf50633_regulator_probe(struct platform_device *pdev)
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
