> From: Andree Leidenfrost <[EMAIL PROTECTED]>
> To: Pete Zaitcev <[EMAIL PROTECTED]>
> Cc: [EMAIL PROTECTED]
> Date: 18 Mar 2001 22:50:32 +1100
> 
> > > I am experiencing problems with a USB mouse: The machine boots, X 
> > > starts, I log on, everything works as expected. When I restart X or just 
> > > change to an alpha terminal and back to x the mouse does not work any 
> > > more.  [...]
> > > Hardware is an ASUS K7V motherboard (VIA chip set), [...]
> > > T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#= 5 Spd=1.5 MxCh= 0 

> > Unfortunately, I do not have a hardware that exibits this.
> > If would be invaluable someone enabled
> > dbg() in devices/usb/hub.c only, [...]

> > ....................  [cable pulled, putting it back]
> > hub.c: port 1 connection change
> > hub.c: port 1, portstatus 301, change 1, 1.5 Mb/s
> > hub.c: port 1, portstatus 100, change 0, 12 Mb/s
> > hub.c: port 1 of hub 1 not enabled, trying reset again...

> Here is the output of a 2.2.18 kernel with the above patch:
> 
> ....................  [cable pulled, putting it back]
> Mar 18 22:41:53 aurich kernel: hub.c: port 3 connection change
> Mar 18 22:41:53 aurich kernel: hub.c: portstatus 301, change 1, 1.5 Mb/s
> Mar 18 22:41:54 aurich kernel: hub.c: portstatus 303, change 10, 1.5 Mb/s

The following patch reverts the code path to that of 2.2 and fixes
the condition on the Andree's box:

--- linux-2.4.2-0.1.19/drivers/usb/hub.c        Tue Mar 13 12:04:05 2001
+++ linux-2.4.2-0.1.19-p3/drivers/usb/hub.c     Mon Mar 19 12:03:42 2001
@@ -583,6 +583,12 @@
                return;
        }
 
+       /* zaitcev RHbug #23670 - 1.5Mb/s mice die when switching VCs */
+       if (portstatus & USB_PORT_STAT_LOW_SPEED) {
+               wait_ms(400);
+               delay = HUB_LONG_RESET_TIME;
+       }
+
        down(&usb_address0_sem);
 
        tempstr = kmalloc(1024, GFP_KERNEL);

I asked USB maintainers to consider it.

-- Pete
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to