Mark Hahn wrote:
>
> > > > I have an IBM DTLA 307030 (ATA 100 / UDMA 5) on an 815e board (Asus CUSL2),
>which has a PIIX4 controller.
> > > > ...
> > > > My problem is that (according to hdparm -t), I never get a better transfer
>rate than approximately 15.8 Mb/sec....
> > >
> > > 15MB/s for hdparm is about right.
>
> it's definitely not right: this disk sustains around 35 MB/s.
The 815e does not use a PIIX4 chipset. My references were to PIIX4
chipsets.
> nonsequitur: the controller and disk are both quite capable of
> sustaining 20-35 MB/s (depending on zone.) here's hdparm output
> for a disk of the same rpm and density as the DTLA's:
>
> Timing buffer-cache reads: 128 MB in 1.07 seconds =119.63 MB/sec
> Timing buffered disk reads: 64 MB in 2.02 seconds = 31.68 MB/sec
>
> (maxtor dm+45, hpt366 controller)
> regards, mark hahn.
Again, this is not a PIIX4 chipset.
rgds,
tim.
--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
