regulator_list_voltage_table() returns -EINVAL if selector >= n_voltages.
Thus we don't need to check if reg is greater than BUCK_TARGET_VOL_MAX_IDX in
lp3971_dcdc_get_voltage_sel.

BUCK_TARGET_VOL_MIN_IDX and BUCK_TARGET_VOL_MAX_IDX are not used, remove them.

Signed-off-by: Axel Lin <axel....@ingics.com>
---
 drivers/regulator/lp3971.c |   22 ++++++----------------
 1 file changed, 6 insertions(+), 16 deletions(-)

diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c
index 5f68ff1..9cb2c0f 100644
--- a/drivers/regulator/lp3971.c
+++ b/drivers/regulator/lp3971.c
@@ -73,8 +73,6 @@ static const unsigned int buck_voltage_map[] = {
 };
 
 #define BUCK_TARGET_VOL_MASK 0x3f
-#define BUCK_TARGET_VOL_MIN_IDX 0x01
-#define BUCK_TARGET_VOL_MAX_IDX 0x19
 
 #define LP3971_BUCK_RAMP_REG(x)        (buck_base_addr[x]+2)
 
@@ -140,7 +138,7 @@ static int lp3971_ldo_disable(struct regulator_dev *dev)
        return lp3971_set_bits(lp3971, LP3971_LDO_ENABLE_REG, mask, 0);
 }
 
-static int lp3971_ldo_get_voltage(struct regulator_dev *dev)
+static int lp3971_ldo_get_voltage_sel(struct regulator_dev *dev)
 {
        struct lp3971 *lp3971 = rdev_get_drvdata(dev);
        int ldo = rdev_get_id(dev) - LP3971_LDO1;
@@ -149,7 +147,7 @@ static int lp3971_ldo_get_voltage(struct regulator_dev *dev)
        reg = lp3971_reg_read(lp3971, LP3971_LDO_VOL_CONTR_REG(ldo));
        val = (reg >> LDO_VOL_CONTR_SHIFT(ldo)) & LDO_VOL_CONTR_MASK;
 
-       return dev->desc->volt_table[val];
+       return val;
 }
 
 static int lp3971_ldo_set_voltage_sel(struct regulator_dev *dev,
@@ -168,7 +166,7 @@ static struct regulator_ops lp3971_ldo_ops = {
        .is_enabled = lp3971_ldo_is_enabled,
        .enable = lp3971_ldo_enable,
        .disable = lp3971_ldo_disable,
-       .get_voltage = lp3971_ldo_get_voltage,
+       .get_voltage_sel = lp3971_ldo_get_voltage_sel,
        .set_voltage_sel = lp3971_ldo_set_voltage_sel,
 };
 
@@ -201,24 +199,16 @@ static int lp3971_dcdc_disable(struct regulator_dev *dev)
        return lp3971_set_bits(lp3971, LP3971_BUCK_VOL_ENABLE_REG, mask, 0);
 }
 
-static int lp3971_dcdc_get_voltage(struct regulator_dev *dev)
+static int lp3971_dcdc_get_voltage_sel(struct regulator_dev *dev)
 {
        struct lp3971 *lp3971 = rdev_get_drvdata(dev);
        int buck = rdev_get_id(dev) - LP3971_DCDC1;
        u16 reg;
-       int val;
 
        reg = lp3971_reg_read(lp3971, LP3971_BUCK_TARGET_VOL1_REG(buck));
        reg &= BUCK_TARGET_VOL_MASK;
 
-       if (reg <= BUCK_TARGET_VOL_MAX_IDX)
-               val = buck_voltage_map[reg];
-       else {
-               val = 0;
-               dev_warn(&dev->dev, "chip reported incorrect voltage value.\n");
-       }
-
-       return val;
+       return reg;
 }
 
 static int lp3971_dcdc_set_voltage_sel(struct regulator_dev *dev,
@@ -249,7 +239,7 @@ static struct regulator_ops lp3971_dcdc_ops = {
        .is_enabled = lp3971_dcdc_is_enabled,
        .enable = lp3971_dcdc_enable,
        .disable = lp3971_dcdc_disable,
-       .get_voltage = lp3971_dcdc_get_voltage,
+       .get_voltage_sel = lp3971_dcdc_get_voltage_sel,
        .set_voltage_sel = lp3971_dcdc_set_voltage_sel,
 };
 
-- 
1.7.9.5



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to