Linus,
Please pull the latest x86-cleanups-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git
x86-cleanups-for-linus
HEAD: 28a793892296ca3367193c7a7de1714f80049fd0 x86: Fix the error of using
"const" in gen-insn-attr-x86.awk
Small cleanups.
Thanks,
Ingo
------------------>
Cong Ding (1):
x86: Fix the error of using "const" in gen-insn-attr-x86.awk
Daniel Lezcano (1):
x86: Remove dead hlt_use_halt code
Suresh Siddha (1):
x86, apic: Cleanup cfg->domain setup for legacy interrupts
arch/x86/kernel/apic/io_apic.c | 26 ++++++------------------
arch/x86/kernel/process.c | 39 +++++++++++++-----------------------
arch/x86/tools/gen-insn-attr-x86.awk | 6 +++---
3 files changed, 23 insertions(+), 48 deletions(-)
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index c265593..0c1f366 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -234,11 +234,11 @@ int __init arch_early_irq_init(void)
zalloc_cpumask_var_node(&cfg[i].old_domain, GFP_KERNEL, node);
/*
* For legacy IRQ's, start with assigning irq0 to irq15 to
- * IRQ0_VECTOR to IRQ15_VECTOR on cpu 0.
+ * IRQ0_VECTOR to IRQ15_VECTOR for all cpu's.
*/
if (i < legacy_pic->nr_legacy_irqs) {
cfg[i].vector = IRQ0_VECTOR + i;
- cpumask_set_cpu(0, cfg[i].domain);
+ cpumask_setall(cfg[i].domain);
}
}
@@ -1141,7 +1141,8 @@ __assign_irq_vector(int irq, struct irq_cfg *cfg, const
struct cpumask *mask)
* allocation for the members that are not used anymore.
*/
cpumask_andnot(cfg->old_domain, cfg->domain, tmp_mask);
- cfg->move_in_progress = 1;
+ cfg->move_in_progress =
+ cpumask_intersects(cfg->old_domain, cpu_online_mask);
cpumask_and(cfg->domain, cfg->domain, tmp_mask);
break;
}
@@ -1172,8 +1173,9 @@ next:
current_vector = vector;
current_offset = offset;
if (cfg->vector) {
- cfg->move_in_progress = 1;
cpumask_copy(cfg->old_domain, cfg->domain);
+ cfg->move_in_progress =
+ cpumask_intersects(cfg->old_domain, cpu_online_mask);
}
for_each_cpu_and(new_cpu, tmp_mask, cpu_online_mask)
per_cpu(vector_irq, new_cpu)[vector] = irq;
@@ -1241,12 +1243,6 @@ void __setup_vector_irq(int cpu)
cfg = irq_get_chip_data(irq);
if (!cfg)
continue;
- /*
- * If it is a legacy IRQ handled by the legacy PIC, this cpu
- * will be part of the irq_cfg's domain.
- */
- if (irq < legacy_pic->nr_legacy_irqs && !IO_APIC_IRQ(irq))
- cpumask_set_cpu(cpu, cfg->domain);
if (!cpumask_test_cpu(cpu, cfg->domain))
continue;
@@ -1356,16 +1352,6 @@ static void setup_ioapic_irq(unsigned int irq, struct
irq_cfg *cfg,
if (!IO_APIC_IRQ(irq))
return;
- /*
- * For legacy irqs, cfg->domain starts with cpu 0. Now that IO-APIC
- * can handle this irq and the apic driver is finialized at this point,
- * update the cfg->domain.
- */
- if (irq < legacy_pic->nr_legacy_irqs &&
- cpumask_equal(cfg->domain, cpumask_of(0)))
- apic->vector_allocation_domain(0, cfg->domain,
- apic->target_cpus());
-
if (assign_irq_vector(irq, cfg, apic->target_cpus()))
return;
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index b644e1c..2f99e31 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -306,11 +306,6 @@ void (*pm_idle)(void);
EXPORT_SYMBOL(pm_idle);
#endif
-static inline int hlt_use_halt(void)
-{
- return 1;
-}
-
#ifndef CONFIG_SMP
static inline void play_dead(void)
{
@@ -410,28 +405,22 @@ void cpu_idle(void)
*/
void default_idle(void)
{
- if (hlt_use_halt()) {
- trace_power_start_rcuidle(POWER_CSTATE, 1, smp_processor_id());
- trace_cpu_idle_rcuidle(1, smp_processor_id());
- current_thread_info()->status &= ~TS_POLLING;
- /*
- * TS_POLLING-cleared state must be visible before we
- * test NEED_RESCHED:
- */
- smp_mb();
+ trace_power_start_rcuidle(POWER_CSTATE, 1, smp_processor_id());
+ trace_cpu_idle_rcuidle(1, smp_processor_id());
+ current_thread_info()->status &= ~TS_POLLING;
+ /*
+ * TS_POLLING-cleared state must be visible before we
+ * test NEED_RESCHED:
+ */
+ smp_mb();
- if (!need_resched())
- safe_halt(); /* enables interrupts racelessly */
- else
- local_irq_enable();
- current_thread_info()->status |= TS_POLLING;
- trace_power_end_rcuidle(smp_processor_id());
- trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
- } else {
+ if (!need_resched())
+ safe_halt(); /* enables interrupts racelessly */
+ else
local_irq_enable();
- /* loop is done by the caller */
- cpu_relax();
- }
+ current_thread_info()->status |= TS_POLLING;
+ trace_power_end_rcuidle(smp_processor_id());
+ trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
}
#ifdef CONFIG_APM_MODULE
EXPORT_SYMBOL(default_idle);
diff --git a/arch/x86/tools/gen-insn-attr-x86.awk
b/arch/x86/tools/gen-insn-attr-x86.awk
index ddcf39b..e6773dc 100644
--- a/arch/x86/tools/gen-insn-attr-x86.awk
+++ b/arch/x86/tools/gen-insn-attr-x86.awk
@@ -356,7 +356,7 @@ END {
exit 1
# print escape opcode map's array
print "/* Escape opcode map array */"
- print "const insn_attr_t const *inat_escape_tables[INAT_ESC_MAX + 1]" \
+ print "const insn_attr_t * const inat_escape_tables[INAT_ESC_MAX + 1]" \
"[INAT_LSTPFX_MAX + 1] = {"
for (i = 0; i < geid; i++)
for (j = 0; j < max_lprefix; j++)
@@ -365,7 +365,7 @@ END {
print "};\n"
# print group opcode map's array
print "/* Group opcode map array */"
- print "const insn_attr_t const *inat_group_tables[INAT_GRP_MAX + 1]"\
+ print "const insn_attr_t * const inat_group_tables[INAT_GRP_MAX + 1]"\
"[INAT_LSTPFX_MAX + 1] = {"
for (i = 0; i < ggid; i++)
for (j = 0; j < max_lprefix; j++)
@@ -374,7 +374,7 @@ END {
print "};\n"
# print AVX opcode map's array
print "/* AVX opcode map array */"
- print "const insn_attr_t const *inat_avx_tables[X86_VEX_M_MAX + 1]"\
+ print "const insn_attr_t * const inat_avx_tables[X86_VEX_M_MAX + 1]"\
"[INAT_LSTPFX_MAX + 1] = {"
for (i = 0; i < gaid; i++)
for (j = 0; j < max_lprefix; j++)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
