On 12/12/2012 12:13 AM, Borislav Petkov wrote: > On Tue, Dec 11, 2012 at 08:03:01AM -0800, Arjan van de Ven wrote: >> On 12/11/2012 7:48 AM, Borislav Petkov wrote: >>> On Tue, Dec 11, 2012 at 08:10:20PM +0800, Alex Shi wrote: >>>> Another testing of parallel compress with pigz on Linus' git tree. >>>> results show we get much better performance/power with powersaving and >>>> balance policy: >>>> >>>> testing command: >>>> #pigz -k -c -p$x -r linux* &> /dev/null >>>> >>>> On a NHM EP box >>>> powersaving balance performance >>>> x = 4 166.516 /88 68 170.515 /82 71 165.283 /103 58 >>>> x = 8 173.654 /61 94 177.693 /60 93 172.31 /76 76 >>> >>> This looks funny: so "performance" is eating less watts than >>> "powersaving" and "balance" on NHM. Could it be that the average watts >>> measurements on NHM are not correct/precise..? On SNB they look as >>> expected, according to your scheme. >> >> well... it's not always beneficial to group or to spread out >> it depends on cache behavior mostly which is best > > Let me try to understand what this means: so "performance" above with > 8 threads means that those threads are spread out across more than one > socket, no? > > If so, this would mean that you have a smaller amount of tasks on each > socket, thus the smaller wattage. > > The "powersaving" method OTOH fills up the one socket up to the brim, > thus the slightly higher consumption due to all threads being occupied. >
As Arjan said we know the performance increase should be due to the cache sharing in LLC. As to power consumption value between powersaving and performance, when we burn 2 socket CPU, the cpu load is not 100%, so some LCPU still has time to go idle or to run with low frequency, that also can save some power. That's just generalise situation, as to different hardware, different CPU, they may has different tuning in CPU packages, core, uncore part etc. So as to different benchmark, the result are also different. > Is that it? > > Thanks. > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/