On Wed, 2012-12-12 at 09:57 +0800, Jianguo Wu wrote:
> On 2012/12/11 21:20, Simon Jeons wrote:
>
> > On Tue, 2012-12-11 at 20:41 +0800, Jianguo Wu wrote:
> >> On 2012/12/11 20:24, Simon Jeons wrote:
> >>
> >>> On Tue, 2012-12-11 at 11:07 +0800, Jianguo Wu wrote:
> >>>> On 2012/12/11 10:33, Tang Chen wrote:
> >>>>
> >>>>> This patch introduces a new array zone_movable_limit[] to store the
> >>>>> ZONE_MOVABLE limit from movablecore_map boot option for all nodes.
> >>>>> The function sanitize_zone_movable_limit() will find out to which
> >>>>> node the ranges in movable_map.map[] belongs, and calculates the
> >>>>> low boundary of ZONE_MOVABLE for each node.
> >>>>>
> >>>>> Signed-off-by: Tang Chen <tangc...@cn.fujitsu.com>
> >>>>> Signed-off-by: Jiang Liu <jiang....@huawei.com>
> >>>>> Reviewed-by: Wen Congyang <we...@cn.fujitsu.com>
> >>>>> Reviewed-by: Lai Jiangshan <la...@cn.fujitsu.com>
> >>>>> Tested-by: Lin Feng <linf...@cn.fujitsu.com>
> >>>>> ---
> >>>>> mm/page_alloc.c | 77
> >>>>> +++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >>>>> 1 files changed, 77 insertions(+), 0 deletions(-)
> >>>>>
> >>>>> diff --git a/mm/page_alloc.c b/mm/page_alloc.c
> >>>>> index 1c91d16..4853619 100644
> >>>>> --- a/mm/page_alloc.c
> >>>>> +++ b/mm/page_alloc.c
> >>>>> @@ -206,6 +206,7 @@ static unsigned long __meminitdata
> >>>>> arch_zone_highest_possible_pfn[MAX_NR_ZONES];
> >>>>> static unsigned long __initdata required_kernelcore;
> >>>>> static unsigned long __initdata required_movablecore;
> >>>>> static unsigned long __meminitdata zone_movable_pfn[MAX_NUMNODES];
> >>>>> +static unsigned long __meminitdata zone_movable_limit[MAX_NUMNODES];
> >>>>>
> >>>>> /* movable_zone is the "real" zone pages in ZONE_MOVABLE are taken
> >>>>> from */
> >>>>> int movable_zone;
> >>>>> @@ -4340,6 +4341,77 @@ static unsigned long __meminit
> >>>>> zone_absent_pages_in_node(int nid,
> >>>>> return __absent_pages_in_range(nid, zone_start_pfn,
> >>>>> zone_end_pfn);
> >>>>> }
> >>>>>
> >>>>> +/**
> >>>>> + * sanitize_zone_movable_limit - Sanitize the zone_movable_limit array.
> >>>>> + *
> >>>>> + * zone_movable_limit is initialized as 0. This function will try to
> >>>>> get
> >>>>> + * the first ZONE_MOVABLE pfn of each node from movablecore_map, and
> >>>>> + * assigne them to zone_movable_limit.
> >>>>> + * zone_movable_limit[nid] == 0 means no limit for the node.
> >>>>> + *
> >>>>> + * Note: Each range is represented as [start_pfn, end_pfn)
> >>>>> + */
> >>>>> +static void __meminit sanitize_zone_movable_limit(void)
> >>>>> +{
> >>>>> + int map_pos = 0, i, nid;
> >>>>> + unsigned long start_pfn, end_pfn;
> >>>>> +
> >>>>> + if (!movablecore_map.nr_map)
> >>>>> + return;
> >>>>> +
> >>>>> + /* Iterate all ranges from minimum to maximum */
> >>>>> + for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn,
> >>>>> &nid) {
> >>>>> + /*
> >>>>> + * If we have found lowest pfn of ZONE_MOVABLE of the
> >>>>> node
> >>>>> + * specified by user, just go on to check next range.
> >>>>> + */
> >>>>> + if (zone_movable_limit[nid])
> >>>>> + continue;
> >>>>> +
> >>>>> +#ifdef CONFIG_ZONE_DMA
> >>>>> + /* Skip DMA memory. */
> >>>>> + if (start_pfn <
> >>>>> arch_zone_highest_possible_pfn[ZONE_DMA])
> >>>>> + start_pfn =
> >>>>> arch_zone_highest_possible_pfn[ZONE_DMA];
> >>>>> +#endif
> >>>>> +
> >>>>> +#ifdef CONFIG_ZONE_DMA32
> >>>>> + /* Skip DMA32 memory. */
> >>>>> + if (start_pfn <
> >>>>> arch_zone_highest_possible_pfn[ZONE_DMA32])
> >>>>> + start_pfn =
> >>>>> arch_zone_highest_possible_pfn[ZONE_DMA32];
> >>>>> +#endif
> >>>>> +
> >>>>> +#ifdef CONFIG_HIGHMEM
> >>>>> + /* Skip lowmem if ZONE_MOVABLE is highmem. */
> >>>>> + if (zone_movable_is_highmem() &&
> >>>>
> >>>> Hi Tang,
> >>>>
> >>>> I think zone_movable_is_highmem() is not work correctly here.
> >>>> sanitize_zone_movable_limit
> >>>> zone_movable_is_highmem <--using movable_zone here
> >>>> find_zone_movable_pfns_for_nodes
> >>>> find_usable_zone_for_movable <--movable_zone is specified here
> >>>>
> >>>
> >>> Hi Jiangguo and Chen,
> >>>
> >>> - What's the meaning of zone_movable_is_highmem(), does it mean all zone
> >>> highmem pages are zone movable pages or ....
> >>
> >> Hi Simon,
> >>
> >> zone_movable_is_highmem() means whether zone pages in ZONE_MOVABLE are
> >> taken from
> >> highmem.
> >>
> >>> - dmesg
> >>>
> >>>> 0.000000] Zone ranges:
> >>>> [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
> >>>> [ 0.000000] Normal [mem 0x01000000-0x373fdfff]
> >>>> [ 0.000000] HighMem [mem 0x373fe000-0xb6cfffff]
> >>>> [ 0.000000] Movable zone start for each node
> >>>> [ 0.000000] Node 0: 0x97800000
> >>>
> >>> Why the start of zone movable is in the range of zone highmem, if all
> >>> the pages of zone movable are from zone highmem? If the answer is yes,
> >>
> >>> zone movable and zone highmem are in the equal status or not?
> >>
> >> The pages of zone_movable can be taken from zone_movalbe or zone_normal,
> >> if we have highmem, then zone_movable will be taken from zone_highmem,
> >> otherwise zone_movable will be taken from zone_normal.
> >>
> >> you can refer to find_usable_zone_for_movable().
> >
> > Hi Jiangguo,
> >
> > I have 8G memory, movablecore=5G, but dmesg looks strange, what
> > happended to me?
> >
>
> Hi Simon,
>
> I think you used 32bit kernel, and didn't enable CONFIG_X86_PAE, right?
> So, it can only address memory below 4G.
Thanks for you response. Enable PAE on x86 32bit kernel, 8G memory,
movablecore=6.5G
[ 0.000000] 8304MB HIGHMEM available.
[ 0.000000] 885MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 375fe000
[ 0.000000] low ram: 0 - 375fe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x375fdfff]
[ 0.000000] HighMem [mem 0x375fe000-0x3e5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0xb69cbfff]
[ 0.000000] node 0: [mem 0xb6a46000-0xb6a47fff]
[ 0.000000] node 0: [mem 0xb6b1c000-0xb6cfffff]
[ 0.000000] node 0: [mem 0x00000000-0x3e5fffff]
[ 0.000000] On node 0 totalpages: 2051391
[ 0.000000] free_area_init_node: node 0, pgdat c0c26a80, node_mem_map
f19de200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1740 pages used for memmap
[ 0.000000] Normal zone: 220466 pages, LIFO batch:31
[ 0.000000] HighMem zone: 16609 pages used for memmap
[ 0.000000] HighMem zone: 1808595 pages, LIFO batch:31
Why zone movable disappear?
>
> Thanks,
> Jianguo Wu
>
> >> [ 0.000000] Zone ranges:
> >> [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
> >> [ 0.000000] Normal [mem 0x01000000-0x373fdfff]
> >> [ 0.000000] HighMem [mem 0x373fe000-0xb6cfffff]
> >> [ 0.000000] Movable zone start for each node
> >> [ 0.000000] Node 0: 0xb7000000
> >> [ 0.000000] Early memory node ranges
> >> [ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
> >> [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
> >> [ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
> >> [ 0.000000] node 0: [mem 0x40200000-0xb69cbfff]
> >> [ 0.000000] node 0: [mem 0xb6a46000-0xb6a47fff]
> >> [ 0.000000] node 0: [mem 0xb6b1c000-0xb6cfffff]
> >> [ 0.000000] On node 0 totalpages: 748095
> >> [ 0.000000] DMA zone: 32 pages used for memmap
> >> [ 0.000000] DMA zone: 0 pages reserved
> >> [ 0.000000] DMA zone: 3949 pages, LIFO batch:0
> >> [ 0.000000] Normal zone: 1736 pages used for memmap
> >> [ 0.000000] Normal zone: 219958 pages, LIFO batch:31
> >> [ 0.000000] HighMem zone: 4083 pages used for memmap
> >> [ 0.000000] HighMem zone: 517569 pages, LIFO batch:31
> >> [ 0.000000] Movable zone: 768 pages, LIFO batch:0
> >
> >>
> >> Thanks,
> >> Jianguo Wu
> >>
> >>>
> >>>> I think Jiang Liu's patch works fine for highmem, please refer to:
> >>>> http://marc.info/?l=linux-mm&m=135476085816087&w=2
> >>>>
> >>>> Thanks,
> >>>> Jianguo Wu
> >>>>
> >>>>> + start_pfn <
> >>>>> arch_zone_lowest_possible_pfn[ZONE_HIGHMEM])
> >>>>> + start_pfn =
> >>>>> arch_zone_lowest_possible_pfn[ZONE_HIGHMEM];
> >>>>> +#endif
> >>>>> +
> >>>>> + if (start_pfn >= end_pfn)
> >>>>> + continue;
> >>>>> +
> >>>>> + while (map_pos < movablecore_map.nr_map) {
> >>>>> + if (end_pfn <=
> >>>>> movablecore_map.map[map_pos].start_pfn)
> >>>>> + break;
> >>>>> +
> >>>>> + if (start_pfn >=
> >>>>> movablecore_map.map[map_pos].end_pfn) {
> >>>>> + map_pos++;
> >>>>> + continue;
> >>>>> + }
> >>>>> +
> >>>>> + /*
> >>>>> + * The start_pfn of ZONE_MOVABLE is either the
> >>>>> minimum
> >>>>> + * pfn specified by movablecore_map, or 0,
> >>>>> which means
> >>>>> + * the node has no ZONE_MOVABLE.
> >>>>> + */
> >>>>> + zone_movable_limit[nid] = max(start_pfn,
> >>>>> +
> >>>>> movablecore_map.map[map_pos].start_pfn);
> >>>>> +
> >>>>> + break;
> >>>>> + }
> >>>>> + }
> >>>>> +}
> >>>>> +
> >>>>> #else /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
> >>>>> static inline unsigned long __meminit zone_spanned_pages_in_node(int
> >>>>> nid,
> >>>>> unsigned long zone_type,
> >>>>> @@ -4358,6 +4430,10 @@ static inline unsigned long __meminit
> >>>>> zone_absent_pages_in_node(int nid,
> >>>>> return zholes_size[zone_type];
> >>>>> }
> >>>>>
> >>>>> +static void __meminit sanitize_zone_movable_limit(void)
> >>>>> +{
> >>>>> +}
> >>>>> +
> >>>>> #endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
> >>>>>
> >>>>> static void __meminit calculate_node_totalpages(struct pglist_data
> >>>>> *pgdat,
> >>>>> @@ -4923,6 +4999,7 @@ void __init free_area_init_nodes(unsigned long
> >>>>> *max_zone_pfn)
> >>>>>
> >>>>> /* Find the PFNs that ZONE_MOVABLE begins at in each node */
> >>>>> memset(zone_movable_pfn, 0, sizeof(zone_movable_pfn));
> >>>>> + sanitize_zone_movable_limit();
> >>>>> find_zone_movable_pfns_for_nodes();
> >>>>>
> >>>>> /* Print out the zone ranges */
> >>>>
> >>>>
> >>>>
> >>>> --
> >>>> To unsubscribe, send a message with 'unsubscribe linux-mm' in
> >>>> the body to majord...@kvack.org. For more info on Linux MM,
> >>>> see: http://www.linux-mm.org/ .
> >>>> Don't email: <a href=mailto:"d...@kvack.org";> em...@kvack.org </a>
> >>>
> >>>
> >>>
> >>> .
> >>>
> >>
> >>
> >>
> >
> >
> >
> > .
> >
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
