Hi Dongjin,
On Tuesday 18 of December 2012 04:55:07 Dongjin Kim wrote:
> Adding the device node to support eMMC storage on SDCARD4 ports,
> controlled by Mobile Storage Host Controller.
>
> Signed-off-by: Dongjin Kim <tobet...@gmail.com>
> ---
> arch/arm/boot/dts/exynos4412-odroidx.dts | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts
> b/arch/arm/boot/dts/exynos4412-odroidx.dts index 3943011..fbd0b51
> 100644
> --- a/arch/arm/boot/dts/exynos4412-odroidx.dts
> +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
> @@ -73,4 +73,25 @@
> linux,default-trigger = "mmc0";
> };
> };
> +
> + mshc@12550000 {
> + num-slots = <1>;
> + supports-highspeed;
> + broken-cd;
> + fifo-depth = <0x80>;
> + card-detect-delay = <200>;
> + samsung,dw-mshc-ciu-div = <3>;
> + samsung,dw-mshc-sdr-timing = <2 3 3>;
> + samsung,dw-mshc-ddr-timing = <1 2 3>;
> +
> + slot@0 {
> + reg = <0>;
> + bus-width = <8>;
> + gpios = <&gpk0 0 3>, <&gpk0 1 3>,
> + <&gpk0 3 3>, <&gpk0 4 3>,
> + <&gpk0 5 3>, <&gpk0 6 3>,
> + <&gpk1 3 4>, <&gpk1 4 4>,
> + <&gpk1 5 4>, <&gpk1 6 4>;
What is the gpios property for in this node? Pin configuration using
legacy GPIO bindings is not supported anymore on Exynos4. Pin control
bindings must be used.
Best regards,
Tomasz Figa
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
