According to lp8755.h:
enum lp8755_mphase_config {
        MPHASE_CONF0,
        MPHASE_CONF1,
        MPHASE_CONF2,
        MPHASE_CONF3,
        MPHASE_CONF4,
        MPHASE_CONF5,
        MPHASE_CONF6,
        MPHASE_CONF7,
        MPHASE_CONF8,
        MPHASE_CONF_MAX
};

MPHASE_CONF_MAX is 9, the mask for pchip->mphase should be 0x17.
Otherwise, we cannot differentiate MPHASE_CONF0 and MPHASE_CONF8.

Signed-off-by: Axel Lin <[email protected]>
---
Hi Daniel,
I don't have the datasheet, can you check if this patch is correct?

BTW, I'm Axel, not Alex.

Regards,
Axel
 drivers/regulator/lp8755.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/lp8755.c b/drivers/regulator/lp8755.c
index 06a82e2..6d5a11d 100644
--- a/drivers/regulator/lp8755.c
+++ b/drivers/regulator/lp8755.c
@@ -301,7 +301,7 @@ static int lp8755_init_data(struct lp8755_chip *pchip)
        ret = lp8755_read(pchip, 0x3D, &regval);
        if (ret < 0)
                goto out_i2c_error;
-       pchip->mphase = regval & 0x07;
+       pchip->mphase = regval & 0x17;
 
        /* set default data based on multi-phase config */
        for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++) {
-- 
1.7.9.5



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to