On Thu, Dec 27, 2012 at 11:46 AM, anish kumar <anish198519851...@gmail.com> wrote: > On Thu, 2012-12-27 at 11:22 -0500, jonsm...@gmail.com wrote: >> On Thu, Dec 27, 2012 at 3:27 AM, Woody Wu <narkewo...@gmail.com> wrote: >> > Hi, list >> > >> > I know this might be a very basic question. But I really don't clear at >> > it. >> > >> > Can a peripheral chip that claims to be ISA or PCI device be used in a >> > ARM based embedded system? For these kind of chips, I only concern >> > about the planar kind of devices, means they are not on a dedicated >> > expansion card. >> > >> > From hardware point of view, to attach a ISA or PCI planar chip, is >> > there any requirement need to fulfill on a ARM board? >> >> See if your ARM CPU has an interface for SRAM (in addition to DRAM). >> You can use a SRAM chip select to access ISA type devices. But you may > Would you mind explaining this in detail?
The old ISA bus is very similar to modern SRAM interfaces. Address latch enable + R/W + data strobe. Not DRAM interfaces which are different. See if your CPU supports attaching SRAM and then look at the timing diagrams. You can probably make it work with some logic glue. >> need additional buffers/latches to do this. >> >> Another solution is to attach you peripherals using USB. Almost all > Connect using USB what does this mean? Find the peripheral function you are looking for in a a chip with USB device support. Most ARM CPUs have USB host support. Pick chips with on-chip PHY support. >> embedded wifi chips are attached this way. The USB connectors aren't >> required, you can route USB around on your PCB. USB hub chips are >> $0.35 if you need more ports. USB Ethernet chips are available. >> >> Other options include SPI/I2C. It is worthwhile to investigate these > Only chips which support SPI/I2C can be used but ISA/PCI is completely > orthogonal to this AFAIK. Instead of trying to hook up an ISA chip, go look for the same function in a SPI/I2C/USB chip. Almost every peripheral function is available with many interface choices. Pick one that is more compatible with your host CPU. >> serial solutions before doing a parallel solution. Parallel buses eat >> up a lot of PCB space. >> >> >> > >> > From Linux driver point of view, what are needed to support an ISA or >> > PCI driver in ARM architecture? More important, is ISA or PCI device a >> > platform device? If not, how to add these kind of devices in my board >> > definition? >> > >> > I know my question might not be reasonable enough, if I messed concepts, >> > please sort me out. >> > >> > >> > Thanks in advance. >> > >> > >> > -- >> > woody >> > I can't go back to yesterday - because I was a different person then. >> > -- >> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in >> > the body of a message to majord...@vger.kernel.org >> > More majordomo info at http://vger.kernel.org/majordomo-info.html >> > Please read the FAQ at http://www.tux.org/lkml/ >> >> >> >> -- >> Jon Smirl >> jonsm...@gmail.com >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in >> the body of a message to majord...@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> Please read the FAQ at http://www.tux.org/lkml/ > > -- Jon Smirl jonsm...@gmail.com -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
