The AB8500 Pinctrl driver uses PRCMU register addresses to
control Pinctrl related functions. For this to happen, the
Pinctrl driver needs the PRCMU base to work from. We can do
that using standard Open Firmware (of_*) function calls, but
first we need a mechanism to gain access to the PRCMU
device node. We're going to use a Phandle in this case.
Signed-off-by: Lee Jones <lee.jo...@linaro.org>
---
arch/arm/boot/dts/dbx5x0.dtsi | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index db69f3c..3381ba6 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -170,10 +170,9 @@
gpio-bank = <8>;
};
- pinctrl@80157000 {
- // This is actually the PRCMU base address
- reg = <0x80157000 0x2000>;
+ pinctrl {
compatible = "stericsson,nmk_pinctrl";
+ prcm = <&prcmu>;
};
usb@a03e0000 {
@@ -190,7 +189,7 @@
interrupts = <0 25 0x4>;
};
- prcmu@80157000 {
+ prcmu: prcmu@80157000 {
compatible = "stericsson,db8500-prcmu";
reg = <0x80157000 0x2000>;
interrupts = <0 47 0x4>;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
