The kernel allows us to specify a function call-back which will be
invoked when a system power-off request has been received. Here we
provide one which is to be used when shutting down AB8500 based
platforms.
Signed-off-by: Lee Jones <lee.jo...@linaro.org>
---
drivers/mfd/ab8500-sysctrl.c | 22 ++++++++++++++++++++++
include/linux/mfd/abx500/ab8500.h | 2 ++
2 files changed, 24 insertions(+)
diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c
index c28d4eb..799fb5e 100644
--- a/drivers/mfd/ab8500-sysctrl.c
+++ b/drivers/mfd/ab8500-sysctrl.c
@@ -7,12 +7,29 @@
#include <linux/err.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/signal.h>
#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/mfd/abx500/ab8500-sysctrl.h>
static struct device *sysctrl_dev;
+void ab8500_power_off(void)
+{
+ sigset_t old;
+ sigset_t all;
+
+ sigfillset(&all);
+
+ if (!sigprocmask(SIG_BLOCK, &all, &old)) {
+ (void)ab8500_sysctrl_set(AB8500_STW4500CTRL1,
+ AB8500_STW4500CTRL1_SWOFF |
+ AB8500_STW4500CTRL1_SWRESET4500N);
+ (void)sigprocmask(SIG_SETMASK, &old, NULL);
+ }
+}
+
static inline bool valid_bank(u8 bank)
{
return ((bank == AB8500_SYS_CTRL1_BLOCK) ||
@@ -51,7 +68,12 @@ int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value)
static int __devinit ab8500_sysctrl_probe(struct platform_device *pdev)
{
+ struct ab8500_platform_data *plat;
+
sysctrl_dev = &pdev->dev;
+ plat = dev_get_platdata(pdev->dev.parent);
+ if (plat->pm_power_off)
+ pm_power_off = ab8500_power_off;
return 0;
}
diff --git a/include/linux/mfd/abx500/ab8500.h
b/include/linux/mfd/abx500/ab8500.h
index 1491044..96840c4 100644
--- a/include/linux/mfd/abx500/ab8500.h
+++ b/include/linux/mfd/abx500/ab8500.h
@@ -274,6 +274,7 @@ struct ab8500_codec_platform_data;
/**
* struct ab8500_platform_data - AB8500 platform data
* @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used
+ * @pm_power_off: Should machine pm power off hook be registered or not
* @init: board-specific initialization after detection of ab8500
* @num_regulator_reg_init: number of regulator init registers
* @regulator_reg_init: regulator init registers
@@ -282,6 +283,7 @@ struct ab8500_codec_platform_data;
*/
struct ab8500_platform_data {
int irq_base;
+ bool pm_power_off;
void (*init) (struct ab8500 *);
int num_regulator_reg_init;
struct ab8500_regulator_reg_init *regulator_reg_init;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
