Remove the code that always enables copper/fiber autoselect,
ignoring the DIS_FC strapping pin. The default value for this
register is autoselect on anyway, and if you explicitly disable
autoselect via strapping you probably really don't want
autoselect.
Signed-off-by: Stef van Os <stef.van...@prodrive.nl>
---
drivers/net/phy/marvell.c | 9 ---------
1 files changed, 0 insertions(+), 9 deletions(-)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 5d2a3f2..22dec9c 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -353,15 +353,6 @@ static int m88e1111_config_init(struct phy_device *phydev)
int err;
int temp;
- /* Enable Fiber/Copper auto selection */
- temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
- temp &= ~MII_M1111_HWCFG_FIBER_COPPER_AUTO;
- phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
-
- temp = phy_read(phydev, MII_BMCR);
- temp |= BMCR_RESET;
- phy_write(phydev, MII_BMCR, temp);
-
if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
(phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) ||
(phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
