Since the pin controller of sunxi chips is represented as a single bank
in the driver.
Since this is neither convenient nor represented that way in the
datasheets, define a custom of_xlate function with the layout <bank pin
flag>
Signed-off-by: Maxime Ripard <maxime.rip...@free-electrons.com>
---
drivers/pinctrl/pinctrl-sunxi.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/pinctrl/pinctrl-sunxi.c b/drivers/pinctrl/pinctrl-sunxi.c
index 353f6a8..122eeca 100644
--- a/drivers/pinctrl/pinctrl-sunxi.c
+++ b/drivers/pinctrl/pinctrl-sunxi.c
@@ -1261,6 +1261,24 @@ static void sunxi_pinctrl_gpio_set(struct gpio_chip
*chip,
writel((value & DATA_PINS_MASK) << index, pctl->membase + reg);
}
+static int sunxi_pinctrl_gpio_of_xlate(struct gpio_chip *gc,
+ const struct of_phandle_args *gpiospec,
+ u32 *flags)
+{
+ int pin, base;
+
+ base = PINS_PER_BANK * gpiospec->args[0];
+ pin = base + gpiospec->args[1];
+
+ if (pin > (gc->base + gc->ngpio))
+ return -EINVAL;
+
+ if (flags)
+ *flags = gpiospec->args[2];
+
+ return pin;
+}
+
static struct gpio_chip sunxi_pinctrl_gpio_chip __devinitconst = {
.owner = THIS_MODULE,
.request = sunxi_pinctrl_gpio_request,
@@ -1269,6 +1287,8 @@ static struct gpio_chip sunxi_pinctrl_gpio_chip
__devinitconst = {
.direction_output = sunxi_pinctrl_gpio_direction_output,
.get = sunxi_pinctrl_gpio_get,
.set = sunxi_pinctrl_gpio_set,
+ .of_xlate = sunxi_pinctrl_gpio_of_xlate,
+ .of_gpio_n_cells = 3,
.can_sleep = 0,
};
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
