On Mon, Jan 28, 2013 at 21:32:13, Nori, Sekhar wrote:
> Hi Mrugesh,
>
> On 1/28/2013 1:17 PM, Mrugesh Katepallewar wrote:
> > Add RTC DT entries in da850 dts file.
> >
> > Signed-off-by: Mrugesh Katepallewar <mrugesh...@ti.com>
> > ---
> > Applies on top of v3.8-rc4 of linus tree.
> >
> > This patch is depending on
> > "ARM: davinci: da850: add interrupt-parent property in soc node"
> > https://patchwork.kernel.org/patch/2044101/
>
> > Tested on da850-evm device.
> >
> > Test Procedure:
> > date 2013.01.28-10:00:00 (usage: date[YYYY.]MM.DD-hh:mm[:ss]) hwclock
> > -w reset board and check system time.
>
> Queuing this for v3.9. The testing information above is useful and should be
> part of the changelog. I moved it there while committing.
>
> It will be nice to check the alarm functionality as well. Can you check that
> and let me know that works as well?
I tried to test RTC alarm using "rtcwake" command, however it is not working
and returning following error
"rtcwake: /dev/rtc0 not enabled for wakeup events"
This is coming because we have not registered RTC device as a wakeup source
yet.
For checking RTC alarm interrupt, I developed one simple program which opens
RTC device, set alarm and exits.
Then by entering "cat /proc/interrupts" checked RTC interrupt count.
Using above test it confirms that RTC alarm functionality is working fine.
>
> Thanks,
> Sekhar
>
Regards,
Mrugesh
N�����r��y����b�X��ǧv�^�){.n�+����{����zX����ܨ}���Ơz�&j:+v�������zZ+��+zf���h���~����i���z� �w���?�����&�)ߢf��^jǫy�m��@A�a���
0��h���i
