3.4-stable review patch. If anyone has any objections, please let me know.
------------------ From: Szymon Janc <[email protected]> commit dbccd791a3fbbdac12c33834b73beff3984988e9 upstream. After sending reset command wait for its command complete event before sending next command. Some chips sends CC event for command received before reset if reset was send before chip replied with CC. This is also required by specification that host shall not send additional HCI commands before receiving CC for reset. < HCI Command: Reset (0x03|0x0003) plen 0 [hci0] 18.404612 > HCI Event: Command Complete (0x0e) plen 4 [hci0] > 18.405850 Write Extended Inquiry Response (0x03|0x0052) ncmd 1 Status: Success (0x00) < HCI Command: Read Local Supported Features (0x04|0x0003) plen 0 [hci0] 18.406079 > HCI Event: Command Complete (0x0e) plen 4 [hci0] > 18.407864 Reset (0x03|0x0003) ncmd 1 Status: Success (0x00) < HCI Command: Read Local Supported Features (0x04|0x0003) plen 0 [hci0] 18.408062 > HCI Event: Command Complete (0x0e) plen 12 [hci0] > 18.408835 Signed-off-by: Szymon Janc <[email protected]> Acked-by: Johan Hedberg <[email protected]> Signed-off-by: Gustavo Padovan <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> --- net/bluetooth/hci_event.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -2366,7 +2366,7 @@ static inline void hci_cmd_complete_evt( if (ev->opcode != HCI_OP_NOP) del_timer(&hdev->cmd_timer); - if (ev->ncmd) { + if (ev->ncmd && !test_bit(HCI_RESET, &hdev->flags)) { atomic_set(&hdev->cmd_cnt, 1); if (!skb_queue_empty(&hdev->cmd_q)) queue_work(hdev->workqueue, &hdev->cmd_work); -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
