PATCH: ps2esdi another one

[Hal Duston]

All,

Here is my second patch for ps2esdi.  
This patch corrects/updates DMA access.  
In case my mailer mangles it, it is available at 
http://www.sound.net/projects/ps2esdi/ps2esdi-2.4.3.patch1

Thanks, and not on the list,
Hal Duston
[EMAIL PROTECTED]

Bring DMA up to date with current MCA_DMA architecture.

Use mca_dma functions and macros.
Replace cli/sti with the DMA spinlock.

--- linux-2.4.3-hdd0/drivers/block/ps2esdi.c    Tue Apr 10 00:50:26 2001
+++ linux-2.4.3-hdd1/drivers/block/ps2esdi.c    Tue Apr 10 00:51:05 2001
@@ -52,6 +52,7 @@
 #include <asm/io.h>
 #include <asm/segment.h>
 #include <asm/dma.h>
+#include <asm/mca_dma.h>
 #include <asm/uaccess.h>
 
 #define PS2ESDI_IRQ 14
@@ -657,33 +658,23 @@
 /* prepare for dma - do all the necessary setup */
 static void ps2esdi_prep_dma(char *buffer, u_short length, u_char dma_xmode)
 {
-       u_int tc;
-       
-       buffer=(char *)virt_to_bus(buffer);
-
+       unsigned long flags;
 #if 0
        printk("ps2esdi: b_wait: %p\n", &CURRENT->bh->b_wait);
 #endif
-       cli();
+       flags = claim_dma_lock();
 
-       outb(dma_arb_level | DMA_MASK_CHAN, PORT_DMA_FN);
+       mca_disable_dma(dma_arb_level);
 
-       outb(dma_arb_level | DMA_WRITE_ADDR, PORT_DMA_FN);
-       outb((u_int) buffer & (u_int) 0xff, PORT_DMA_EX);
-       outb(((u_int) buffer >> 8) & (u_int) 0xff, PORT_DMA_EX);
-       outb(((u_int) buffer >> 16) & (u_int) 0xff, PORT_DMA_EX);
+       mca_set_dma_addr(dma_arb_level, virt_to_bus(buffer));
 
-       outb(dma_arb_level | DMA_WRITE_TC, PORT_DMA_FN);
-       tc = (length * SECT_SIZE / 2) - 1;
-       outb(tc & 0xff, PORT_DMA_EX);
-       outb((tc >> 8) & 0xff, PORT_DMA_EX);
+       mca_set_dma_count(dma_arb_level, length * 512 / 2);
 
-       outb(dma_arb_level | DMA_WRITE_MODE, PORT_DMA_FN);
-       outb(dma_xmode, PORT_DMA_EX);
+       mca_set_dma_mode(dma_arb_level, dma_xmode);
 
-       outb(dma_arb_level | DMA_UNMASK_CHAN, PORT_DMA_FN);
+       mca_enable_dma(dma_arb_level);
 
-       sti();
+       release_dma_lock(flags);
 
 }                              /* prepare for dma */
 
@@ -861,7 +852,9 @@
        switch (int_ret_code & 0x0f) {
        case INT_TRANSFER_REQ:
                ps2esdi_prep_dma(CURRENT->buffer, CURRENT->current_nr_sectors,
-                   (CURRENT->cmd == READ) ? DMA_READ_16 : DMA_WRITE_16);
+                   (CURRENT->cmd == READ)
+                   ? MCA_DMA_MODE_16 | MCA_DMA_MODE_WRITE | MCA_DMA_MODE_XFER
+                   : MCA_DMA_MODE_16 | MCA_DMA_MODE_READ);
                outb(CTRL_ENABLE_DMA | CTRL_ENABLE_INTR, ESDI_CONTROL);
                ending = -1;
                break;