Fixes the following checkpatch warning:
WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...
to printk(KERN_ERR ...
Signed-off-by: Thiago Farina <tfar...@chromium.org>
---
drivers/regulator/max8998.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c
index b588f07..a57a1b1 100644
--- a/drivers/regulator/max8998.c
+++ b/drivers/regulator/max8998.c
@@ -665,14 +665,16 @@ static int max8998_pmic_probe(struct platform_device
*pdev)
gpio_is_valid(pdata->buck1_set2)) {
/* Check if SET1 is not equal to 0 */
if (!pdata->buck1_set1) {
- printk(KERN_ERR "MAX8998 SET1 GPIO defined as 0 !\n");
+ dev_err(&pdev->dev,
+ "MAX8998 SET1 GPIO defined as 0 !\n");
WARN_ON(!pdata->buck1_set1);
ret = -EIO;
goto err_out;
}
/* Check if SET2 is not equal to 0 */
if (!pdata->buck1_set2) {
- printk(KERN_ERR "MAX8998 SET2 GPIO defined as 0 !\n");
+ dev_err(&pdev->dev,
+ "MAX8998 SET2 GPIO defined as 0 !\n");
WARN_ON(!pdata->buck1_set2);
ret = -EIO;
goto err_out;
@@ -738,7 +740,8 @@ static int max8998_pmic_probe(struct platform_device *pdev)
if (gpio_is_valid(pdata->buck2_set3)) {
/* Check if SET3 is not equal to 0 */
if (!pdata->buck2_set3) {
- printk(KERN_ERR "MAX8998 SET3 GPIO defined as 0 !\n");
+ dev_err(&pdev->dev,
+ "MAX8998 SET3 GPIO defined as 0 !\n");
WARN_ON(!pdata->buck2_set3);
ret = -EIO;
goto err_out;
--
1.8.1.151.g32238ae
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
