Em Sat, 9 Mar 2013 16:46:35 +0100
Borislav Petkov <b...@alien8.de> escreveu:
> On Thu, Mar 07, 2013 at 11:02:13AM -0300, Mauro Carvalho Chehab wrote:
> > Sure. See below:
> >
> > [ 19.062902] EDAC MC: Ver: 3.0.0
> > [ 19.088757] EDAC DEBUG: edac_mc_sysfs_init: device mc created
> > [ 19.284745] AMD64 EDAC driver v3.4.0
> > [ 19.299082] EDAC amd64: DRAM ECC enabled.
> > [ 19.315960] EDAC DEBUG: amd64_nb_mce_bank_enabled_on_node: core: 0,
> > MCG_CTL: 0x3f, NB MSR is enabled
>
> ^^^^^^^
> Whoops, where did core 1 go? Strange.
>
> > [ 19.321115] EDAC DEBUG: amd64_nb_mce_bank_enabled_on_node: core: 2,
> > MCG_CTL: 0x3f, NB MSR is enabled
> > [ 19.321118] EDAC DEBUG: amd64_nb_mce_bank_enabled_on_node: core: 3,
> > MCG_CTL: 0x3f, NB MSR is enabled
> > [ 19.321120] EDAC DEBUG: amd64_nb_mce_bank_enabled_on_node: core: 4,
> > MCG_CTL: 0x3f, NB MSR is enabled
> > [ 19.321123] EDAC DEBUG: amd64_nb_mce_bank_enabled_on_node: core: 5,
> > MCG_CTL: 0x3f, NB MSR is enabled
> > [ 19.321125] EDAC DEBUG: amd64_nb_mce_bank_enabled_on_node: core: 6,
> > MCG_CTL: 0x3f, NB MSR is enabled
> > [ 19.321140] EDAC amd64: F10h detected (node 0).
> > [ 19.327072] EDAC DEBUG: reserve_mc_sibling_devs: F1: 0000:00:18.1
> > [ 19.327074] EDAC DEBUG: reserve_mc_sibling_devs: F2: 0000:00:18.2
> > [ 19.327076] EDAC DEBUG: reserve_mc_sibling_devs: F3: 0000:00:18.3
> > [ 19.327078] EDAC DEBUG: read_mc_regs: TOP_MEM: 0x00000000e0000000
> > [ 19.327081] EDAC DEBUG: read_mc_regs: TOP_MEM2: 0x0000000420000000
>
> Looks about right - 16G.
>
> > [ 19.327087] EDAC DEBUG: read_dram_ctl_register: F2x110 (DCTSelLow):
> > 0x000005e4, High range addrs at: 0x0
> > [ 19.327089] EDAC DEBUG: read_dram_ctl_register: DCTs operate in
> > unganged mode
> > [ 19.327091] EDAC DEBUG: read_dram_ctl_register: Address range split
> > per DCT: no
> > [ 19.327093] EDAC DEBUG: read_dram_ctl_register: data interleave for
> > ECC: enabled, DRAM cleared since last warm reset: yes
> > [ 19.327095] EDAC DEBUG: read_dram_ctl_register: channel interleave:
> > enabled, interleave bits selector: 0x3
> > [ 19.327099] EDAC DEBUG: read_mc_regs: DRAM range[0], base:
> > 0x0000000000000000; limit: 0x000000021fffffff
> > [ 19.327101] EDAC DEBUG: read_mc_regs: IntlvEn=Disabled; Range access:
> > RW IntlvSel=0 DstNode=0
> > [ 19.327104] EDAC DEBUG: read_mc_regs: DRAM range[1], base:
> > 0x0000000220000000; limit: 0x000000041fffffff
> > [ 19.327107] EDAC DEBUG: read_mc_regs: IntlvEn=Disabled; Range access:
> > RW IntlvSel=0 DstNode=1
> > [ 19.327114] EDAC DEBUG: read_dct_base_mask: DCSB0[0]=0x00000000 reg:
> > F2x40
> > [ 19.327117] EDAC DEBUG: read_dct_base_mask: DCSB1[0]=0x00000000 reg:
> > F2x140
> > [ 19.327119] EDAC DEBUG: read_dct_base_mask: DCSB0[1]=0x00000000 reg:
> > F2x44
> > [ 19.327121] EDAC DEBUG: read_dct_base_mask: DCSB1[1]=0x00000000 reg:
> > F2x144
> > [ 19.327123] EDAC DEBUG: read_dct_base_mask: DCSB0[2]=0x00000001 reg:
> > F2x48
> > [ 19.327125] EDAC DEBUG: read_dct_base_mask: DCSB1[2]=0x00000001 reg:
> > F2x148
> > [ 19.327129] EDAC DEBUG: read_dct_base_mask: DCSB0[3]=0x00000101 reg:
> > F2x4c
> > [ 19.327131] EDAC DEBUG: read_dct_base_mask: DCSB1[3]=0x00000101 reg:
> > F2x14c
> > [ 19.327134] EDAC DEBUG: read_dct_base_mask: DCSB0[4]=0x00000000 reg:
> > F2x50
> > [ 19.327136] EDAC DEBUG: read_dct_base_mask: DCSB1[4]=0x00000000 reg:
> > F2x150
> > [ 19.327138] EDAC DEBUG: read_dct_base_mask: DCSB0[5]=0x00000000 reg:
> > F2x54
> > [ 19.327140] EDAC DEBUG: read_dct_base_mask: DCSB1[5]=0x00000000 reg:
> > F2x154
> > [ 19.327142] EDAC DEBUG: read_dct_base_mask: DCSB0[6]=0x00000201 reg:
> > F2x58
> > [ 19.327144] EDAC DEBUG: read_dct_base_mask: DCSB1[6]=0x00000201 reg:
> > F2x158
> > [ 19.327146] EDAC DEBUG: read_dct_base_mask: DCSB0[7]=0x00000301 reg:
> > F2x5c
> > [ 19.327148] EDAC DEBUG: read_dct_base_mask: DCSB1[7]=0x00000301 reg:
> > F2x15c
> > [ 19.327150] EDAC DEBUG: read_dct_base_mask: DCSM0[0]=0x00000000 reg:
> > F2x60
> > [ 19.327152] EDAC DEBUG: read_dct_base_mask: DCSM1[0]=0x00000000 reg:
> > F2x160
> > [ 19.327155] EDAC DEBUG: read_dct_base_mask: DCSM0[1]=0x00f83ce0 reg:
> > F2x64
> > [ 19.327157] EDAC DEBUG: read_dct_base_mask: DCSM1[1]=0x00f83ce0 reg:
> > F2x164
> > [ 19.327159] EDAC DEBUG: read_dct_base_mask: DCSM0[2]=0x00000000 reg:
> > F2x68
> > [ 19.327161] EDAC DEBUG: read_dct_base_mask: DCSM1[2]=0x00000000 reg:
> > F2x168
> > [ 19.327163] EDAC DEBUG: read_dct_base_mask: DCSM0[3]=0x00f83ce0 reg:
> > F2x6c
> > [ 19.327165] EDAC DEBUG: read_dct_base_mask: DCSM1[3]=0x00f83ce0 reg:
> > F2x16c
> > [ 19.327169] EDAC DEBUG: dump_misc_regs: F3xE8 (NB Cap): 0x0200df5f
> > [ 19.327170] EDAC DEBUG: dump_misc_regs: NB two channel DRAM capable:
> > yes
> > [ 19.327172] EDAC DEBUG: dump_misc_regs: ECC capable: yes, ChipKill ECC
> > capable: yes
> > [ 19.327175] EDAC DEBUG: amd64_dump_dramcfg_low: F2x090 (DRAM Cfg Low):
> > 0x00080100
> > [ 19.327179] EDAC DEBUG: amd64_dump_dramcfg_low: DIMM type: buffered;
> > all DIMMs support ECC: yes
> > [ 19.327181] EDAC DEBUG: amd64_dump_dramcfg_low: PAR/ERR parity: enabled
> > [ 19.327183] EDAC DEBUG: amd64_dump_dramcfg_low: DCT 128bit mode width:
> > 64b
> > [ 19.327185] EDAC DEBUG: amd64_dump_dramcfg_low: x4 logical DIMMs
> > present: L0: no L1: no L2: no L3: no
> > [ 19.327187] EDAC DEBUG: dump_misc_regs: F3xB0 (Online Spare): 0x00000000
> > [ 19.327189] EDAC DEBUG: dump_misc_regs: F1xF0 (DRAM Hole Address):
> > 0xe0002003, base: 0xe0000000, offset: 0x20000000
> > [ 19.327190] EDAC DEBUG: dump_misc_regs: DramHoleValid: yes
> > [ 19.327193] EDAC DEBUG: amd64_debug_display_dimm_sizes: F2x080 (DRAM
> > Bank Address Mapping): 0x00005050
> > [ 19.327195] EDAC MC: DCT0 chip selects:
> > [ 19.327196] EDAC amd64: MC: 0: 0MB 1: 0MB
> > [ 19.333141] EDAC amd64: MC: 2: 1024MB 3: 1024MB
> > [ 19.339225] EDAC amd64: MC: 4: 0MB 5: 0MB
> > [ 19.344247] EDAC amd64: MC: 6: 1024MB 7: 1024MB
> > [ 19.348948] EDAC DEBUG: amd64_debug_display_dimm_sizes: F2x180 (DRAM
> > Bank Address Mapping): 0x00005050
> > [ 19.348949] EDAC MC: DCT1 chip selects:
> > [ 19.348954] EDAC amd64: MC: 0: 0MB 1: 0MB
> > [ 19.353656] EDAC amd64: MC: 2: 1024MB 3: 1024MB
> > [ 19.358365] EDAC amd64: MC: 4: 0MB 5: 0MB
> > [ 19.363086] EDAC amd64: MC: 6: 1024MB 7: 1024MB
> > [ 19.367799] EDAC amd64: using x8 syndromes.
> > [ 19.371996] EDAC DEBUG: amd64_dump_dramcfg_low: F2x190 (DRAM Cfg Low):
> > 0x00080100
> > [ 19.371998] EDAC DEBUG: amd64_dump_dramcfg_low: DIMM type: buffered;
> > all DIMMs support ECC: yes
> > [ 19.372003] EDAC DEBUG: amd64_dump_dramcfg_low: PAR/ERR parity: enabled
> > [ 19.372005] EDAC DEBUG: amd64_dump_dramcfg_low: DCT 128bit mode width:
> > 64b
> > [ 19.372007] EDAC DEBUG: amd64_dump_dramcfg_low: x4 logical DIMMs
> > present: L0: no L1: no L2: no L3: no
> > [ 19.372009] EDAC DEBUG: f1x_early_channel_count: Data width is not 128
> > bits - need more decoding
> > [ 19.372011] EDAC amd64: MCT channel count: 2
> > [ 19.376292] EDAC DEBUG: edac_mc_alloc: allocating 1904 bytes for mci
> > data (16 ranks, 16 csrows/channels)
> > [ 19.376323] EDAC DEBUG: init_csrows: node 0,
> > NBCFG=0x4af0005c[ChipKillEccCap: 1|DramEccEn: 1]
> > [ 19.376325] EDAC DEBUG: init_csrows: MC node: 0, csrow: 2
> > [ 19.376327] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 2, channel: 0, DBAM
> > idx: 5
> > [ 19.376329] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 262144
> > [ 19.376331] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 2, channel: 1, DBAM
> > idx: 5
> > [ 19.376333] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 262144
> > [ 19.376335] EDAC amd64: CS2: Registered DDR3 RAM
> > [ 19.380967] EDAC DEBUG: init_csrows: Total csrow2 pages: 524288
> > [ 19.380970] EDAC DEBUG: init_csrows: MC node: 0, csrow: 3
> > [ 19.380971] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 3, channel: 0, DBAM
> > idx: 5
> > [ 19.380973] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 262144
> > [ 19.380975] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 3, channel: 1, DBAM
> > idx: 5
> > [ 19.380977] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 262144
> > [ 19.380978] EDAC amd64: CS3: Registered DDR3 RAM
> > [ 19.385610] EDAC DEBUG: init_csrows: Total csrow3 pages: 524288
> > [ 19.385612] EDAC DEBUG: init_csrows: MC node: 0, csrow: 6
> > [ 19.385614] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 6, channel: 0, DBAM
> > idx: 5
> > [ 19.385615] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 262144
> > [ 19.385617] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 6, channel: 1, DBAM
> > idx: 5
> > [ 19.385619] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 262144
> > [ 19.385620] EDAC amd64: CS6: Registered DDR3 RAM
> > [ 19.390240] EDAC DEBUG: init_csrows: Total csrow6 pages: 524288
> > [ 19.390242] EDAC DEBUG: init_csrows: MC node: 0, csrow: 7
> > [ 19.390244] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 7, channel: 0, DBAM
> > idx: 5
> > [ 19.390246] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 262144
> > [ 19.390248] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 7, channel: 1, DBAM
> > idx: 5
> > [ 19.390250] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 262144
> > [ 19.390254] EDAC amd64: CS7: Registered DDR3 RAM
> > [ 19.394875] EDAC DEBUG: init_csrows: Total csrow7 pages: 524288
>
> [ … ]
>
> > [ 19.395385] EDAC MC0: Giving out device to 'amd64_edac' 'F10h': DEV
> > 0000:00:18.2
> > [ 19.402852] EDAC amd64: DRAM ECC enabled.
> > [ 19.406879] EDAC DEBUG: amd64_nb_mce_bank_enabled_on_node: core: 1,
> > MCG_CTL: 0x3f, NB MSR is enabled
>
> here's core 1, WTF? on the second node? Great.
>
> > [ 19.406882] EDAC DEBUG: amd64_nb_mce_bank_enabled_on_node: core: 7,
> > MCG_CTL: 0x3f, NB MSR is enabled
> > [ 19.406884] EDAC DEBUG: amd64_nb_mce_bank_enabled_on_node: core: 8,
> > MCG_CTL: 0x3f, NB MSR is enabled
> > [ 19.406887] EDAC DEBUG: amd64_nb_mce_bank_enabled_on_node: core: 9,
> > MCG_CTL: 0x3f, NB MSR is enabled
> > [ 19.406889] EDAC DEBUG: amd64_nb_mce_bank_enabled_on_node: core: 10,
> > MCG_CTL: 0x3f, NB MSR is enabled
> > [ 19.406891] EDAC DEBUG: amd64_nb_mce_bank_enabled_on_node: core: 11,
> > MCG_CTL: 0x3f, NB MSR is enabled
>
> [ … ]
>
> On Thu, Mar 07, 2013 at 09:57:03AM -0300, Mauro Carvalho Chehab wrote:
> > This is what the csrows nodes show:
> >
> > /sys/devices/system/edac/mc/mc0/csrow2/size_mb:2048
> > /sys/devices/system/edac/mc/mc0/csrow3/size_mb:2048
> > /sys/devices/system/edac/mc/mc0/csrow6/size_mb:2048
> > /sys/devices/system/edac/mc/mc0/csrow7/size_mb:2048
> > /sys/devices/system/edac/mc/mc1/csrow2/size_mb:2048
> > /sys/devices/system/edac/mc/mc1/csrow3/size_mb:2048
> > /sys/devices/system/edac/mc/mc1/csrow6/size_mb:2048
> > /sys/devices/system/edac/mc/mc1/csrow7/size_mb:2048
>
> This is correct.
>
> Each chip select has 1024M per DCT but since we have 2 DCTs per node,
> that's 1024M * 2 = 2G per chip select of a MC.
>
> > Total size is 16Gb, but the number of ranks are wrong.
>
> Well, chip select != rank, remember?
>
> > This is what's reported by the new API:
> >
> > /sys/devices/system/edac/mc/mc0/rank12/size:2048
> > /sys/devices/system/edac/mc/mc0/rank13/size:2048
> > /sys/devices/system/edac/mc/mc0/rank14/size:2048
> > /sys/devices/system/edac/mc/mc0/rank15/size:2048
> > /sys/devices/system/edac/mc/mc0/rank4/size:2048
> > /sys/devices/system/edac/mc/mc0/rank5/size:2048
> > /sys/devices/system/edac/mc/mc0/rank6/size:2048
> > /sys/devices/system/edac/mc/mc0/rank7/size:2048
> > /sys/devices/system/edac/mc/mc1/rank12/size:2048
> > /sys/devices/system/edac/mc/mc1/rank13/size:2048
> > /sys/devices/system/edac/mc/mc1/rank14/size:2048
> > /sys/devices/system/edac/mc/mc1/rank15/size:2048
> > /sys/devices/system/edac/mc/mc1/rank4/size:2048
> > /sys/devices/system/edac/mc/mc1/rank5/size:2048
> > /sys/devices/system/edac/mc/mc1/rank6/size:2048
> > /sys/devices/system/edac/mc/mc1/rank7/size:2048
> >
> > Here, the number of ranks are ok, but the size is wrong.
> >
> > This is what the edac debug logs say:
> >
> > [ 18.829184] EDAC amd64: F10h detected (node 0).
> > [ 18.829206] EDAC MC: DCT0 chip selects:
> > [ 18.829207] EDAC amd64: MC: 0: 0MB 1: 0MB
> > [ 18.829219] EDAC amd64: MC: 2: 1024MB 3: 1024MB
> > [ 18.829220] EDAC amd64: MC: 4: 0MB 5: 0MB
> > [ 18.829221] EDAC amd64: MC: 6: 1024MB 7: 1024MB
> > [ 18.829222] EDAC MC: DCT1 chip selects:
> > [ 18.829223] EDAC amd64: MC: 0: 0MB 1: 0MB
> > [ 18.829223] EDAC amd64: MC: 2: 1024MB 3: 1024MB
> > [ 18.829224] EDAC amd64: MC: 4: 0MB 5: 0MB
> > [ 18.829225] EDAC amd64: MC: 6: 1024MB 7: 1024MB
> >
> > [ 18.923914] EDAC amd64: F10h detected (node 1).
> > [ 18.956025] EDAC MC: DCT0 chip selects:
> > [ 18.956028] EDAC amd64: MC: 0: 0MB 1: 0MB
> > [ 18.962055] EDAC amd64: MC: 2: 1024MB 3: 1024MB
> > [ 18.968167] EDAC amd64: MC: 4: 0MB 5: 0MB
> > [ 18.974252] EDAC amd64: MC: 6: 1024MB 7: 1024MB
> > [ 18.980333] EDAC MC: DCT1 chip selects:
> > [ 18.980335] EDAC amd64: MC: 0: 0MB 1: 0MB
> > [ 18.986415] EDAC amd64: MC: 2: 1024MB 3: 1024MB
> > [ 18.991454] EDAC amd64: MC: 4: 0MB 5: 0MB
> > [ 18.996155] EDAC amd64: MC: 6: 1024MB 7: 1024MB
> > [ 19.000854] EDAC amd64: using x8 syndromes.
> >
> > Here, everything is fine.
>
> So, actually to satisfy the new api, you'll probably need to stick down
> this information above, i.e. the chip selects *per* DCT which equals
> also the ranks.
>
Yes. Basically, we should revert this patchset:
commit 16a528ee3975c860dc93fbfc718fe9aa25ed92bc
Author: Borislav Petkov <borislav.pet...@amd.com>
Date: Thu Sep 13 18:53:58 2012 +0200
And fill dimm->nr_pages with:
dimm->nr_pages = nr_pages / pvt->channel_count;
This way, both new API and the old API will reflect the right size.
The patch below does that. The memory is now properly shown:
memory controller 0:
/sys/devices/system/edac/mc/mc0/size_mb:8192
/sys/devices/system/edac/mc/mc0/csrow2/size_mb:2048
/sys/devices/system/edac/mc/mc0/csrow3/size_mb:2048
/sys/devices/system/edac/mc/mc0/csrow6/size_mb:2048
/sys/devices/system/edac/mc/mc0/csrow7/size_mb:2048
/sys/devices/system/edac/mc/mc0/rank4/size:1024
/sys/devices/system/edac/mc/mc0/rank5/size:1024
/sys/devices/system/edac/mc/mc0/rank6/size:1024
/sys/devices/system/edac/mc/mc0/rank7/size:1024
/sys/devices/system/edac/mc/mc0/rank12/size:1024
/sys/devices/system/edac/mc/mc0/rank13/size:1024
/sys/devices/system/edac/mc/mc0/rank14/size:1024
/sys/devices/system/edac/mc/mc0/rank15/size:1024
memory controller 1:
/sys/devices/system/edac/mc/mc1/size_mb:8192
/sys/devices/system/edac/mc/mc1/csrow2/size_mb:2048
/sys/devices/system/edac/mc/mc1/csrow3/size_mb:2048
/sys/devices/system/edac/mc/mc1/csrow6/size_mb:2048
/sys/devices/system/edac/mc/mc1/csrow7/size_mb:2048
/sys/devices/system/edac/mc/mc1/rank4/size:1024
/sys/devices/system/edac/mc/mc1/rank5/size:1024
/sys/devices/system/edac/mc/mc1/rank6/size:1024
/sys/devices/system/edac/mc/mc1/rank7/size:1024
/sys/devices/system/edac/mc/mc1/rank12/size:1024
/sys/devices/system/edac/mc/mc1/rank13/size:1024
/sys/devices/system/edac/mc/mc1/rank14/size:1024
/sys/devices/system/edac/mc/mc1/rank15/size:1024
-
[PATCH] Fix dimm size on amd64_edac
The amd64_edac was filling the csrow size with a wrong value. This
commit tried to addres such issue:
commit 16a528ee3975c860dc93fbfc718fe9aa25ed92bc
Author: Borislav Petkov <borislav.pet...@amd.com>
Date: Thu Sep 13 18:53:58 2012 +0200
The approach taken were to directly store a csrow size value on a
separate variable, instead of calculating it by summing the size of
each rank. So, it fixed the report with the old API. However, it
didn't address the root cause: the dimm->nr_pages was being filled
with twice the memory, if the memory controller is using two DCTs.
The proper fix is to fill dimm->nr_pages with:
dimm->nr_pages = nr_pages / pvt->channel_count;
As csrow_size_show() and mci_size_mb_show() calculates the sum
of ranks per csrow with:
for (i = 0; i < csrow->nr_channels; i++)
nr_pages += csrow->channels[i]->dimm->nr_pages;
The EDAC core will warrant that both APIs will always report the
same memory size.
Signed-off-by: Mauro Carvalho Chehab <mche...@redhat.com>
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 910b011..074657d 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -2072,9 +2072,8 @@ static int init_csrows(struct mem_ctl_info *mci)
dimm = csrow->channels[j]->dimm;
dimm->mtype = mtype;
dimm->edac_mode = edac_mode;
- dimm->nr_pages = nr_pages;
+ dimm->nr_pages = nr_pages / pvt->channel_count;
}
- csrow->nr_pages = nr_pages;
}
return empty;
diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c
index 4f4b613..5463ed3 100644
--- a/drivers/edac/edac_mc_sysfs.c
+++ b/drivers/edac/edac_mc_sysfs.c
@@ -180,9 +180,6 @@ static ssize_t csrow_size_show(struct device *dev,
int i;
u32 nr_pages = 0;
- if (csrow->mci->csbased)
- return sprintf(data, "%u\n", PAGES_TO_MiB(csrow->nr_pages));
-
for (i = 0; i < csrow->nr_channels; i++)
nr_pages += csrow->channels[i]->dimm->nr_pages;
return sprintf(data, "%u\n", PAGES_TO_MiB(nr_pages));
@@ -778,14 +775,10 @@ static ssize_t mci_size_mb_show(struct device *dev,
for (csrow_idx = 0; csrow_idx < mci->nr_csrows; csrow_idx++) {
struct csrow_info *csrow = mci->csrows[csrow_idx];
- if (csrow->mci->csbased) {
- total_pages += csrow->nr_pages;
- } else {
- for (j = 0; j < csrow->nr_channels; j++) {
- struct dimm_info *dimm =
csrow->channels[j]->dimm;
+ for (j = 0; j < csrow->nr_channels; j++) {
+ struct dimm_info *dimm = csrow->channels[j]->dimm;
- total_pages += dimm->nr_pages;
- }
+ total_pages += dimm->nr_pages;
}
}
diff --git a/include/linux/edac.h b/include/linux/edac.h
index 4fd4999..ab1ea98 100644
--- a/include/linux/edac.h
+++ b/include/linux/edac.h
@@ -561,7 +561,6 @@ struct csrow_info {
u32 ue_count; /* Uncorrectable Errors for this csrow */
u32 ce_count; /* Correctable Errors for this csrow */
- u32 nr_pages; /* combined pages count of all channels */
struct mem_ctl_info *mci; /* the parent */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
