[1.] Segfault reading SCSI MO - System hang while writing
[2.] Hello *
with kernel 2.4.x (actually 2.4.3) i ran into a problem acessing my SCSI MO.
As everything works fine with 2.2.x (actually 19) the problem seems to be new
in the 2.4.x kernel series and therefore you might want to take a look.
I can mount the MO (/dev/sda) as /mnt/mod fs:vfat and do a ls with no problem
or warning and i can cd to the directories of the MO. But if i try to open a
file for example to copy it to somewhere i get a segfault. A try to write to
it is even more worse, my system hangs immediately. After the error the
device can't be unmounted any more.
I don't think that the problem is in the hardware related driver (sym53c8xx)
because i tried it with the ncr53c8xx and 53c7,8xx too with the same result.
What i tried also is to mount the MO as msdos and umsdos and it produced the
segfault too.
[3.] SCSI vfat 53c810 MO
[4.] Linux version 2.4.3 (root@camelot) (gcc version 2.95.2 19991024
(release)) #4 Wed Apr 18 15:09:02 CEST 2001
[5.] ksymoops.out
[6.] cp /mnt/mod/somefile /tmp -> Segfault cp somefile /mnt/mod/somefile
-> crash
[7.] Environment
[7.1.] ver_linux.out
[7.2.] cpuinfo.out
[7.3.] modules.out
[7.4.] ioports.out, iomem.out
[7.5.] lspci.out
[7.6.] scsi.out
greetings
Thomas Herberg
Email: [EMAIL PROTECTED]
ksymoops 2.4.0 on i686 2.4.3. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.3/ (default)
-m /boot/System.map-2.4.3 (default)
Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
Apr 19 17:35:07 camelot kernel: Unable to handle kernel NULL pointer dereference at
virtual address 00000000
Apr 19 17:35:07 camelot kernel: 00000000
Apr 19 17:35:07 camelot kernel: *pde = 00000000
Apr 19 17:35:07 camelot kernel: Oops: 0000
Apr 19 17:35:07 camelot kernel: CPU: 0
Apr 19 17:35:07 camelot kernel: EIP: 0010:[<00000000>]
Using defaults from ksymoops -t elf32-i386 -a i386
Apr 19 17:35:07 camelot kernel: EFLAGS: 00010286
Apr 19 17:35:07 camelot kernel: eax: 00000000 ebx: c68352a0 ecx: 00001000 edx:
c68352c0
Apr 19 17:35:07 camelot kernel: esi: bfffe19c edi: 00000000 ebp: 00001000 esp:
c0a9ff80
Apr 19 17:35:07 camelot kernel: ds: 0018 es: 0018 ss: 0018
Apr 19 17:35:07 camelot kernel: Process cp (pid: 1383, stackpage=c0a9f000)
Apr 19 17:35:07 camelot kernel: Stack: c014e68d c68352a0 bfffe19c 00001000 c68352c0
c68352a0 ffffffea c012bc06
Apr 19 17:35:07 camelot kernel: c68352a0 bfffe19c 00001000 c68352c0 c0a9e000
bffff694 bfffe19c bffff244
Apr 19 17:35:07 camelot kernel: c0106d5f 00000003 bfffe19c 00001000 bffff694
bfffe19c bffff244 00000003
Apr 19 17:35:07 camelot kernel: Call Trace: [fat_file_read+45/52] [sys_read+150/204]
[system_call+51/56]
Apr 19 17:35:07 camelot kernel: Code: Bad EIP value.
>>EIP; 00000000 Before first symbol
1 warning issued. Results may not be reliable.
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux camelot 2.4.3 #4 Wed Apr 18 15:09:02 CEST 2001 i686 unknown
Gnu C 2.95.2
Gnu make 3.79.1
binutils 2.10.0.33
util-linux 2.10q
modutils 2.4.2
e2fsprogs 1.19
PPP 2.4.0
isdn4k-utils 3.1pre1a
Linux C Library x 1 root root 1382179 Jan 19 07:14 /lib/libc.so.6
Dynamic linker (ldd) 2.2
Procps 2.0.7
Net-tools 1.57
Kbd 1.02
Sh-utils 2.0
Modules Loaded sb sb_lib uart401 sound soundcore isa-pnp af_packet hisax isdn
ipchains ntfs
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 6
model name : Celeron (Mendocino)
stepping : 0
cpu MHz : 334.098
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36
mmx fxsr
bogomips : 666.82
sb 7376 0 (autoclean)
sb_lib 33728 0 (autoclean) [sb]
uart401 6384 0 (autoclean) [sb_lib]
sound 56976 0 (autoclean) [sb_lib uart401]
soundcore 3952 5 (autoclean) [sb_lib sound]
isa-pnp 28016 0 (autoclean) [sb]
af_packet 7968 1 (autoclean)
hisax 135760 4
isdn 84720 6 [hisax]
ipchains 31584 0 (unused)
ntfs 35472 1 (autoclean)
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0213-0213 : isapnp read
0220-022f : soundblaster
02f8-02ff : serial(auto)
0300-030f : 3c509
0330-0333 : MPU-401 UART
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0a79-0a79 : isapnp write
0cf8-0cff : PCI conf1
4000-403f : Intel Corporation 82371AB PIIX4 ACPI
5000-501f : Intel Corporation 82371AB PIIX4 ACPI
e000-e01f : Intel Corporation 82371AB PIIX4 USB
e400-e4ff : Symbios Logic Inc. (formerly NCR) 53c810
e400-e47f : sym53c8xx
e800-e81f : AVM Audiovisuelles MKTG & Computer System GmbH A1 ISDN [Fritz]
e800-e81f : avm PCI
f000-f00f : Intel Corporation 82371AB PIIX4 IDE
f000-f007 : ide0
f008-f00f : ide1
00000000-0009efff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-07ffffff : System RAM
00100000-001e7c1f : Kernel code
001e7c20-00244f6f : Kernel data
d0000000-d3ffffff : Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge
d4000000-d5ffffff : PCI Bus #01
d4000000-d4ffffff : nVidia Corporation Riva TnT 128 [NV04]
d6000000-d6ffffff : PCI Bus #01
d6000000-d6ffffff : nVidia Corporation Riva TnT 128 [NV04]
d7000000-d70000ff : Symbios Logic Inc. (formerly NCR) 53c810
d7001000-d700101f : AVM Audiovisuelles MKTG & Computer System GmbH A1 ISDN [Fritz]
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 03)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: d4000000-d5ffffff
Prefetchable memory behind bridge: d6000000-d6ffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+
00:02.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
00:02.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80
[Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at f000 [size=16]
00:02.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) (prog-if 00
[UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at e000 [size=32]
00:02.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:0e.0 SCSI storage controller: Symbios Logic Inc. (formerly NCR) 53c810 (rev 12)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 16000ns max), cache line size 08
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at e400 [size=256]
Region 1: Memory at d7000000 (32-bit, non-prefetchable) [size=256]
00:10.0 Network controller: AVM Audiovisuelles MKTG & Computer System GmbH A1 ISDN
[Fritz] (rev 02)
Subsystem: AVM Audiovisuelles MKTG & Computer System GmbH FRITZ!Card ISDN
Controller
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 9
Region 0: Memory at d7001000 (32-bit, non-prefetchable) [size=32]
Region 1: I/O ports at e800 [size=32]
01:00.0 VGA compatible controller: nVidia Corporation Riva TnT 128 [NV04] (rev 04)
(prog-if 00 [VGA])
Subsystem: Creative Labs Graphics Blaster CT6710
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d6000000 (32-bit, prefetchable) [size=16M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 1.0
Status: RQ=15 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
Attached devices:
Host: scsi0 Channel: 00 Id: 03 Lun: 00
Vendor: YAMAHA Model: CRW8424S Rev: 1.0j
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: FUJITSU Model: MCF3064SS Rev: 0020
Type: Optical Device ANSI SCSI revision: 02
