This add the 1-wire chip present on the CM board to the DTS.
As the pin is also used by leds, tt's disabled by default.
If the board really wants it, it can be enabled in the board DTS.
Signed-off-by: Richard Genoud <richard.gen...@gmail.com>
---
arch/arm/boot/dts/at91sam9x5cm.dtsi | 20 ++++++++++++++++++++
1 files changed, 20 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi
b/arch/arm/boot/dts/at91sam9x5cm.dtsi
index 4027ac7..347a74a 100644
--- a/arch/arm/boot/dts/at91sam9x5cm.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi
@@ -24,6 +24,16 @@
};
ahb {
+ apb {
+ pinctrl@fffff400 {
+ 1wire_cm {
+ pinctrl_1wire_cm: 1wire_cm-0 {
+ atmel,pins = <1 18 0x0 0x2>; /*
PB18 multidrive, conflicts with led */
+ };
+ };
+ };
+ };
+
nand0: nand@40000000 {
nand-bus-width = <8>;
nand-ecc-mode = "hw";
@@ -74,4 +84,14 @@
gpios = <&pioD 21 0>;
};
};
+
+ 1wire_cm {
+ compatible = "w1-gpio";
+ gpios = <&pioB 18 0>;
+ linux,open-drain;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_1wire_cm>;
+ status = "okay";
+ };
+
};
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
