Use usbhs_init_phys() to register the PHY's RESET regulator
and the NOP PHY device.
Signed-off-by: Roger Quadros <rog...@ti.com>
---
arch/arm/mach-omap2/board-omap3touchbook.c | 17 ++++++++++-------
1 files changed, 10 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c
b/arch/arm/mach-omap2/board-omap3touchbook.c
index bcd44fb..7da48bc 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -305,21 +305,22 @@ static struct omap_board_mux board_mux[] __initdata = {
};
#endif
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 2,
+ .reset_gpio = 147,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct platform_device *omap3_touchbook_devices[] __initdata = {
&leds_gpio,
&keys_gpio,
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = 147,
- .reset_gpio_port[2] = -EINVAL
};
static void omap3_touchbook_poweroff(void)
@@ -368,6 +369,8 @@ static void __init omap3_touchbook_init(void)
omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
board_nand_init(omap3touchbook_nand_partitions,
ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS,
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
