Hello David Hinds, Hello Kernelhackers,
sorry that I also directly contact you.
But I'am very confused, at the moment.
My Hardware:
Toshiba Satellite Pro 4280
PCMCIA: Xircom RBEM56G-100
When I use SuSE 7.1 and Kernel 2.4.2 (SuSE) the card
is recognized and network works, also configured via DHCP.
(tulib_cb,serial_cb , perhaps from pcmcia-cs )
But now I want to use Kernel 2.4.3-ac12, because of the
new module, which I've heard/read is better than the old drivers.
O.K., here what I done:
build yenta_socket,xircom_cb,serial_cs,pcmcia_core,..
Modified /etc/pcmcia/config:
device "xircom_cb"
class "network" module "cb_enabler", "xircom_cb"
card "Xircom CBEM56G-100 CardBus 10/100 Ethernet + 56K Modem"
manfid 0x0105, 0x0103
bind "xircom_cb" to 0, "serial_cs" to 1
Linus said serial_cs is for both, old serial_cb & serial_cs.
But when I start the notebook with the same /etc/init.d/pcmcia
I get this:
Apr 22 21:34:36 T50179768G kernel: PCI: Enabling device 14:00.1
(0000 -> 0003)
Apr 22 21:34:36 T50179768G cardmgr[206]: initializing socket 0
Apr 22 21:34:36 T50179768G cardmgr[206]: socket 0: Xircom
CBEM56G-100 CardBus 10
/100 Ethernet + 56K Modem
Apr 22 21:34:36 T50179768G cardmgr[206]: executing: 'modprobe
cb_enabler'
Apr 22 21:34:36 T50179768G cardmgr[206]: executing: 'modprobe
xircom_cb'
Apr 22 21:34:36 T50179768G kernel: PCI: Setting latency timer of
device 14:00.0
to 64
Apr 22 21:34:36 T50179768G kernel: eth0: Xircom cardbus revision 3
at irq 11
Apr 22 21:34:36 T50179768G cardmgr[206]: executing: 'modprobe
serial_cs'
Apr 22 21:34:36 T50179768G kernel: Serial driver version 5.05a
(2001-03-20) with
MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
Apr 22 21:34:36 T50179768G kernel: ttyS00 at 0x03f8 (irq = 4) is a
16550A
Apr 22 21:34:36 T50179768G cardmgr[206]: executing: './network
start xircom_cb'
Apr 22 21:34:36 T50179768G kernel: serial_cs: ParseTuple: No more
items
Apr 22 21:34:36 T50179768G cardmgr[206]: + xircom_cb: error
fetching interface i
nformation: Device not found
Apr 22 21:34:37 T50179768G cardmgr[206]: + /sbin/ifconfig xircom_cb
up
Apr 22 21:34:37 T50179768G cardmgr[206]: + xircom_cb: unknown
interface: No such
device
Apr 22 21:34:37 T50179768G dhcpcd[1115]: dhcpStart: ioctl
SIOCGIFHWADDR: No such
device
Apr 22 21:34:37 T50179768G cardmgr[206]: + /sbin/dhcpcd
xircom_cb >/dev/null 2>
&1
Apr 22 21:34:37 T50179768G cardmgr[206]: executing: './serial
start xircom_cb'
Apr 22 21:34:37 T50179768G cardmgr[206]: + expr: syntax error
Apr 22 21:34:37 T50179768G cardmgr[206]: + ./MAKEDEV xircom_cb
Apr 22 21:34:37 T50179768G cardmgr[206]: + ./serial: ./MAKEDEV:
No such file or
directory
Apr 22 21:34:37 T50179768G cardmgr[206]: + /dev/xircom_cb: No
such file or direc
tory
It is possible I missed something essential?
More information added below.
Would it a good idea to split pcmcia-cs package?
One for use with kernel 2.4, without client-modules
and one for kernel 2.2.x with all modules?
Because of the different names and modules ?
-------------------------
pcmcia-cs 3.1.22 & 3.1.25 (same problem, cardmgr have the same
version number)
What to do?
thanks for any hints or help.
bye
Waldemar
--
* A good website for linuxsoftware: | (o_ *
* http://www.freshmeat.net | //\ *
* Linux rulez! ;-) | V_/_ *
* GnuPG-Key: 0xBE21BD90 | Tux: #155220 | ICQ: 64035650 *
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 03)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Flags: bus master, medium devsel, latency 64
Memory at e0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 1.0
00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 03)
(prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Memory behind bridge: f0000000-f7ffffff
00:05.0 Bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
Flags: bus master, medium devsel, latency 0
00:05.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80
[Master])
Flags: bus master, medium devsel, latency 64
I/O ports at fff0 [size=16]
00:05.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) (prog-if 00
[UHCI])
Flags: bus master, medium devsel, latency 64, IRQ 11
I/O ports at ff80 [size=32]
00:05.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 03)
Flags: medium devsel, IRQ 9
00:07.0 Communication controller: Lucent Microelectronics 56k WinModem (rev 01)
Subsystem: Toshiba America Info Systems Internal V.90 Modem
Flags: bus master, medium devsel, latency 0, IRQ 3
Memory at ffefff00 (32-bit, non-prefetchable) [size=256]
I/O ports at 02f8 [size=8]
I/O ports at 1c00 [size=256]
Capabilities: [f8] Power Management version 2
00:09.0 IRDA controller: Toshiba America Info Systems FIR Port Type-DO
Subsystem: Toshiba America Info Systems FIR Port Type-DO
Flags: bus master, slow devsel, latency 64, IRQ 11
I/O ports at ff60 [size=32]
Capabilities: [80] Power Management version 2
00:0b.0 CardBus bridge: Toshiba America Info Systems ToPIC95 PCI to Cardbus Bridge
with ZV Support (rev 20)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Flags: bus master, slow devsel, latency 168, IRQ 11
Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=14, subordinate=14, sec-latency=0
Memory window 0: 10400000-107ff000 (prefetchable)
Memory window 1: 10800000-10bff000
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
16-bit legacy interface ports at 0001
00:0b.1 CardBus bridge: Toshiba America Info Systems ToPIC95 PCI to Cardbus Bridge
with ZV Support (rev 20)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Flags: bus master, slow devsel, latency 168, IRQ 11
Memory at 10001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=15, subordinate=15, sec-latency=0
Memory window 0: 10c00000-10fff000 (prefetchable)
Memory window 1: 11000000-113ff000
I/O window 0: 00001800-000018ff
I/O window 1: 00002000-000020ff
16-bit legacy interface ports at 0001
00:0c.0 Multimedia audio controller: Yamaha Corporation YMF-744B [DS-1S Audio
Controller] (rev 02)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at efff8000 (32-bit, non-prefetchable) [size=32K]
I/O ports at ff00 [size=64]
I/O ports at fefc [size=4]
Capabilities: [50] Power Management version 1
01:00.0 VGA compatible controller: S3 Inc. 86C270-294 Savage/MX-/IX (rev 11) (prog-if
00 [VGA])
Subsystem: Toshiba America Info Systems: Unknown device 0001
Flags: bus master, 66Mhz, medium devsel, latency 248, IRQ 11
Memory at f0000000 (32-bit, non-prefetchable) [size=128M]
Expansion ROM at 000c0000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Capabilities: [80] AGP version 1.0
14:00.0 Ethernet controller: Xircom Cardbus Ethernet 10/100 (rev 03)
Subsystem: Xircom Cardbus Ethernet 10/100
Flags: bus master, medium devsel, latency 64, IRQ 11
I/O ports at 1000 [size=128]
Memory at 10800000 (32-bit, non-prefetchable) [size=2K]
Memory at 10800800 (32-bit, non-prefetchable) [size=2K]
Expansion ROM at 10400000 [size=16K]
Capabilities: [dc] Power Management version 1
14:00.1 Serial controller: Xircom Cardbus Ethernet + 56k Modem (rev 03) (prog-if 02
[16550])
Subsystem: Xircom CBEM56G-100 Ethernet + 56k Modem
Flags: medium devsel, IRQ 11
I/O ports at 1080 [size=8]
Memory at 10801000 (32-bit, non-prefetchable) [size=2K]
Memory at 10801800 (32-bit, non-prefetchable) [size=2K]
Expansion ROM at 10404000 [size=16K]
Capabilities: [dc] Power Management version 1
Linux version 2.4.3-ac12 (root@hawkeye) (gcc version 2.95.4 20010319 (Debian
prerelease)) #4 Sun Apr 22 21:08:07 CEST 2001
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007fe0000 (usable)
BIOS-e820: 0000000007fe0000 - 0000000007ff0000 (ACPI data)
BIOS-e820: 0000000007ff0000 - 0000000008000000 (reserved)
BIOS-e820: 00000000100a0000 - 00000000100b6e00 (reserved)
BIOS-e820: 00000000100b6e00 - 00000000100b7000 (ACPI NVS)
BIOS-e820: 00000000100b7000 - 0000000010100000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
On node 0 totalpages: 32736
zone(0): 4096 pages.
zone(1): 28640 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=Testkernel ro root=304
BOOT_FILE=/boot/vmlinuz-2.4.3-ac12
Initializing CPU#0
Detected 497.568 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 992.87 BogoMIPS
Memory: 126892k/130944k available (938k kernel code, 3664k reserved, 242k data, 64k
init, 0k highmem)
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfee03, last bus=21
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router PIIX [8086/7110] at 00:05.0
PCI: Found IRQ 11 for device 00:0b.0
PCI: The same IRQ used for device 01:00.0
PCI: Found IRQ 11 for device 00:0b.1
PCI: The same IRQ used for device 00:0c.0
got res[10000000:10000fff] for resource 0 of PCI device 1179:0617
got res[10001000:10001fff] for resource 0 of PCI device 1179:0617
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.14)
Starting kswapd v1.8
pty: 256 Unix98 ptys configured
block: queued sectors max/low 84266kB/28088kB, 256 slots per queue
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 29
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
hda: TOSHIBA MK6014MAP, ATA DISK drive
hdc: CD-224E-B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 11733120 sectors (6007 MB), CHS=730/255/63
hdc: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: hda1 hda2 hda3 hda4
Floppy drive(s): fd0 is 1.44M
FDC 0 is an 8272A
Real Time Clock Driver v1.10d
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
fatfs: bogus cluster size
fatfs: bogus cluster size
reiserfs: checking transaction log (device 03:04) ...
Using r5 hash to sort names
reiserfs: using 3.5.x disk format
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 64k freed
Adding Swap: 265064k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
Linux PCMCIA Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 00:0b.0
PCI: The same IRQ used for device 01:00.0
PCI: Found IRQ 11 for device 00:0b.1
PCI: The same IRQ used for device 00:0c.0
Yenta IRQ list 04b0, PCI irq11
Socket status: 30000020
Yenta IRQ list 04b0, PCI irq11
Socket status: 30000007
cs: cb_alloc(bus 20): vendor 0x115d, device 0x0003
got res[1000:107f] for resource 0 of PCI device 115d:0003
got res[10800000:108007ff] for resource 1 of PCI device 115d:0003
got res[10800800:10800fff] for resource 2 of PCI device 115d:0003
got res[10400000:10403fff] for resource 6 of PCI device 115d:0003
PCI: Enabling device 14:00.0 (0000 -> 0003)
got res[1080:1087] for resource 0 of PCI device 115d:0103
got res[10801000:108017ff] for resource 1 of PCI device 115d:0103
got res[10801800:10801fff] for resource 2 of PCI device 115d:0103
got res[10404000:10407fff] for resource 6 of PCI device 115d:0103
PCI: Enabling device 14:00.1 (0000 -> 0003)
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x330-0x337 0x378-0x37f 0x3f8-0x3ff
0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
PCI: Setting latency timer of device 14:00.0 to 64
eth0: Xircom cardbus revision 3 at irq 11
Serial driver version 5.05a (2001-03-20) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP
enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
serial_cs: ParseTuple: No more items
usb-uhci.c: $Revision: 1.251 $ time 21:10:52 Apr 22 2001
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:05.2
usb-uhci.c: USB UHCI at I/O 0xff80, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver hid
mice: PS/2 mouse device common for all mice
0x378: FIFO is 16 bytes
0x378: writeIntrThreshold is 8
0x378: readIntrThreshold is 8
0x378: PWord is 8 bits
0x378: Interrupts are ISA-Pulses
0x378: ECP port cfgA=0x10 cfgB=0x4b
0x378: ECP settings irq=7 dma=3
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,ECP]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
lp0: using parport0 (polling).
Module Size Used by
serial_cs 4416 0 (unused)
serial 43264 0 [serial_cs]
xircom_cb 4944 0 (unused)
cb_enabler 2368 0 (unused)
parport_pc 18512 1 (autoclean)
lp 4880 0 (autoclean)
parport 24320 1 (autoclean) [parport_pc lp]
mousedev 3808 0 (unused)
hid 11536 0 (unused)
input 3200 0 [mousedev hid]
usb-uhci 21552 0 (unused)
ds 6384 2 [serial_cs cb_enabler]
yenta_socket 8272 2
pcmcia_core 38080 0 [serial_cs cb_enabler ds yenta_socket]
usbcore 46224 1 (autoclean) [hid usb-uhci]
PGP signature
