From: Jingbai Ma <jingbai...@hp.com> Subject: makedumpfile mmap() benchmark Date: Wed, 27 Mar 2013 13:51:37 +0800
> Hi, > > I have tested the makedumpfile mmap patch on a machine with 2TB > memory, here is testing results: Thanks for your benchmark. It's very helpful to see the benchmark on different environments. > Test environment: > Machine: HP ProLiant DL980 G7 with 2TB RAM. > CPU: Intel(R) Xeon(R) CPU E7- 2860 @ 2.27GHz (8 sockets, 10 cores) > (Only 1 cpu was enabled the 2nd kernel) > Kernel: 3.9.0-rc3+ with mmap kernel patch v3 > vmcore size: 2.0TB > Dump file size: 3.6GB > makedumpfile mmap branch with parameters: -c --message-level 23 -d 31 > --map-size <map-size> To reduce the benchmark time, I recommend LZO or snappy compressions rather than zlib. zlib is used when -c option is specified, and it's too slow for use of crash dump. To build makedumpfile with each compression format supports, do USELZO=on or USESNAPPY=on after installing necessary libraries. > All measured time from debug message of makedumpfile. > > As a comparison, I also have tested with original kernel and original > makedumpfile 1.5.1 and 1.5.3. > I added all [Excluding unnecessary pages] and [Excluding free pages] > time together as "Filter Pages", and [Copyying Data] as "Copy data" > here. > > makedumjpfile Kernel map-size (KB) Filter pages (s) Copy data (s) > Total (s) > 1.5.1 3.7.0-0.36.el7.x86_64 N/A 940.28 1269.25 2209.53 > 1.5.3 3.7.0-0.36.el7.x86_64 N/A 380.09 992.77 1372.86 > 1.5.3 v3.9-rc3 N/A 197.77 892.27 1090.04 > 1.5.3+mmap v3.9-rc3+mmap 0 164.87 606.06 770.93 > 1.5.3+mmap v3.9-rc3+mmap 4 88.62 576.07 664.69 > 1.5.3+mmap v3.9-rc3+mmap 1024 83.66 477.23 560.89 > 1.5.3+mmap v3.9-rc3+mmap 2048 83.44 477.21 560.65 > 1.5.3+mmap v3.9-rc3+mmap 10240 83.84 476.56 560.4 Did you calculate "Filter pages" by adding two [Excluding unnecessary pages] lines? The first one of the two line is displayed by get_num_dumpable_cyclic() during the calculation of the total number of dumpable pages, which is later used to print progress of writing pages in percentage. For example, here is the log, where the number of cycles is 3, and mem_map (16399) mem_map : ffffea0801e00000 pfn_start : 20078000 pfn_end : 20080000 read /proc/vmcore with mmap() STEP [Excluding unnecessary pages] : 13.703842 seconds <-- this part is by get_num_dumpable_cyclic() STEP [Excluding unnecessary pages] : 13.842656 seconds STEP [Excluding unnecessary pages] : 6.857910 seconds STEP [Excluding unnecessary pages] : 13.554281 seconds <-- this part is by the main filtering processing. STEP [Excluding unnecessary pages] : 14.103593 seconds STEP [Excluding unnecessary pages] : 7.114239 seconds STEP [Copying data ] : 138.442116 seconds Writing erase info... offset_eraseinfo: 1f4680e40, size_eraseinfo: 0 Original pages : 0x000000001ffc28a4 <cut> So, get_num_dumpable_cyclic() actually does filtering operation but it should not be included here. If so, I guess each measured time would be about 42 seconds, right? Then, it's almost same as the result I posted today: 35 seconds. Thanks. HATAYAMA, Daisuke -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
