From: Patrice Chotard <[email protected]> This fix allows to correctly select default and alternate pin mode.
By default for all ABx500 family chip, pin default mode is selected by clearing corresponding bit in GPIOSELx register except for pins which support alternate function, in this case, corresponding bit must be set. But, due to an unlogical hardware implementation, for one particular pin (GPIO11) reverse setting must be done. For that, update the alternate function array by declaring that this pin supports alternate function. Reported-by: Ramesh Chandrasekaran <[email protected]> Signed-off-by: Patrice Chotard <[email protected]> Signed-off-by: Linus Walleij <[email protected]> --- drivers/pinctrl/pinctrl-ab8505.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/pinctrl-ab8505.c b/drivers/pinctrl/pinctrl-ab8505.c index 3a4238e..8ae076a 100644 --- a/drivers/pinctrl/pinctrl-ab8505.c +++ b/drivers/pinctrl/pinctrl-ab8505.c @@ -284,7 +284,7 @@ struct alternate_functions ab8505_alternate_functions[AB8505_GPIO_MAX_NUMBER + 1 ALTERNATE_FUNCTIONS(9, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO9, bit 0 reserved */ ALTERNATE_FUNCTIONS(10, 1, 0, UNUSED, 1, 0, 0), /* GPIO10, altA and altB controlled by bit 0 */ - ALTERNATE_FUNCTIONS(11, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO11, altA controlled by bit 2 */ + ALTERNATE_FUNCTIONS(11, 2, 1, UNUSED, 0, 0, 0), /* GPIO11, altA controlled by bit 2 */ ALTERNATE_FUNCTIONS(12, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO12, bit3 reseved */ ALTERNATE_FUNCTIONS(13, 4, 3, 4, 1, 0, 2), /* GPIO13, altA altB and altC controlled by bit 3 and 4 */ ALTERNATE_FUNCTIONS(14, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO14, altA controlled by bit 5 */ -- 1.7.11.3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
