On Mon, Apr 08, 2013 at 12:12:20PM +0200, Hector Palacios wrote: > MicroSD card sockets don't usually have card detect line. This pin > is actually not needed for the MMC to work and it is more of a > platform design decission to have it. > The card detect pin already has a configuration entry of its own: > 'mmc0_cd_cfg' so we complete the iomux configuration here and let > platforms to include it or not depending on whether the card detect > line is routed to the SD socket. > Sounds sensible.
> Signed-off-by: Hector Palacios <hector.palac...@digi.com> > --- > > Hello, > > All imx28 based platforms except 'bluegiga,apx4devkit' and > 'schulercontrol,imx28-sps1', use 'mmc0_cd_cfg' in their mmc configuration > so please check whether this patch would break these platforms. > I just tested the patch on imx28-evk and card-detection still works. So patches applied, thanks. Shawn > arch/arm/boot/dts/imx28.dtsi | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi > index 9b18e81..4222e4e 100644 > --- a/arch/arm/boot/dts/imx28.dtsi > +++ b/arch/arm/boot/dts/imx28.dtsi > @@ -449,7 +449,6 @@ > 0x2060 /* > MX28_PAD_SSP0_DATA6__SSP0_D6 */ > 0x2070 /* > MX28_PAD_SSP0_DATA7__SSP0_D7 */ > 0x2080 /* > MX28_PAD_SSP0_CMD__SSP0_CMD */ > - 0x2090 /* > MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */ > 0x20a0 /* > MX28_PAD_SSP0_SCK__SSP0_SCK */ > >; > fsl,drive-strength = <1>; > @@ -465,7 +464,6 @@ > 0x2020 /* > MX28_PAD_SSP0_DATA2__SSP0_D2 */ > 0x2030 /* > MX28_PAD_SSP0_DATA3__SSP0_D3 */ > 0x2080 /* > MX28_PAD_SSP0_CMD__SSP0_CMD */ > - 0x2090 /* > MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */ > 0x20a0 /* > MX28_PAD_SSP0_SCK__SSP0_SCK */ > >; > fsl,drive-strength = <1>; > @@ -477,6 +475,8 @@ > fsl,pinmux-ids = < > 0x2090 /* > MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */ > >; > + fsl,drive-strength = <1>; > + fsl,voltage = <1>; > fsl,pull-up = <0>; > }; > > -- > 1.8.2 > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/